Used Laser Board for sale (6,575)

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm Duodjrwwzyspfx Afpon • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Dedpfxoxvwcxo Afpjun Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration Dedpfjwxar Dsx Afpjun

Condition: used, functionality: fully functional, Year of construction: 2020, We provide laser REPAIR services for all kind of IPG lasers. We replace broken laser modules with referbished fully functional ones, do all adjustments and make your fiber laser up and running! No matter what the problem is with your IPG Laser Source, we bring it back to life. Not only IPG sources, we repair Max Photonics, Raycus and other laser sources with our more than 10 years of experience in fiber laser industry. Dusdpfswf Hxqjx Afpsn

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welder was manufactured in 2014 in Germany by Alpha Laser GmbH but has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9 kW laser beam power), which enables the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts at any chosen location. Welding is performed in semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the workpiece. The unit is controlled via computer, joystick, and foot switch. The machine is in excellent technical and visual condition, with regular servicing. The machine comes complete with a table. Price: 180,000 PLN net (VAT invoice available). Technical specifications of the ALPHA LASER ALM 200 laser welder: – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: pulsed – Focal length: 150 mm – Power supply: 380 V / 50-60 Hz / 16 A / 8 kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11,065 – Serial number: 03001212-03.14 Additional features and equipment of the ALPHA LASER ALM 200: – Optics: LEICA microscope mount with 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Various spare parts and accessories (e.g., lamps, hoses, wire holders, detail positioning balls/bases, magnets) available at competitive prices – Various welding wires available at good prices Duodpfxotqtrfs Afpsn – Option to purchase a fume extraction system

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, Series: GB-E Bending pressure: 130KN Dodpfx Ajwzqn Uefpsun Bending length: 600(mm)

Condition: used, functionality: unexamined, Year of construction: 2003, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, type plate available, TRUMPF Laser HL204P/4 LCU * used, MFD 2003 * av. laser power: 200 W * max. pulse power: 7 kW Duedpfx Ajxxbnkofpon * max. pulse energy: 75 J * wavelength: 1064 nm * beam switch for 2 fibers, min. core diameter 400 µm * fiber connector: LLK-B * incl. control PC * incl. foot switch * incl. 2 fibers, each 1 cutting- und welding head and 1 binocular * incl. documentation (German)

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Duedeu Smd Ejpfx Afpon Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Dujdpfxexxih Es Afpen Carbon traverse (crossbeam) Composite body Pallet changer Various nozzles Protective lenses

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, DNE-Laser, a wholly owned subsidiary of the Bystronic Group, has established itself as a leading manufacturer of laser cutting machines. The product range includes tube and profile lasers as well as flatbed lasers, which are known for their robustness and user-friendliness. Each machine is easy to program. In addition, it is possible to connect an automatic tube feeder to the machine using a semiloader and a bundle loader. Only reputable and high-quality components are used in the construction of the laser machines. This integration significantly increases efficiency in the production process. The time savings when loading the machine are significant, as manual handling is reduced. This not only leads to faster production times but also minimizes the cost per part. Processing lengths of raw material: 6.9-12 meters, diameters from 8 to 520 mm, power up to 12 kW... Investing in a DNE laser machine offers not only excellent value for money but also long-term support from the service provided by Airtech Stickstoff GmbH, which has its own highly experienced and competent service team for over 10 years. Dedpjwmyv Ssfx Afpoun Reliable spare parts supply ensures the operational readiness of the machines and minimizes downtime. Currently, around 110 laser machines are on the market and in operation through Airtech Stickstoff GmbH, which impressively demonstrates the high demand and customer satisfaction. DNE-Laser thus remains a top choice for companies looking for high-quality and reliable laser cutting solutions.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz Dusdpfx Aswzv D Iofpen - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: new, Year of construction: 2025, DNE pipe and profile laser cutting machines (one of the best systems on the market) are characterized by a top price-performance ratio. The machines are robust, fast and dynamic in operation. You can choose between a semi-automatic and a fully automatic pipe loader. These machines are available with diameters of up to 240mm, 350mm and 520mm as well as 640mm. Laser outputs from 3 to 12 kW and lengths of up to 12 meters. A 45 degree laser cutting head is also available. We would be happy to make you an offer and are convinced that you will be satisfied. Dsdowzv Efjpfx Afpoun Our own German service team will accompany you from the installation of your laser cutting system to training.

