Used Labelling for sale (1,487)

Condition: used, Year of construction: 2009, Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data - Year of manufacture: 2009 - Design: low-level infeed palletizer - Changeover: automatic, for different pallet patterns and pallet sizes - Output range: low to medium production capacities - Handled at the site: shrink-wrapped PET bottle packs - Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station Nledpfxsz Dxtxo Airjh - Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery - GEA Procomac Opera palletizer - Complete pallet conveyor system - Pallet magazine - Mother pallet station - Robopac stretch wrapping machine - Logopak pallet labelling system Condition Still installed and under power, in production until October 2026. Inspection under power by appointment. Availability From 1 October 2026. Location: Germany.

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors Nljdjz Dv Uyspfx Airjh - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Njdpfx Aoz Ep A Hoirslh Electrically tested, heated through, and measured

Condition: used, Machine: Mecamarc Optimeca rec 2962 C5 12 Mecamarc Optimeca Technical data: working direction: left-right, linear capacity bph max.: 3000 labels: self adhesive labels number of labelling stations: 2 Nedpfx Aiez N S Smerelh speed adjusment: frequence converter

Condition: used, mileage: 1,80,000 km, power: 213 kW (289.60 HP), first registration: 03/2020, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Well-maintained MAN 15-ton flatbed truck with a canopy, with only 180,000 km and 290 hp, featuring a 7.20 m long flatbed and sliding tarpaulin on both sides, Palfinger MBB C 1500 S tail lift, 8.18 tons payload, automatic transmission, automatic climate control, air suspension on the rear axle, trailer coupling, navigation system, reversing camera, cruise control, and more. TGM C short cab Wheelbase 5,125 mm Payload 7,680 kg at 15,000 kg permissible total weight Payload 8,180 kg at 15,500 kg technically permissible total weight Euro 6 D engine with 290 hp and 1150 Nm Drive 4 x 2 Flatbed dimensions (internal): approx. length 7.20 m x width 2.48 m x height 2.55 m Sliding tarpaulin on the right and left sides Palfinger MBB C 1500 S tail lift, lifting capacity 1,500 kg according to the manufacturer Tail lift dimensions: approx. 2.55 m long x 1.80 m wide MAN TipMatic 12 12 OD automatic transmission Front axle with leaf springs, rear axle with air suspension Front axle VOK-06, rear axle Hypoid HY-1130 Front springs, parabolic 5.6 tons, rear springs, air 11 tons Front axle load 5.6 tons, rear axle load 10.6 tons HY axle ratio i = 3.70 Stabilizer for front and rear axles Automatic climate control MAN Brake Matic Controlled rocker arm brake (EVBec) Disc brakes on front and rear axles ABS, ASR, and ESP MAN EasyStart Emergency Brake Assist 2 (EBA 2) Lane-Guard-System IV (LGS IV) Trailer coupling, ROCKINGER 400G 150A with air pressure connections Permissible gross vehicle weight 33,000 kg Trailer load with continuous braking system 19,853 kg Trailer load with SDAH/ZANH 16,000 kg Reversing camera MAN Media Package Navigation Cruise control Daytime running lights Engine brake Multi-function steering wheel 300-liter tank Plastic toolbox, exterior, rear right Toolbox in the cab, center Electrically adjustable and heated exterior mirrors Nlodpfx Aozmltgoirjh Electric windows Driver comfort seat, air-suspended with lumbar support, shoulder adjustment, and heating Seat covers in comfort quality MAN Media Truck Advanced 12 V radio with 7" color display Hands-free system "Comfort" for 2 mobile phones (MFL and Bluetooth® compatible) MAN sound system Very good and well-maintained condition German vehicle from 1st owner Tarpaulin is labeled Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2610

Condition: used, Year of construction: 2012, Used machine Nesting cell Year of construction: 2012 Gantry machine in Gnatry design Working area in X = 4300 mm Working area in Y = 2250 mm Working area in Z = 125 mm Travel speed X - Y - Z-axis 100 - 100 - 20 m/min with grid table and sacrificial plate with 3 vacuum pumps, each with 300 m³/h (one of them from 2026) Spindle motor 12 kW with torque support and C-axis with Homag Flex 5 tool interface Tool clamping system HSK-F 63 Tool changer with 14 tool positions Loading with vacuum lifter and roller conveyor Nlsdpez Rrbqefx Aireh Unloading with conveyor belt with manual label printer Safety device: stepping mat Caution! Drilling head is defective! Availability: approximately July 2027 Location: North Rhine-Westphalia

