Used Laser Board for sale (6,920)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Bwodpfx Adezg D I Aegjw NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Bwedpfxjzyzwns Adgjw Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 New price: €130,000.00

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 3315N130, Year of construction: 2015, total length: 995 mm, total height: 1,600 mm, total width: 1,050 mm, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, electrical fuse: 16 A, space requirement length: 3,000 mm, space requirement height: 2,400 mm, space requirement width: 1,200 mm, Misan is Czech authorized reseller for machining centers and metal AM machines. Concept Laser QM Powder - inertized industrial powder sieve: - For Concept Laser / GE Additive / Colibrium Additive M2 powder containers. Also compatible with M1 and Mlab bottles. May be used with another machines with compatible bottles. - Suitable for steel, aluminum, inconel, titanium alloys. - Size: 1050 x 995 x 1600 mm - Weight: 350 kg - Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz - Requires inert gas supply: argon or nitrogen, 5 bars Bsdpfx Aez Tf Hfsdgoww Equipment used by customer. First installed in 2015. Fully refurbished by Misan now (new seals, filters, hoses, overflow bottle,...), clean and functional. New container console. Original price: 25.000 Eur We are awaiting your contact. Video conference can be set up if needed. Sieving station can be seen at our showroom. Visit is possible upon contact.

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Designation / ID: FD060 Serial number: 01 Date of manufacture: 07.2022 (Code: 22-07-00) Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Bwsdsz R Eiuspfx Adgsw Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE).

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 25 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of input current: three-phase, type of cooling: water, overall weight: 5,500 kg, door opening width: 3,000 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 12 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our attractive leasing/hire-purchase offers. - Machine with automatic exchange table - Machine bed lined with graphite plates - Machine measured and adjusted with Renishaw system (including measurement protocol) - very space-saving - extremely energy-efficient cutting system - requires only approximately 8.5 x 3.5 meters of floor space - 12 kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule a viewing now! Cutting of steel sheet up to 35mm Cutting of stainless steel sheet up to 20mm Cutting of aluminum sheet up to 20mm - Travel range 1500 x 3000mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures of the cutting head - on three sides, large laser protection windows for observing the cutting process - automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser chiller - Machine control in German - extensive service and warranty services - powerful laser chiller - Filter extraction optional The following options are also available: - automatic nozzle changer (optional) - automatic nozzle centering (optional) - Raw material sheet detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5m Height: 2.3m Bwjdpjxg Dn Asfx Adgow Width: 3.5m Total weight: approx. 8000kg Do you need a different laser power, different table shape, or different table size? No problem. I will gladly prepare a suitable offer. For example, a 2 kW machine from 29,990 euros or a 6kW machine from 79,900 euros Are you unsure which laser power is suitable for your application? Just call us! Of course, I will carry out cutting tests according to your requirements. There are many possibilities here.

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: cooling unit, documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Hörbiger laser gas system 2 CCD cameras Bwodpfxoy Ed S Ij Adgsw Teka extraction unit ECO-Cube

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications Bedpfx Ajwm Nu Dodgoww • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Condition: good (used), Year of construction: 2011, machine/vehicle number: 11095150, IPG Laser GmbH used 4kW laser source with cooling unit Bwederq D D Eepfx Adgow 400-460V AC 3P/PE 50/60 Hz 30.8A year of construction 2011 DWG number: G25-16-100920-2 Cooling unit: LC170.01-W3.5 Year of construction 2010 3/PE - 400V 50Hz 21,8A 4pcs available

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, type of input current: AC, total height: 1,300 mm, total width: 600 mm, total length: 1,100 mm, input voltage: 230 V, overall weight: 150 kg, type of cooling: water, electrical fuse: 32 A, space requirement height: 1,300 mm, space requirement length: 1,500 mm, laser power: 200 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, Laser welding machine with 200 watts of laser power Bwedez Hwzmspfx Adgjw - Programmable spot diameter - Motorized focus adjustment - Includes rotary axis with three-jaw chuck - Machine (year of manufacture 2025) from our showroom with minimal operating hours - Lamp-pumped YAG laser - Spot welding machine for the finest welding tasks - For jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3 mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - Includes optical microscope (10x) - Additional CCD microscope with crosshair - Current, pulse width, repetition rate, and frequency adjustable on the control panel - Includes protective gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200 watts of power - External cooling - Power connection 230 volts / 32 amps - German menu Machine dimensions approx.: Width: 60 cm, Height: 120 cm, Depth: 110 cm, Weight: approx. 150 kg