Condition: new, Year of construction: 2025, DNE-D-Soar plus is a state-of-the-art solution for contract manufacturing that impresses with extremely fast and dynamic cutting processes. This device sets new standards in almost all cutting areas and offers superior performance, which is reflected in the best workmanship. The simple operation ensures that even less experienced users can quickly become familiar with the machine. In terms of price, DNE-D-Soar plus is extremely attractive and represents an economical alternative to the well-known system manufacturers who value quality without breaking the budget. This system is available with either full or partial automation. The attractive design fits harmoniously into modern production environments. Thanks to Bystronic's many years of experience, innovative technologies and proven processes have been incorporated into the development of this machine. Dodpfxsuiyr Ij Afpoun Overall, DNE-D-Soar plus is an excellent investment for companies looking for a powerful, flexible and future-proof cutting system. The machine is available with 45 degree laser heads. Length from 4,000 to 12,000 mm Width up to 2,500 mm Laser power from 15,000 watts to 60,000 watts Maximum axis speed 280 m/min x/y Maximum acceleration 2.8 G Hydraulic material table Machine weight from 12,500 to 29,700 kg Hydraulic table included

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: -, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 40 mm, sheet thickness copper (max.): 40 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 2,050 mm, travel distance Y-axis: 4,050 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,800 kg, power: 6,000 kW (8,157.72 HP), type of input current: three-phase, type of cooling: water, overall weight: 9,500 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, Equipment: cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production Dodswzv E Sspfx Afpeun The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, table length: 4,000 mm, table width: 2,000 mm, cutting speed: 2,800 mm/min, workpiece weight (max.): 3,000 kg, overall weight: 18,500 kg, total length: 12,500 mm, total width: 3,650 mm, total height: 2,620 mm, warranty duration: 12 months, working range: 4,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, Standard Equipment Raycus fiber laser source Bystronic DNE Copyright cutting head Bus control cutting software Hypcut FSCUT 8000C Herion rack and pinion M3 Parallel shuttle table (two levels) TBI ball screw (Taiwan) Won linear guide (South Korea) Neugart reduction gear (Germany) Servo drive and motor Inovance or Schneider Welded machine tool body PC "I7_CPU 8GB 120GB 10kW Monitor Capacitive touchscreen (21.5-inch XC-2209CMDR) Proportional valve "Felton low pressure 10kW PLC hardware Schneider Djdpswna S Aefx Afpeun Electrical control cabinet Independent control cabinet (Bystronic DNE Copyright) Hydraulic shuttle table Exhaust system 7.5 kW Resonator 36 kW Chiller 15 kW

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, The D-Power laser cutting machine with shuttle table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and a laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide range of applications. A particularly noteworthy feature is the pivoting laser head, which can be ordered separately if required to enable bevel cuts. This functionality significantly expands the machine's application possibilities, creating scope for creative solutions in metalworking and beyond. The price-performance ratio of the D-Power laser cutting machine will surprise you. You get high-quality technology and performance at an attractive price, making it an excellent choice for companies and craft businesses looking to enter the world of laser cutting. Take advantage of cutting-edge technologies and increase the efficiency of your production processes with this powerful and versatile machine. Dsdpfx Aswnbmnefpeun