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Nsdpfezgw Ebex Airslh Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: used, Year of construction: 1995, Overview This bottle washer-dryer was built in 1995 by the French manufacturer STONE. It cleaned and dried the outside of filled glass bottles ahead of labelling in a wine bottling line with an output of 6,000 bottles per hour, running 375 ml, 750 ml and 1 L formats. The machine combines a rotary washing module (LB20) with vertical rotating brushes and a 3 m air drying tunnel (S20), linked by the bottle conveyor. It is still installed and under power and can be visited on request. Technical data - Manufacturer: STONE - Model: LB20 S20 - Year of manufacture: 1995 - Machine type: bottle washer-dryer (external washing and drying) - Output: 6,000 bottles per hour - Containers: glass bottles - Formats: 375 ml, 750 ml, 1 L - Washing module length: approx. 1,250 mm - Drying tunnel length: approx. 3,000 mm - Overall length incl. conveyors: approx. 7,050 mm, width approx. 1,528 mm - Electrical power: 2 kW - Compressed air: 6 bar (15 NL per cycle) Equipment - Rotary washing module: star wheel carousel with vertical rotating brushes for neck, body and base - Air drying tunnel with blower-fed air ducts along the bottle path - Infeed and outfeed conveyors with infeed star wheel Nledpfx Aoz Rnc Rsirjh - Set of format star wheels - Stainless steel frame with transparent guard doors - Control panel with emergency stop and separate electrical cabinet with frequency inverter - Layout drawing available Condition Still installed and under power. An inspection on site is possible on request. Dismantling and loading are not included. Availability Available immediately. Location: France.