Condition: new, Year of construction: 2025, functionality: fully functional, laser wavelength: 1,064 nm, AL-IN 300 W, laser welding machine, demonstration unit, like new, 1-year warranty, mounted on the original pallet, partially still packaged. Additional demo units available on request. Sales only within the EU. - X, Y, Z axes powered, operable via joystick and semi-automatic mode - User coordinate system (UCS) – automatic Z-axis guidance for welding on inclined planes Accessories: Tilting/swiveling optics Ergonomic wedge for optimal working position Multi-function foot switch Bwodpfx Adopcf Ntsgsw Angled base with table plate for ALT-base C Beam deflection unit, swiveling 110° L/R, including 12V External cooling (unregulated) Laser welding consumables, Lawitex starter kit. As a laser welding wire manufacturer, we can create a custom wire selection for your specific requirements. Welding parameters will be personally explained, saved, and made easily retrievable for you. We supply genuine Alpha Laser spare parts and offer application/product training as well as service at attractive conditions. We are the official sales partner for Alpha Laser laser welding systems. With almost 30 years of experience in welding technology, we offer advanced laser welding technology from a single source. Inquiries, explanations, welding training, and instruction (also by phone) are available in German, English, and Polish. Supplier Lawitex GmbH 40764 Langenfeld (Rheinland), Germany

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Bsdpjy Efbksfx Adgjww

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm Bsdpfsz D D N Ejx Adgjww These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,288 h, laser power: 300 W, travel distance X-axis: 700 mm, travel distance Z-axis: 650 mm, number of axes: 3, This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details. • Working area size: 500 x 700 mm • Material support table: 550 x 750 mm • Max. weight of material to process: 40 kg/m2 Bjdpezdi I Njfx Adgjww • DSP running time: 6744 h • Power ON time: 4579 h • Execution time: 1288 h

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Voltage stabilizer & regulator unit CE mark Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Bwedpfoyhclwex Adgjw Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: used, Year of construction: 2018, machine/vehicle number: 1803006, with extraction system, manufactured by LOTUS LASER SYSTEMS, and an additional pre-filter extraction system, type: VACUAIR UML 350, in new condition. Bwjdez Nhr Ajpfx Adgow

Condition: good (used), Year of construction: 2020, In this offer you purchase a used collaboration board "Cisco Webex Board 85S" Object of sale: 1 x Cisco Webex Board 85S: approx. 21 boards in stock also available in size 70" and 55" Without stand/wall mount The Webex® Board is an all-in-one device that offers everything you need to collaborate with your teams in physical meeting rooms. You can present wirelessly, use whiteboards and make video and audio calls. And it securely connects to your virtual teams via the Webex service or via your Webex app-enabled devices, so you can take your meetings and content on the road. Condition: This offer is for a used device that may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for functionality Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Bsdpfxjqydw Ij Adgoww Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 12,000 W, working length: 2,030 mm, working width: 4,020 mm, power: 12,000 kW (16,315.44 HP), type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, X-Axis Travel(mm）: 2050 Y-Axis Travel(mm）: 4050 Bwodswxaq Topfx Adgew Z-Axis Travel(mm) ：270 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 170m/min Maximum Acceleration: 2.5G

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, travel distance X-axis: 1,524 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, EC3 Single Platform Fiber Laser Cutting Machine The EC series is an economical single-platform laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most of sheet metals. TECHNICAL SPECIFICATIONS Features • Compact and complete CE electrical panel with safety relay on the back side of the machine equipped with AC unit, protected from dust. • Operating panel with large LCD display and movable arm mount, easy to use. • Loading weight up to 1000kg • Auto-focus laser head with automatic detection • Industial components with high durability • Both sides access for dust trolleys • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.524 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max. loading weight: 1.000 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m Bsdpfxsxfi Irs Adgoww X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 100 m/min Max. Acceleration Speed: 1.0 G Power Parameters Power Supply: 12.3kW/32A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 4.530 * 2.280 * 1.310 mm Machine Weight: 2.000 kg Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: mechanical, laser type: fiber laser, laser power: 6,000 W, power: 6 kW (8.16 HP), type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Type: Exchange table, full protection, full protection exchange table Bodjwxar Dopfx Adgjww Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany XXL Workstation – Custom Construction: - Standing workstation with table height designed for standing operation - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Bwsdpfxeyimz As Adgsw Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm,

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser Bwedpjz Ahccsfx Adgow • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS Model-S1530 Working area: 3.060*1.530 mm Laser power: 3 kW OR 6 kW Strokes on axele X/Y/Z: 1.500 / 3.000 / 100 mm Bwsdpfx Aoxfrgkedgjw Motors power on axes X/Y/Z: 0.85kW / 1.3 kW(x 2 dual motors) / 0.4 kW Maximum loading table: 800 kgs Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.02 mm Maximum speed: 80 m/min Maximum acceleration: 0.8G Exhaust system: Included (with 1,5 kW fan) Machine size (L*W*H): 4.950*2.280*2.130 mm Total weight: 4.550 kgs Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes Bodpfxjyim S Io Adgsww - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Condition: new, Year of construction: 2025, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Cutting area 6000 × 1500 mm X‑axis travel 1520 mm Y‑axis travel 6020 mm Z‑axis travel 80 mm Bwodow A Ik Nspfx Adgjw Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L × W × H) 14500 × 2300 × 2380 mm Floor footprint 15500 × 2800 mm Net weight 6000 kg Fully automatic cutting, material saving, fast speed

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: Bwedpfx Adoyimpaegow - New machine - CE · Made in Germany