Condition: new, functionality: fully functional, Year of construction: 2025, This machine convinces with a top price-performance ratio and CE standard. You will be surprised. DNE laser cutting machines for professional use in industry and trade. We offer you an absolute top product in terms of reliability and cutting performance tailored to your needs. Duedsq U A H Ajpfx Afpsn Our German service team ensures smooth installation and commissioning of the laser cutting system as well as subsequent training. We also carry out service and maintenance work. You can also contact us if you are looking for financing. You are welcome to convince yourself of the statements made during a visit and demonstration. A 45-degree laser cutting head is also available for processing welding bevels or countersinks. The laser cutting machines are available in the following processing sizes: Sheet metal nominal dimension X 3000 mm x1500 mm, 4000 mm x 2000mm, 6000 mm x 2000mm, 6000 mm x 2500mm. Laser power from 2000 watts to 15,000 watts is available.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, pipe diameter (max.): 240 mm, workpiece weight (max.): 500 kg, total length: 14,000 mm, total width: 2,000 mm, total height: 3,000 mm, working range: 6,500 mm, Equipment: cooling unit, documentation/manual, Tube Cutting Machine DNE - Member of Bystronic group The fiber laser tube cutting machine DNE LASER D-TUBE F is an innovative product specifically developed for the profile and tube cutting market. It features precise control of tube support devices and chucks, offering exceptional performance. The machine is versatile in cutting materials and types, covering a wide range of applications, including carbon steel, stainless steel, aluminum alloys, and more. It can process different profiles such as round tubes, square tubes, U-channels, I-beams, and custom-shaped tubes for cutting, drilling, and contour cutting. It is a highly automated, efficient, and cost-effective tube cutting system. Description Dujdpfxswnbhrj Afpen Laser power: 6000 watts Round tube: 15 - 240 mm Square tube: 15 x 15 - 240 x 240 mm Rectangular tube: 15 x 15 - 230 x 230 mm Max. positioning accuracy X,Y-axis: 0.05/1000 mm Max. positioning accuracy U-axis: 0.05/1000 mm Max. tube weight: 40 kg/m Max. tube weight: 500 kg Length: 14000 mm Width: 2000 mm Height: 3000 mm 40° cutting head Bevelcut Semi-automatic loading Exhaust system 7.5 kW Nesting software

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 4,000 mm, table width: 2,000 mm, positioning accuracy: 0.05 mm, workpiece weight (max.): 1,800 kg, overall weight: 8,000 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. Duodpfx Afewnmh Repen The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: new, Year of construction: 2025, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Duodpfx Afsn Sl D Ropjn

Condition: new, Year of construction: 2024, machine/vehicle number: BN20XS "Standard", shaft length: 1,064 mm, workpiece weight (max.): 5 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, working range: 70 mm, overall weight: 30 kg, warranty duration: 12 months, height adjustment type: electric, sheet thickness aluminum (max.): 3 mm, door opening width: 400 mm, door opening height: 350 mm, travel distance Z-axis: 100 mm, JEWELliner "XS2" model series "Standard" with 20W CW laser power. Dsdpfx Ajppxlmsfpoun - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L50xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - optional ring inside (f.e. name, date, symbol, handwrite) optional - optional ring outside (f.e. name, endless graphic, endless pattern) optional - optional bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS2" ( BN20XS2-HR ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 100x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software - rotation axis Specification: - laser technology: fiber laser - outputpower CW: 20W - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 70 x 70 mm – smaller possible - focus range: ca. 1.0 mm - min character high: 0.15 mm - min. line width: 0.020 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L500 x W400 x H500 mm - weight: 38kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2024, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Dedpfef Ul Uiex Afpjun Pictures can be different!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: JEWELliner "XS" PRO Modell "Premium", type of input current: AC, laser power: 30 W, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Premium" with 30W CW laser power include camera - electric lift door - auto-focus - compact machine dimension - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, Dodpfx Aoppxmkofpeun brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Premium" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - rotary axis with removable jewelry jaw chuck - configured engraving software - high resolution industrial camera USB 3.1 Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save Dujdpsc Rmy Nefx Afpsn - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Year of construction: 2023, condition: new, Laser head: Raytools Autofocus Dusdpfx Afsmx R Tmepon Laser source: 3kW Raycus Servo motor: Yaskawa System: FSCUT 5000 A CAD-CAM: Tubest, Tube Pro Tube length: loading 6000mm, unloading 3000mm Tube diameter: 15-230mm Maschinengröße: 12821x3726x2430mm