Condition: used, mileage: 79,980 km, power: 100 kW (135.96 HP), first registration: 11/2021, fuel type: diesel, empty load weight: 2,184 kg, maximum load weight: 941 kg, overall weight: 3,200 kg, wheelbase: 3,430 mm, next inspection (TÜV): 10/2028, fuel: diesel, energy efficiency: A, CO₂ emissions: 164 g/km, fuel consumption (urban): 6.9 l/100km, fuel consumption (extra-urban): 5.8 l/100km, fuel consumption (combined): 6.2 l/100km, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 8, total length: 5,370 mm, total width: 2,250 mm, total height: 1,890 mm, Year of construction: 2021, maximum speed: 183 km/h, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, Exterior * Heated and electrically adjustable exterior mirrors * Halogen fog lights * Mounting points in the roof frame * Tires 225/55 R17 * Full wheel covers * Spare wheel with jack Interior * Adjustable passenger seat * Comfortable driver's seat * Lumbar support for driver's seat * Lockable glove compartment Safety * Adaptive brake light * Thorax-pelvis side airbag for driver * Window bags for driver and passenger * Passenger airbag Nodpfxs Aa A Sko Airjlh * Thorax-pelvis side airbag for passenger Comfort and Environment * Rearview camera * Rear doors, double-wing, opening to the side * Attention Assist * Hill-start assist * ECO Start-Stop function * Headlight assistant * Lane package * Lane keeping assist * Blind spot assist * Parktronic * Warm air channel to the passenger compartment * Auxiliary heater, electric * Mercedes-Benz emergency call system * Leather steering wheel * Multifunction steering wheel with trip computer * Cruise control * Rain sensor * BlueEFFICIENCY package * Comfort suspension Multimedia * Live Traffic Information * Instrument cluster (pixel matrix display) * Digital radio (DAB) with Bluetooth hands-free system Equipment lines and packages * Aerodynamics package * Parking package Condition/Documents * COC documents Other * 2-way speakers in the front * 9G-TRONIC automatic transmission * Active locking mechanism for sliding door * Acoustic package * Towing capacity up to 3,000 KG possible * Audio 40 * Digital extra: Remote Services Plus * Electrical system for trailer socket * Emission class Euro 6d-TEMP * Fixed windows in the rear * Window in tailgate with wiper and washer system * Window on the right, fixed in the side wall/sliding door * Window in the front left, fixed in the side wall/sliding door * Generator 14 V / 250 A * Speed limiter 210 km/h * Weight variant 3,200 kg * Seat belt warning system for passenger * Semi-automatic TEMPMATIC climate control system * Grab handle for entry * Grab handle in the rear * Grab handles for entry for driver and passenger * HOLD function * Interior light(s) in the rear * Interior mirror * Interior trim, enhanced design * Child lock on doors in the passenger compartment * Connection strip for electrical connection * Communication module (LTE) for digital services * Plastic floor TPO in the passenger compartment * Steering wheel adjustable in inclination and height * Model update * OM 654 DE 20 LA 100 kW (136 hp) 3800/min * Wheelbase 3430 mm, long overhang * Tire pressure monitoring on front and rear axle, wireless * Labels/Printed material in German * Rear seat configuration with quick-release mechanism, 2 seat rows * Seat heating for driver * steel blue * Fabric Caluma black * Tourer PRO * First aid kit * Fleece battery 12 V 92 Ah * Front seats with EASY-ENTRY function * Warning triangle * Warning light for windshield washer fluid level Other: * Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT). * For all vans: Optional 12 or 24 months Mercedes-Benz used car warranty available. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you. * No liability for printing and typographical errors. * Errors and prior sale reserved.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular operation until recently. Before the sale, a test run was performed: the fan starts reliably and runs smoothly for its age. The commissioning was documented on video; the video can be sent to serious potential buyers upon request. The scope of delivery also includes the existing control cabinet of the extraction system, including the fan control. The control cabinet is complete. The labeling indicates that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Technical data - fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Nedpjz Ikxzefx Airslh Motor no.: 25787 Power: 11.0 kW / 15 hp Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 rpm Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: extraction system Year of manufacture of control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse rating: 35 A Control voltage: 230 V Wiring diagram no.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by arrangement. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at his expense. Terms of sale Sale from the location. Sale in the existing used condition, as inspected. No guarantee or warranty, to the extent permitted by law. Technical data provided to the best of our knowledge; errors and prior sale reserved. On-site inspection is possible and recommended by appointment. Selling price: 1,500.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: like new (used), functionality: fully functional, number of ink cartridges: 4, color channels: 4, number of print heads: 5, resolution (max.): 1,200 dpi, number of feeding trays: 1, total length: 6,000 mm, total width: 2,255 mm, total height: 1,600 mm, space requirement length: 10,000 mm, space requirement width: 5,255 mm, type of input current: AC, input current: 32 A, input voltage: 400 V, Equipment: documentation/manual, raster image processor, Konica Minolta PKG-1300 – single-pass inkjet printer for corrugated board (demo unit) Demo unit, fully functional, used only for testing. Price includes a new set of 5 printheads (boxed, unused). Videos of the machine in operation available on request. The machine can be inspected and tested in person. The Konica Minolta PKG-1300 (manufactured by MTEX NS as NS Multi 1300) is an industrial single-pass digital packaging printer offering high print quality, automated feeding and stacking, and efficient production of short and personalized runs. It prints on flat and pre-die-cut corrugated boards as well as folding carton. It is ideal for printing houses, packaging manufacturers and companies looking for a flexible solution for printing on cardboard. Applications: shipping boxes, e-commerce and food delivery boxes, gift and custom boxes, promotional and display packaging, prototypes, short and personalized runs for e-commerce, FMCG and private labels. Benefits: on-demand printing, packaging personalization, fast turnaround of short runs, reduced prepress and production costs. Printer: Technology: single-pass inkjet, 5 HP PageWide printheads, water-based CMYK pigment inks (5-litre tanks) Resolution: 1200 × 1200 dpi; 600 × 1200 dpi; 300 × 1200 dpi; drop size 5 pL Print speed: 9 m/min (high resolution), 18 m/min (medium), 27 m/min (low) Max. imaging width: 1070 mm Media: flat and pre-die-cut corrugated boards, 1–50 mm thick Media size: min. 300 × 400 mm, max. 1300 × 1600 mm (W × L) Dimensions (H × W × D): 1600 × 2255 × 1250 mm, weight 1200 kg Automatic feeder Nsdpfx Aisz R S Acerjlh Feeding speed up to 27 m/min, max. feed stack height 400 mm Dimensions (H × W × D): 1360 × 2255 × 1600 mm, weight 750 kg Exit table with hot-air dryer Dimensions (H × W × D): 950 × 2255 × 600 mm, weight 300 kg Automatic stacker: Stacking speed up to 27 m/min, max. stack height 700 mm Dimensions (H × W × D): 1310 × 2255 × 1990 mm, weight 1150 kg Key features: Head cleaning with individual selection of printheads and colour channels Multiple media sensors across the width for flexible media placement 5-belt vacuum transport with individually switchable air flow and adjustable suction Printhead protection roll against media impacts Ionizing media cleaning system to reduce dust and extend printhead life Power and utilities: Single power connection for the complete system: 400 V, 3-phase, 50 Hz, 32 A Power consumption: printer 8000 W, web cleaner 5500 W, feeder 3500 W, stacker 3500 W Feeder and stacker each require RCCB 4P, 40 A, 300 mA, C, 10 kA (customer side) Compressed air: 6 bar, 50 l/min, 8 mm OD hose (customer side) Software: PC/Windows (PC included), PKG-1300 user interface, Ergosoft RIP. Internet connection required 24/7. Operating environment: 20–30 °C, 50–70% RH (non-condensing). Footprint: approx. 2200 × 6000 mm (W × L) plus vacuum cabinet. Recommended clearance: 2000 mm front, back and left side, 1000 mm right side. Delivery: shipped on original pallets. Assistance in arranging transport is available. A forklift is required for unloading. Terms: wholesale offer, sold without warranty. Price negotiable.

