Used Kramer 780 for sale (81)

Condition: used, Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 160mm Integrated lift for ergonomic operation Made of stainless steel Lowest noise level Easy cleaning Rated power: 36 kW Control voltage: 24/230 V Bcjdpexmg R Tjfx Afheu Operating voltage: 400 V / 50 Hz Total nominal current: 63 A Fuse protection: 80 A

Condition: used, operating hours: 2,993 h, Equipment: all wheel drive, Kramer Wheel Loader 5065 Operating hours: 2993 Bcodox Iankopfx Afhsu kW: 34.30 Payload front: 3200 kg Payload rear: 3200 kg Year of manufacture: 2021 Fork and bucket included

Condition: like new (used), Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Bcedpspgnftjfx Afheu Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Condition: used, Grinder with mixer Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Bjdpfx Afjw Idzgshocu Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Condition: used, Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Bjdou H Af Uspfx Afhjcu Width: 110 Lenght: 90 Height: 115

Condition: like new (used), Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Bcsdpfxed S U E Re Afhou Delivery time: 10 working days after advanced payment

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Bedpefpa Ihofx Afhscu Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm • Geared brake motor • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), The KRÄMER+GREBE TMG 1500/200 mixing grinder is a professional stainless steel machine designed for industrial meat processing. It is ideal for grinding and mixing both fresh and partially frozen meat. Mixing Grinder CFS – KRÄMER+GREBE TMG 1500/200 Manufacturer: CFS – KRÄMER+GREBE Model: TMG 1500/200 Year of Manufacture: 1998 Machine Number: 371/0109 CE Certification: Yes Machine Features: Mixing tank capacity: approx. 1500 liters Processing capacity: Fresh meat: approx. 800-900 kg Partially frozen meat: approx. 700-750 kg Meat grinder throat diameter: 200 mm Main motor power for grinder: 45 kW (1 speed) Screw speed: 160/320 min⁻¹ Main motor power for mixer: 7.5/11 kW (2 speeds) Mixing paddle speed: 16/32 min⁻¹ Additional Equipment: Pneumatic sorting device Pneumatic discharge flap for mixer Stainless steel base Integrated loading for 200-liter wagons Application: This mixing grinder is ideal for meat processing plants that require efficient and reliable machinery for grinding and mixing large quantities of meat. Machine Benefits: Bcodpfx Afeumlibjhou High performance when processing both fresh and partially frozen meat. Durable stainless steel construction ensures longevity and easy maintenance. Adjustable mixing and grinding speeds allow customization of settings to meet various production needs. Integrated pneumatic systems provide smooth and efficient operation.

Condition: good (used), overall dimensions 2800x2300x1700 mm; bowl 200 ltr; 3 knives speeds 1000/1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; hydraulic loader; hydraulic unloader; 6 knives; power supply 400 V, 50 Hz; power: main motor 26/48/85 kW, Bcodehv Ruyspfx Afheu bowl motor 2,6/5,1 kW, mixing motor 3,2/4,1 kW; unloader motor 1,1 kW, hydraulic system 2,2 kW, vacuum pump Busch 250 m3, 5,5 kW.

Condition: used, overall dimensions 2900x2500x1550/2100 mm; Bedpfx Afjv Hppvohecu bowl 200 ltr; power supply 400 V,50 Hz; 2 knife speeds 1500/3000 rpm, 48/66 kW; 2 bowl speeds, 2.2/2.7 kW; 2 mixing speeds, 2.2/2.7 kW; hydraulics 3.1 kW; loader; unloader 0.37 kW.

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm Bcodpjxbtrtofx Afhsu weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Discharge diameter: 300 mm Flow rate: 5400 m³/h Bcodpfxswm Nrvj Afhsu Motor power: 2.5 kW Weight: 100 kg

Condition: used, Year of construction: 1984, Intake diameter: 160 mm Discharge diameter: 160 mm Flow rate: 2500 m³/h Motor power: 2.2 kW Weight: 50 kg Bjdswm Nr Aspfx Afhecu

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm Bsdpfxey Np Ao Afhjcu clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm clamping bar drive: 1,5 kW below cheek drive: 4 kW Bcjdpfed Rbz Tex Afhou electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm Bedpfx Aodzqaasfhocu weight 160 kg good condition

Condition: used, mileage: 2,350 km, power: 19 kW (25.83 HP), gearing type: mechanical, fuel type: diesel, color: yellow, empty load weight: 2,250 kg, number of seats: 1, first registration: 07/2019, suspension: other, operating hours: 2,350 h, Equipment: cabin, trailer coupling, Quick coupler, year of manufacture 2019, 18.5 kW, 2,350 operating hours, diesel, cab, 1 seat, 20 km/h, trailer hitch, quick coupler, bucket, pallet forks, height 1.98 m, operating weight 2,250 kg. FOR US, THE CONDITION AND FEELING OF THE MACHINE ARE CRUCIAL, PRICE IS SECONDARY. For further questions, Mr. Faller is available at the following number. //*TRADE-IN, PART EXCHANGE OR COLLATERALIZATION OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* More offers can be found on our homepage: The description and stated data do not constitute a warranty and are not binding. The only binding document is the purchase contract signed at the dealership at the time of purchase. Errors and prior sale excepted! Bcedpfowgc Rlox Afhsu

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Bodpfx Asww I Tmjfhecu

Condition: good (used), overall weight: 4,500 kg, machine/vehicle number: 311660701, Kramer 418 4WD Telescopic Motor hours: 12531 Weight: 4.9 t Standard tires: 12.5-20 Bucket capacity: 0.85 m³ Bedpfxjvq Nt Nj Afhjcu Steering method: AL Transport length: 5.05 m Transport width: 1.75 m Transport height: 2.48 m Engine manufacturer: Perkins Engine type: 704.30 Engine power: 45 kW

Condition: excellent (used), power: 34 kW (46.23 HP), fuel type: diesel, color: other, Year of construction: 2020, operating hours: 2,037 h, General information Year of manufacture: 2020 Technical information Engine capacity: 2.190 cc Chassis type: rigid Make of engine: Yanmar Empty weight: 4.500 kg Dimensions (LxBxH): 495 x 165 x 239 cm Functional Quick coupler system: Yes CE mark: yes Bsdpfx Afsxtt Irehjcu Condition Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Germany Condition CE type: CE Bucket & Forks, Hydr. quickhitch, 4 wheel steering

Condition: excellent (used), power: 34 kW (46.23 HP), fuel type: diesel, color: other, Year of construction: 2021, operating hours: 1,799 h, General information Year of manufacture: 2021 Technical information Engine capacity: 2.190 cc Chassis type: rigid Steering: articulated Make of engine: Yanmar Empty weight: 4.500 kg Dimensions (LxBxH): 495 x 165 x 239 cm Functional Quick coupler system: Yes Bjdpjxtt Ilefx Afhscu CE mark: yes Condition Technical condition: very good Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Germany Condition CE type: CE Bucket & Forks, Hydr. quickhitch, 4 wheel steering

Year of construction: 2010, condition: excellent (used), Filter Sprayer KRAMER Gmbh Year : 2010 Bjdpfxoh D E Rds Afhocu 70 000 m3/h in total The system can be used separately in 2 filters of 33 000 m3/h each.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Bjdoxl Elgopfx Afhscu

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. Bsdpfoxcpd Usx Afhocu The machine is powered and can be tested. Please contact us to arrange a viewing.

Condition: used, Year of construction: 1991, functionality: fully functional, 2 pcs. Carton erector, folder and glue machine with Norton glue system. Both machines are in working condition but well used. Bjdpfx Aewumv Usfhscu