Used Feeding Device for sale (20,533)

Condition: used, Year of construction: 1986, Technical details: sheet width: 650 mm Hsdpou Icgusfx Aiysnl coil weight: ca. 2 t coil internal diameter: 350 - 570 mm electrics - voltage/frequency: 380/50 V/Hz total power requirement: ca. 1,5 kW weight of the machine ca.: 2,0 t space requirements approx. LxWxH: 1,8 x 3,0 x 1,9 m Coiler with Feeding Device - Sizes of coiler: W:1,20 x D:1,10 x H:1,60m - Roll distance: 0 - 5,5 mm - Rolls turning rate: min.:4,3 rpm, Max.:43 rpm - Rolls dia.: 100 mm - Feeding min.: 1350 mm/min, max.:13500 mm/min - Sizes of feeder: W: 1,30 x D:0,90 x H:1,90m Machine can be demonstrated under power. i.D. *

Condition: good (used), FERAG JetFeeder Hnsdetk S D Ispfx Aiyjl Feeder for feeding printed products into an inserting line

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Hnodpfx Aiex Elfceyol Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm Hsdpfx Asx Elkfoiyonl D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Hnsdpfxsy N Dvbj Aiyjl Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Hedpfx Aewav R Soiyjnl Your ad has been automatically translated. Translation errors are possible.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz Hnjdpfxjx N Ik As Aiyel - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Weight: 17 kg In good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Hnedsxrgvmepfx Aiysl Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Hnedpfx Aijxw Rdloyol Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Hedpfxoxf Urpj Aiyenl Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. Hnedpjux Shvefx Aiysl 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg Hnedpfxjxf Up Uo Aiyol WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Hnedoxf Urvepfx Aiyol Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz Hnodeuqrahepfx Aiyel - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Hnsdpfou Ailgox Aiyel Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos Hnjdpfxjxvp S Ej Aiyol -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: excellent (used), Catalogue number 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max. blade diameter for multi-blade saw: 350 mm - Blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm - From above: - Kickback fingers - Pressure roller, sliding, metal - Kickback fingers - Pressure roller, sliding - Saw shaft with blades - Pressure roller, sliding - Sliding pressure shaft, metal - From below: - Guide bar - Kickback fingers - Track - Central lubrication - Stepless feed speed adjustment - Electric lifting of saw shaft 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw movement 0.55 kW - Lasers (not working, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 2200 x 1450 x 2000 mm - Weight: 1925 kg Hsdpoy Sn Rnefx Aiysnl ADVANTAGES – Made in Germany – Shaft with floating blade for edging – Additional sleeve for multi-blade saw included – Used multi-blade saw, in very good condition Net price: 58,900 PLN Net price: 14,030 EUR (based on exchange rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2022, The Matest C313N is a laboratory freeze-thaw and climatic chamber primarily used for construction material testing—specifically for studying the behavior of concrete, cement, aggregates, and other materials under various temperature and humidity conditions.Primary purposes:Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling).Standardized durability testing of construction materials (e.g., EN 1367-1).Execution of accelerated aging and climatic tests under diverse environmental conditions. Features: ✔ Dual parameter control: temperature and humidity. ✔ Temperature range: approx. -30 °C to +70 °C. ✔ Humidity range: 20–95% (±1% accuracy within the appropriate temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments. ✔ 5″ color display: real-time clock and optional data logging via PC connection. Hnjdpfey R D D Usx Aiysl ✔ Stainless steel internal and external structure: for long service life.Applications:Freeze-thaw testing on concrete and building materials: demonstrates how materials crack or degrade due to thermal cycling.Quality control of construction materials under laboratory conditions. Environmental and climatic tests where precise control of heat and humidity is essential.

Condition: used, Step Conveyor, Feeding Conveyor, Used Machine Manufacturer: RNA Model: --- Overall Dimensions: Width: 1850 mm Depth: 1600 mm Height: 1430 mm Electrical Data: 400V Belt Size: 1050 x 560 mm Step Conveyor Size: 820 x 610 mm Hnsdpoyzmbkjfx Aiyel Conveyor Belt Size: 1580 x 70 mm (incomplete) In the condition shown in the pictures!

Condition: good (used), Manufacturer: Bühner Schaible Elektronik GmbH Hnedpfoh Dimnsx Aiysl Type: th 15 / S2 Electrical data: 230 V / 50-60 Hz / 6A Diameter: 900 mm

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm Hnedpfx Aioy R A Aceysl - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 2026, condition: new, Ready-to-deliver press feeding line for scaffolding plank production with 4 Ton decoiler, straightener feeder and 200 Ton C-type press. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. This scaffolding plank feeding line is available from stock and ready for fast delivery. The system is designed for perforating, punching and feeding operations in scaffolding plank production and similar metal forming applications. The line combines stable coil feeding, precise straightening and high-capacity press performance in a compact and efficient production solution. Ideal for companies looking for immediate production capacity without long manufacturing lead times. ⚡ FAST DELIVERY ADVANTAGE Stock machine – ready for shipment Fast delivery opportunity Reduced investment waiting time Ready for industrial production setup ⚙️ TECHNICAL CONFIGURATION Coil Width: up to 600 mm Mechanical Decoiler: 4 Ton Capacity Straightening Servo Feeder System C-Type Mechanical Press: 200 Ton Capacity Servo synchronized feeding operation Heavy-duty industrial structure 🔧 LINE COMPONENTS 4 Ton Hydraulic Decoiler Straightening Unit Servo Feeder System 200 Ton C-Type Press Hnsdpfx Ajy Nnfteiysl Electrical & Automation System Operator Control Panel ⚙️ ENGINEERING FEATURES High precision feeding performance Stable straightening and synchronized press operation Heavy-duty press structure for continuous production Servo motor controlled feeding system Compact and operator-friendly design Suitable for integration with roll forming systems ⚡ OPERATIONAL ADVANTAGES Immediate availability from stock Reliable and continuous production Reduced setup and commissioning time Flexible use for punching and perforation applications Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Scaffolding plank production Perforated metal production Sheet metal punching applications Roll forming pre-feeding systems Construction industry components

Condition: good (used), Year of construction: 1996, functionality: unexamined, turning diameter over cross slide: 700 mm, turning length: 2,000 mm, turning diameter: 700 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, For sale: 1 unit used lead- and feed-screw lathe Manufacturer: Weiler Werkzeugmaschinen Model: E70 Hjdpfsy R Dyvex Aiyjnl Year of manufacture: 1996 Technical data: Centre height: approx. 355 mm Swing over bed: approx. 700 mm Swing over cross slide: approx. 420–450 mm Distance between centres: 2000 mm Spindle bore: 106 mm Including the illustrated documentation, chip conveyor and Sauter tool holder. The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: excellent (used), functionality: fully functional, total height: 130 mm, total width: 270 mm, total length: 300 mm, type of input current: AC, input voltage: 230 V, Electronic water dosing device with temperature display Delta Model: Economic quick and precise water quantity input, user-friendly control panel with large, bright display compact, flour-dust-proof stainless steel housing Technical Data: Dosing range: 0.1 l – 99.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 20 l/min Water connection: 3/4" male thread Power supply: 100 - 240V; 50Hz Device dimensions (W x H x D): 270 x 300 x 130 mm Hjdpfx Aijy Srv Ioyonl Used unit for cold water dosing

Condition: used, Dust suction hood 160 mm Motor output 1,5 kW Dimensions (L/W/H) 1.220 x 650 x 3.270 mm Hsdpfjyi Ht Uox Aiyjnl