Condition: used, mileage: 56,323 km, power: 100 kW (135.96 HP), first registration: 10/2021, fuel type: diesel, overall weight: 2,800 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,895 mm, total width: 2,244 mm, total height: 1,910 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number: 263431 1st owner, service booklet maintained, non-smoking vehicle Nljdj Aau Auopfx Aireh ---- HIGHLIGHTS & PACKAGES * 2-way front speakers * BlueEFFICIENCY package ASSISTANCE SYSTEMS * Mercedes-Benz emergency call system * Breakdown assistance * Rain sensor * ATTENTION ASSIST * Driving light assistant * ECO start/stop function * TEMPOMAT (cruise control) ENGINE, GEARBOX & CHASSIS * Basic chassis * 6-speed manual gearbox FSG 350 AUDIO & COMMUNICATION * Digital radio (DAB) * Audio 30 * Communication module (LTE) for digital services INTERIOR * Multifunction steering wheel with trip computer * Solid partition with 1 window * Interior mirror * Lockable glove compartment * Semi-automatic climate control system TEMPMATIC * Climate zone 1 (cold/comfort) * Instrument cluster with pixel matrix display * LED light strip in the cargo area * Driver's seat * Adjustable passenger seat * Airbag, passenger side * Fabric Caluma, black * Floor covering, plastic * Attachment points in the roof frame * Interior panelling, cargo area, side LIGHTS & VISIBILITY * Adaptive brake light * LED Intelligent Light System WHEELS * Premium tire protection (3 years) TECHNOLOGY & SAFETY * Hill-start assist * Multi-button remote control * Seatbelt warning for passenger seat * Pedestrian protection EXTERIOR * Heated and electrically adjustable exterior mirrors * Heat-insulating glass all around * Rear door, two-leaf, 180 degrees, without window * Steel blue OTHER EQUIPMENT * Buffer battery for starting * Fleece battery 12 V 92 Ah * Model series C447 Vito/V-Class * Basic * Wheelbase 3200 mm, short overhang * Service interval 40,000 km * Main tank 57 liters * Exhaust gas purification SCR generation 3 * Europe * Generator 14 V / 185 A * Generator management * Emission standard Euro 6d-TEMP N1 * Manufacturer Mercedes-Benz AG * Model year G1-I * Model revision * Labels / printed material in German * Control code, changeover to WLTP * Fire extinguisher 1 kg * BASE * Sales designation 0 * Panel van * Control code, factory 157 * Mercedes-Benz MobiloVan with roadside assistance and extended warranty Further features * CO2-optimized brake system * Radio generation 2 * 3-month rule market * Wheel size group 1 * Airbag control unit generation AB12 * Window in tailgate with wiper and washer system * Control code, development * Digital extra: Remote Services Plus ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of the purchase contract. You will receive the exact scope of equipment from our sales team. Please contact us.

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Nljdpfxoz I Dzio Airjh Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ab0307002198, Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of manufacture: 2007 | Location: 41564 Kaarst-Holzbüttgen Delivery and collection possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust, and flexible bag packaging machine with an integrated thermal transfer printer. Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal transfer printer PI-412c) • FUNNEL SIZE A12 • BD100 (Orange Loop / Bag De-aerator) Also included in the scope of delivery: 1 box with 13 film rolls (Autobag chain bags) Njdpfoz Spqxjx Airjlh Mode of operation (manufacturer's description): The AB 180 OneStep feeds an Autobag chain bag unwound from a roll through the printer, opens it by means of compressed air, and prepares it for filling. The products are placed manually or via feeding systems into the bag. Subsequently, the bag is sealed using a foot switch or automatically. The integrated thermal transfer printer eliminates the need for offline labeling – printing and packaging are carried out in one step (“Print-n-Pack” / Next-Bag-Out technology). Ideal for fulfillment, mail order, spare parts, small and medium-sized series with frequent product changes. Technical data (according to the product data sheet): • Weight: 142 kg • Dimensions: approx. L 1,700 × W 850 × H 1,150 mm • Electrical: 110/220 V, 50/60 Hz switchable • Compressed air: 150 l/min at 5.5 bar (dry, clean air) • Passage: up to 108 mm • Bag thickness: 35–100 µm • Bag sizes: width 50–270 mm | length 140–630 mm • Performance: up to approx. 30 bags/minute (with printing) We will gladly send you the product data sheet and other documents upon request. If you are interested, I look forward to hearing from you – I will be happy to prepare an individual offer for you, including shipping costs.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, overall weight: 1,500 kg, controller model: Easy Control EC 10+, The machine has been completely overhauled! TECHNICAL DETAILS Edge material, strip: 0.4–6 mm Edge material, roll: 3 mm Workpiece thickness: 8–60 mm Workpiece width at workpiece thickness 8–22 mm: min. 70 mm Feed rate: 11 m/min Tool set Radius: 2 mm Joint milling unit Motor power: 2 × 2.2 kW Frequency: 200 Hz Cutting unit Motor power: 2 × 0.18 kW Milling unit Motor power: 2 × 0.27 kW Profile milling unit Motor power: 1 × 0.35 kW Design: WD 60 Working height: 950 mm MACHINE DETAILS Connected power: 9.8 kW Nodpfjz Iru Dex Airolh Dust extraction connection: 1 × 120 mm / 3 × 80 mm / 1 × 100 mm Power supply: 400 V / 3 phase / 50 Hz Pneumatic pressure: 6 bar Dimensions & Weight Dimensions (L x W x H): 4,773 x 1,525 × 2,182 mm Weight: 1,500 kg EQUIPMENT Electronic control system Easy Control EC 10+ Automatic edge feeding Tool set R = 2 mm Joint milling unit Gluing unit A6 Pneumatic 2-point adjustment of the pressure zone Cutting unit for chamfer and straight processing Pneumatic adjustment of the cutting unit for chamfer and straight processing Milling unit, counter-rotating Pneumatic adjustment of the milling unit for chamfer, radius, and straight processing Profile milling unit WD 60 Scraper blade with quick-change heads Pneumatic adjustment of the scraper blade Glue joint scraper blade Smoothing unit with 2 motors Control texts in German and English Operating manuals for commissioning, operation, and maintenance in English on DIN-A4 paper and CD-ROM Operating manuals for commissioning, operation, and maintenance in German on a USB stick Spare parts labels in German and English New tools included

