Used Knife Setting Device for sale (20,311)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Podowc Nvgepfx Ab Ijgw Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood Pgjdpfx Absxmv H Rs Iow - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: new, Year of construction: 2025, Scraper knife Model: WEIMA, GROSS, UNTHA Type: ZM40, ZMK50, GZ40, RS40, RS50 Year of manufacture: 2025 New / ready for immediate use 1. 8Z-86 knife 2. 4Z-86 knife We are a manufacturer of replacement knives and spare parts for crushers and shredders. Pjdjxn Iyfspfx Ab Ijgw

Condition: good (used), continuous welding machine, film welding machine Pgedpfx Aovyq Duob Iow -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Condition: good (used), Internal article no.: 24089 Hot melt adhesive system Consisting of: 2x hot melt adhesive tank units (Dynamelt 505 / BJ:04) 15 pcs. Material hoses Various hot melt adhesive application heads (Dynatec BF) Operating instructions Technical data, see pictures Pjdpfx Aefkgycjb Iegw

Condition: ready for operation (used), functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Psdpfoufcnqjx Ab Isgw Main cutting edges up to 25° Motor 1, 1 kW

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: Pjdpsxvxwksfx Ab Iegw - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Data rate: 50 Hz Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone.

Condition: used, Sharpening device for block band saws MA50, in very good condition, with frequency converter (FU). Price changes, errors, and typographical mistakes reserved. Pjdpfewzzfwex Ab Iogw

Condition: new, Year of construction: 2025, Cutting Knife Model: WEIMA, GROSS, UNTHA Type: ZM40, ZMK50, GZ40, RS40, RS50 Year of manufacture: 2025 New / ready-to-use part Pgodpfx Absxn H Sao Isw 1. 1Z-115 Knife 2. 2Z-115 Knife 3. 3Z-115 Knife We are a manufacturer of replacement knives and spare parts for crushers and shredders.

Condition: ready for operation (used), Year of construction: 1979, Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement. Pgodpfx Aoxzikreb Isw

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Pgodpfx Asq Dzkueb Isw Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Container size approx.: 0.7 x 1.3 x 0.14 m Container volume approx.: 110 liters Pgjdpjxy Ibyjfx Ab Isw

Condition: excellent (used), Trumpf Type: TruPulse 44 Trumpf laser device with laser light cable and KLH cooler Laser device TruPulse 44 Electrical power at nominal laser power on the workpiece 2.0 kW Power 2.0 kVA Current at 230 V 9.0 A Consumption data Maximum power consumption (e.g. service case) Electrical power at nominal laser power on the workpiece 2.5 kW Power 2.5 kVA Current at 230 V 11.0 A Network design! Electrical connection values Mains 220 V (-10%) ... 240 V (+10%) 50 Hz (-3 Hz) ... 60 Hz (+3 Hz) at nominal power (total power factor) 0.88 Insulation resistance 400 kOhm Pre-fuse 16 A Laser device dimensions Width 485 mm Depth 800 mm Height 700 Laser device weight 1.5 kN (150 kg) distributed over 4 castors Cooler: KLH Kältetechnik UC3.K2W. MT-00-TLS Refrigerant R134 a / GWP 1430 Tank 1.80 kg Power supply 3 x 400 V Frequency 50 Hz Rated current 4.5 A Connected load 1.8 kW Dimensions Length 650 mm Depth 650 mm Height 1100 mm Psdpfx Ajv Hnz Dob Ijgw Weight 190 kg Weight: 340 kg Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2022, Suction nozzle diameter: 200 mm Nominal flow rate: 2800 m³/h Chip bag capacity: 2 x 120 l Filter cleaning: manual Motor power: 2.2 kW Pgodpfev R U H Ujx Ab Iow Dimensions: 1500 x 500 x 2100 mm (L x W x H) Weight: 53 kg

Condition: new, Year of construction: 2025, Cutting Knife Model: WEIMA, GROSS, UNTHA Type: ZM40, GZ40, RS40 Year of Manufacture: 2025 New / Ready for Use 1. 1Z-86 Blade 2. 2Z-86 Blade We are a manufacturer of replacement blades and spare parts for crushers and shredders. Pgsdpfxoxn H Stj Ab Iew

Condition: ready for operation (used), Year of construction: 1993, Offered is a Schenk/Trebel material tensile testing machine with retrofitted testing software from Doli year 1993, test material: reinforcing steel, max. tensile force 200kN, clamping tool as well as extensometer from Mess- und Feinwerkzeug GmbH MFL 300/500 with sensor and base. Viewing possible by arrangement. Podpfxoxzikle Ab Iogw

Condition: excellent (used), functionality: fully functional, DEMAG wheel hub motor 36/24 K6P with FG36 for P2000 P1600 Very good condition, complete with all accessories including control cabinet, pendant floor control panel Pgodpfowaflfox Ab Ijw TOP PRICE!! From a large spare parts warehouse, see also my other offers Info: we have over 20,000 DEMAG items in stock! Check out my other offers from our warehouse inventory as well!

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) suitable for Trumpf CS 20 and CN20 very good condition, very little used Pjdpfsu Nuycox Ab Iogw

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW Psdpfexg Hrksx Ab Iegw - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200 mm / 2 x 100 mm Nominal flow rate: 1900 m³/h Chip bag volume: 1 x 110 l Filter cleaning: manual Motor power: 1.5 kW Machine height: 1000 x 500 x 2100 mm (L x W x H) Pgsdjv N Tydopfx Ab Iow Weight: 39 kg

Condition: new, Year of construction: 2025, Scraper knife Pgjdpfxjxn I R Rj Ab Ijw Model: WEIMA, GROSS, UNTHA Type: ZM30, GZ30, RS30 Year of manufacture: 2025 New / ready for immediate use 1. 8Z-66 knife 2. 4Z-66 knife We are a manufacturer of replacement knives and spare parts for crushers and shredders.

Condition: ready for operation (used), Year of construction: 1984, Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment. Pgsdpfx Ajxzik Eeb Iew

Condition: new, Year of construction: 2025, Cutting Knife Model: WEIMA, GROSS, UNTHA Type: ZM30, GZ30, RS30 Year of Manufacture: 2025 New / Ready for Use 1. 1Z-66 Blade 2. 2Z-66 Blade Psdpfexn Ibvjx Ab Iegw We are a manufacturer of replacement blades and spare parts for crushers and shredders.

Condition: ready for operation (used), Year of construction: 1963, A LOS material tensile testing machine is offered. Test material reinforcing steel, max. tensile force approx. 120kN, last calibration 2023, inspection possible by arrangement. Pgjdpfsxzikxsx Ab Iew

Year of construction: 2016, condition: ready for operation (used), Tipping device for grid boxes and containers year 2016. Max. loads: 2000kg, own weight 860kg. Viewing is possible by arrangement. Podpfx Aexy R Eusb Ijgw