Condition: good (used), machine/vehicle number: 10F5C1B-2A0A, The KEB COMBIVERT F5 frequency inverter is designed for controlling electric motors in industrial applications. The device belongs to the universal F5 series, widely used in machinery and production lines requiring precise speed and torque control. The F5 series is commonly used in industrial automation and supports both asynchronous motors and synchronous servo drives. It features a modular design, high configuration flexibility, and the ability to operate in demanding industrial environments. - Model: 10F5C1B-2A0A - Series: COMBIVERT F5 (Compact version) - Serial number: 301211195 - Production date: 2010-05 - Country of origin: Germany Nlodpfx Aeyzpzgoirjh Input (Supply): - 1-phase / 3-phase: 200–230 V AC - Frequency: 50/60 Hz - Input current: 20/14 A (at 230 V) - UL rating: up to 240 V / 20 A Output (Motor): - 3-phase AC output - Output current: up to 10 A - UL rating: 9.6 A - Frequency range: 0–800 Hz Power: - Apparent power: 4.0 kVA - Motor rating: 2.2 kW (2/4 pole motors) The F5 inverter offers: - precise speed and torque control - scalar (U/f) and vector control modes - encoder and sensorless operation capability - integrated functions: * DC braking * PID controller * parameter management (up to 8 parameter sets) * motor protection functions - support for industrial communication interfaces (e.g., Modbus, Profibus, EtherCAT – depending on version) Construction and Visible Components: - control panel with START / STOP / ENTER / FUNC keys - communication port (RJ45, e.g., for operator panel or diagnostics) - connectors labeled X6B, X6C, X6D (communication or I/O interfaces) - terminal strip for control signals and power connections - compact enclosure for installation in a control cabinet (housing size “B”) This type of inverter is used in: - CNC machines and woodworking machinery - production and conveyor lines - pumps and fans - applications requiring variable speed motor control Due to the wide output frequency range (up to 800 Hz), it is also suitable for high-speed drive applications.

Condition: excellent (used), ///// PRICE INDICATED IS FOR 1 UNIT ///// Manufacturer: ALGRA Type / designations: D3A030012 D3A030011/6-3 23-1151-012 I offer ALGRA drive gearboxes used in metalworking machine tools. These components serve the function of power transmission and feed rate adjustment, and are most commonly used in: conventional milling machines machining centers industrial machines as drive modules Nljdpfsz Smp Tsx Airoh Robust, heavy-duty construction – typical components for continuous operation in industry. ⚙️ Technical condition Condition: used Shows normal signs of use Mechanically complete Knobs and mechanisms are functional Possible signs of storage 📦 Included ALGRA gearbox (exactly as shown in the pictures) 📏 Application drive for axis feed (X/Y/Z) drive systems for machine tools spare parts for milling machines and industrial machines maintenance / servicing of machines ℹ️ Additional information Markings stamped on the housings (visible in the pictures) Inspection labels "QS-IN PRÜFUNG" Oil-lubricated construction (closed gearbox) Individual sale possible 🚚 Shipping Shipping by courier or on a pallet Personal collection possible

Condition: used, mileage: 42,528 km, power: 75 kW (101.97 HP), first registration: 11/2022, fuel type: diesel, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, XZ1 Model Generation 1, V85 Smokers' package, W65 Tailgate, E07 Hill Start Assist, LA2 Light Assist, EZ8 Parktronic, MJ8 ECO Start-Stop Function, CL4 Multifunction Steering Wheel with Trip Computer, JK3 Instrument Cluster (Pixel Matrix Display), MS1 Cruise Control, F68 Heated and Electrically Adjustable Exterior Mirrors, V30 Side Interior Trim Cargo Area, L16 Halogen Fog Lights, MX0 BlueEFFICIENCY Package, EN6 Audio 10, SA6 Passenger Airbag, E1D Digital Radio (DAB), S04 Adjustable Passenger Seat, SB1 Comfort Driver's Seat, SE5 Lumbar Support Driver's Seat, VV9 Roof Frame Tie-Downs, D50 Full Divider, IL5 Left Hand Drive, RG1 205/65 R16 Tires, RM1 M+S Tires, RR6 Spare Wheel with Jack, RS3 Steel Wheels 6.5 J x 16, F66 Lockable Glove Compartment, H20 Heat-Insulating Glass All Around, LE1 Adaptive Brake Lights, BA3 Active Brake Assist, JW8 Attention Assist, C70 Pedestrian Protection, EY5 Mercedes-Benz Emergency Call System, EL8 2-Way Speakers Front, GE1 6-Speed Manual Transmission TSG 380, KP7 SCR Generation 4 Emissions Control, CF0 Standard Suspension, IB6 Series C447 Vito/V-Class, BB7 CO2-Optimized Brake System, EW6 Digital Extra: Remote Services Plus, E57 Trailer Socket Pre-Wiring, MT6 Emission Class Euro 6d N1, M72 HVO Compatible Vehicle, M60 Alternator 14 V / 250 A, MG9 Generator Management, MK8 Speed Limiter 210 km/h, XG6 2,800 kg Weight Variant, J55 Passenger Seat Belt Warning System, HH9 TEMPMATIC Semi-Automatic Air Conditioning, KB5 Main Fuel Tank 70 Liters, A1O Rear Axle Shaft Brand IFA, V43 Wooden Floor, ZM0 Panel Van, HI1 Climate Zone 1 (Cold/Comfort), LC4 Comfort Roof Control Unit, JH3 Communications Module (LTE) for Digital Services, IK0 Complete Vehicle, LC2 LED Light Strip in Cargo Area, CL1 Height and Reach Adjustable Steering Wheel, XO9 Mercedes-Benz MobiloVan with DSB and GgD, FF1 Center Console with Storage Compartment, XM0 Model Update, FY7 Multi-Button Remote Control, MU0 OM 654 DE 20 LA 75 kW (102 HP) 3800 rpm, EY6 Breakdown Management, Z3R Premium Tire Protection (3 Years), Z3K Pro, E34 Buffer Battery for Starting Process, IN2 Wheelbase 3200 mm, Long Rear Overhang, IL4 Region EU/EFTA, M3E Electric Suction Fan Power Level 5, XU1 Signs / Documentation German, VV0 Weld Nuts in Side Panel for Conversions Njdpfxjxfwfre Airelh Notice Despite careful review of all our price listings, errors may still occur. Sometimes these are caused by transmission errors in the systems of various platform providers. But mistakes on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Price labeling also cannot be considered a part of the contract. If you attach particular importance to a specific feature in our listing, please let us know at the time of contract conclusion. We thank you for your understanding!

Condition: used, mileage: 1,24,100 km, power: 88 kW (119.65 HP), first registration: 11/2021, fuel type: electric, empty load weight: 2,365 kg, maximum load weight: 1,135 kg, overall weight: 3,500 kg, tire size: 215/75R16, wheelbase: 3,450 mm, fuel: electricity, energy efficiency: A, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,420 mm, total width: 2,050 mm, total height: 2,580 mm, loading space length: 5,413 mm, loading space width: 2,050 mm, loading space height: 2,579 mm, Year of construction: 2021, front tire size: 215/75R16, rear tire size: 215/75R16, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, traction control, Driving assistance system: Hill start assist, Electronic parking aid, Automatic air conditioning, LED daytime running lights, Electr. adjustable and heatable, Brake assist, Electric front windows, Front fog lights, Adjustable steering column (steering wheel), Central locking with remote control, Wheelbase 3450 mm, Electronic immobilizer, Traction control system (ASR), Airbag on passenger side, Electronic stability program (ESP), Seats in cab: Double passenger seat, Seats in cab: Height-adjustable driver's seat, Speed limiter system, Tire repair kit, Tire pressure monitoring system, 6x16 steel rims, Adjustable head restraints, Driver's side airbag, Drive type: Front-wheel drive, Equipment package: Mopar Connect, E - Ducato package, Electric motor 90 kW (cont. 58 kW), Driving assistance system: Adaptive load control (LAC), Driving assistance system: Lane departure warning incl. Traffic sign recognition, Driving assistance system: Blind spot assistant, Color display above dashboard (charging indicator, E - Ducato), Transmission for electric vehicle, Rear wing doors (opening angle 260 / 270 degrees), Rear axle reinforced (suspension), HV battery 47 kWh, Infotainment system: Touchscreen, Navigation, DAB, Apple CarPlay and Android Auto, Body/bodywork: Box high compartment, charging cable with type 2 plug for high-voltage battery (mode 3), removable load compartment partition (without window), LED lighting load compartment, steering wheel and gear/selector lever handle in leather, reversing alarm acoustic (warning signal outside), headlight surround black, side protection strips, seats in cab: Driver's seat with armrest and lumbar support, Sun visor on the right with wide-angle mirror, Tele camera to the rear, Touchscreen color display (7 inch), USB port, Lightly tinted glazing, Lashing eyes load compartment floor (2) Note Njdpfx Ajvikqasirolh Despite careful checking of all our prices, errors can still creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! - .

Condition: excellent (used), The original German Hang Piccolo binding machine is designed for punching holes and attaching metal eyelets to paper, cardboard, and other materials used in binding. The device features a convenient foot-operated drive, allowing for quick and precise operation while keeping the operator's hands free to position the material. Technical specifications: Nlsdpfx Aiez Sm Szjrsh * Manufacturer: Hang * Model: Piccolo * Type: binding press / eyeleting machine * Drive: foot-operated (pedal) * Cast iron construction * Work table included * Made in Germany Applications: * Eyeleting documents, * folders and binders, * calendars, * hang tags, * labels, * promotional materials, * binding operations. Condition: Used machine, in good visual condition. Condition as shown in the photos.

Condition: excellent (used), For sale: BECKER vacuum pump, type 80/4-90. This unit comes from an industrial application and is in good used condition. The pump is equipped with a power cable and a CEE plug. Nljdpfsz Spa Aex Airsh Technical data from the nameplate: Manufacturer: BECKER Type: 80/4-90 Year of manufacture: 2004 Motor: three-phase (3~) Motor number: 6603410 Power at 50 Hz: 0.75 kW Rotational speed: 1420 rpm Current: 4.5 / 2.6 A Voltage: 175–254 V Δ / 300–440 V Y Frequency: 50 Hz cos φ: 0.70 Protection class: IP55 Operating mode: S1 Power at 60 Hz: 0.90 kW Speed at 60 Hz: 1720 rpm CE marking Standard: EN 60034 According to the service label, the manufacturer recommends an inspection every 5000 operating hours. The pump has normal signs of use. The visual condition and the scope of delivery are clearly shown in the photos.

Condition: used, mileage: 4,49,000 km, power: 220 kW (299.12 HP), first registration: 06/2018, fuel type: diesel, number of seats: 39, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), Our internal vehicle number: 1101 Mercedes-Benz Citaro C2 Power output: 220 kW Emission standard: Euro 6C Type: City bus Vehicle class: M3 First registration: 06/2018 Mileage: Original. * ZF automatic transmission D/N/R * 39+1 seats * 65 standing places * LAWO destination display front/side/rear/side with control unit * Electric sunblind * Air conditioning * Radio * Camera system / video surveillance * Folding ramp * Large multi-purpose area – for wheelchair or stroller * Convector heating * Double glazing * 2 folding windows installed * Original mileage * Vehicle is decal-labeled – film-coated * Vehicle is sold without passenger information screen (LAWO Slave 18.5") and ProSys box * Ex works price Note: Vehicle is registered – mileage and condition may vary Nlodpfoxb Iimsx Aireh Customer is responsible for independently inspecting the condition and equipment of goods/vehicle! All information is provided without guarantee Subject to prior sale See our general terms and conditions (AGB)

Condition: used, Year of construction: 1999, machine/vehicle number: LC693, Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve control is fitted to the three-channel KRONES Variojet rinser, while motorized height adjustment is provided on the filler upper section and on both capping stations. The labeling machine incorporates a horizontal, single-line laser dater for in-line coding.The Prontomatic labeling machine has a full protective enclosure and a lift-up monoblock design, supporting protected operation and access during routine line activities.Production Line Integration CapabilitiesDesigned as a complete used bottling line, this KRONES configuration integrates bottle rinsing, filling, screw capping, snap-on capping and multi-position labeling. Standard feeding, right-angle labeler infeed and transfer-screw container handling support continuous bottle movement through the labeling section. The line is suitable for industrial packaging applications involving syrup and vinegar products in glass and PET containers.Machine typeManufacturer / modelYearRinsing MachineKRONES Variojet 2.520-070-1131999Filling MachineKRONES Sensometic VP-G 050-113/SV 10/SOV 10-S1999Capping MachineAlcoa PP 10 / 360Capping MachineAlcoa K 10 / 360Labeling MachineKRONES Prontomatic 720-12-6-4-1801999PrinterLaser daterMachine Condition & Maintenance HistoryThe line is availa... Nljdpfj Adtqxsx Airjh

Year of construction: 2006, condition: used, machine/vehicle number: AT99, Used Vitone V5 decanter for oil - 90ql MalaxeTechnical Specifications & Performance DataThis second hand decanter centrifuge is an industrial separation unit designed to support upstream processing prior to packaging and bottling operations. Built in 2006, it combines robust performance with straightforward integration to modern process lines. The machine is supplied complete with an electrical control panel and a large-capacity malaxer, enabling efficient preparation and clarification of product before transfer to storage tanks and downstream filling equipment in a used bottling line or new installation.Year of manufacture: 2006Throughput capacity: 50 q/h (approximately 5.0 t/h)Included components: Electrical control panel; malaxer rated at 90 ql (about 9,000 kg)Process type: Continuous solid–liquid separation via horizontal decanter centrifugationOperating configuration: Supplied dismantled for rapid transport and reinstallationApplication: Pre-clarification and separation prior to storage, transfer, and filling in beverage production and industrial packaging workflowsAdvanced Automation & Control SystemsThe unit is delivered complete with an electrical panel that provides centralized control for start/stop sequences, motor protection, and process interlocks. The panel architecture supports safe operation, facilitating integration with plant-level controls, tank level management, and downstream fillers. Clear labeling and organized wiring simplify commissioning and maintenance, while standard protections help safeguard operators and equipment during routine use.Production Line Integration CapabilitiesEngineered for straightforward line connectivity, the decanter centrifuge interfaces easily with upstream feed systems and downstream buffer tanks or clarifiers. Its continuous discharge design helps stabilize flows to filling and packaging equipment, improving overall line efficiency. It can operate as a standalone separation module or be incorporated inline with CIP-ready manifolds, transfer pumps, and automated valves. Flow and residence time can be tuned via feed rate adjustments to accommodate a range of viscosity profiles and solids loads encountered in beverage production and related industrial packaging processes.Machine Condition & Maintenance HistoryThe machine is already dismantled, allowing efficient loading, transport, and rapid placement at the installation site. Mechanical and electrical subsystems are organized for reassembly, with the supplied electrical panel simplifying recommissioning. Overall, it represents a reliable second hand asset ready to be integrated into an existing used bottling line or a new process area following standard installation and start-up procedures.Operational Performance & VersatilityThis decanter centrifuge is designed to deliver stable separation performance across continuous operation, supporting clarification targets that improve downstream filtration and filling quality. The included malaxer enhances upstream mixing and conditioning, optimizing separation efficiency and throughput. Its robust industrial design suits extended duty cycles, while continuous solids dischar... Nleds Adt Dxjpfx Aireh

Condition: used, Year of construction: 2020, machine/vehicle number: INC36, Used Apsol case packer - year 2020Technical Specifications & Performance DataThis Apsol Case Packer is a robust secondary packaging solution engineered ( including former, inserter, and sealer) for continuous-duty industrial packaging and beverage production environments. Built in 2020, it combines reliability with efficient throughput for used bottling line upgrades and second hand packaging machinery projects. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolMachine type: Automatic Case PackerYear of construction: 2020Production capacity: 7–9 boxes per minuteRated voltage: 400 V ACFrequency: 50 HzPower: 26.5 kWFull load current: 49 AElectrical phases: 3ph + N + GNDShort-circuit rating: 10 kAProtection rating: IP54Compliance: CE markedAdvanced Automation & Control SystemsEngineered for dependable, automated case handling, this case packer supports stable, repeatable performance with CE-compliant electrical architecture. The machine’s power and control specifications (400 V, 50 Hz, three-phase) align with standard industrial automation environments, facilitating straightforward connection to existing line controls and supervisory systems. Safety-rated circuits and integrated protections support safe operation and ease of maintenance within modern packaging lines.Production Line Integration CapabilitiesDesigned for flexible line layouts, the Apsol Case Packer integrates upstream with fillers, labelers, and conveyors and downstream with case sealers, printers, and palletizers. It is suitable for beverage production and industrial packaging scenarios where bottles, cans, or jars are collated and loaded into cartons or cases. Its balanced throughput of 7–9 boxes per minute helps harmonize line speeds without creating bottlenecks.Machine Condition & Maintenance HistoryManufactured in 2020, this second hand machine is offered in working condition and ready for operation. The electrical specifications confirm contemporary design standards, supporting efficient recommissioning within a used bottling line or as a standalone case packing asset.Operational Performance & VersatilityThe machine’s performance profile is well-suited for beverage packaging applications, including the collation and loading of PET or glass bottles and aluminum cans into cases, as well as general industrial packaging tasks. With its steady output range, it fits small to mid-speed lines seeking reliable case packing with consistent pack quality and minimal downtime.Installation Requirements & Site PreparationInstallation requires a three-phase 400 V, 50 Hz electrical supply with sufficient capacity for the 26.5 kW load and 49 A full-load current. Plan for appropriate floor space to accommodate infeed and outfeed conveyors and to allow safe operator access for changeovers and routine service. The IP54 protection rating supports installation in typical product... Nedpfx Ao Adt Nnjirslh