Used Laser Cutting Systems for sale (49,412)

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 Gisdpfx Aeqh Efiectsw -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system Gsdpow S E E Iefx Actsiw -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg

Condition: good (used), Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill Giodpfx Aeyuu H Hectsw -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. Giodpehv U S Tjfx Actow The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, FSCUT Ethercat CNC Control System DELTA Ethercat Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Giedpfxjnr Hcwe Actew Raytools / BLT Series Cutting Head Laser source 6kW HanLi Chiller Gross weight around 9.5ton Optional: bevel cutting for sheet

Condition: new, Year of construction: 2024, 5 Axes FSCUT 3000S CNC Control System DELTA Servo Driver & Motor System Hiwin Guide Liner SMG / KH Rack Raytools / BLT Series Cutting Head HanLi Chiller Gisdpfx Ajnr Hghsctew SMC Proportional Valve. Dairuike Auto Pneumatic Clamp φ220mm Various Diameter Wheels Pneumatic Support Loading Assist System Gross weight around 5.5ton

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 1,000 kg, overall weight: 5,000 kg, Including 7.5 kW extraction system Compact, space-saving, and affordable fiber laser Manually extendable work table - electrically assisted Gisdpfx Acswf H Avjtjw Work table safety door opens and closes electrically Sturdy welded construction for high rigidity, precision, and durability Machine bed shielded by manganese steel plates to protect against heat, sparks, and slag Effective cutting fume extraction; controlled flaps focus the extraction power on the current work area Raycus laser source with autofocus laser head from HSG (optional laser source from IPG) Laser head with faster focusing speed than comparable units, resulting in higher penetration speeds with thicker materials Main lens protected by an easily replaceable double protective lens Efficient water cooling of the laser head Power stabilizer to compensate for voltage fluctuations, thus ensuring consistent cutting quality Very easy handling of the machine and the user-friendly software Control software with numerous templates for programming simple components Material storage management User-friendly nesting software with many features Camera-monitored laser work area with transmission to screen

Condition: used, Year of construction: 2012, control type: CNC control, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness steel (max.): 14 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness copper (max.): 5 mm, workpiece weight (max.): 750 kg, year of last overhaul: 2024, Equipment: cooling unit, documentation/manual, safety light barrier, For sale: Salvagnini 3kW Fiber Laser. Year of manufacture: 2012. The L3 is the first 2D laser cutting system designed and developed entirely to leverage all the advantages of fiber laser sources and linear drives, with features that make it the ideal solution for our customers’ requirements, such as: - Ease of operation - High productivity - Lower operating costs - Reduced energy consumption Key features of the L3 laser cutting system include: - Simple architecture with a purpose-built gantry structure, combining rigidity, precise positioning, high dynamics, and easy accessibility to the work area; - Highly efficient IPG fiber laser source; - Efficient control console for extremely easy and versatile production management, even directly from the machine PC; - High modularity of loading, unloading, sorting, and storage devices, offering a broad range of solutions for specific needs: from basic automation to fully automatic, unattended operation. Gisdpevulggofx Actsw Automatic pallet changer system for the laser table. Each table is equipped with steel, replaceable grids. Maximum sheet size: 3048 mm x 1524 mm Z-axis travel: 100 mm Maximum sheet weight: 750 kg Working table height: 980 mm Material Cutting capacity Mild steel (S185JR, S235JR, RAEX 250 C LASER): 14 mm Stainless steel (AISI 304, X5CrNi18-10 1.4301): 10 mm Aluminum (Al 99.5 EN AW 1050A): 8 mm Copper (Cu-ETP CW004A H040 EN1652): 5 mm Brass (Cu Zn CW508L H055 EN1652): 5 mm L3-30 L3 Laser System GF Steel grids CRS Scrap containers SiX Controller FLR20 3000W Fiber resonator with chiller unit ASF Fume extraction ACUT Compressed air cutting option ADB Automatic sheet loading system Office Software Office software included

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Giedpjy Ai Ehofx Actew Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: new, Year of construction: 2025, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Gjdpfsg Dgbdox Actoiw Condition: New Laser Type: Fiber Laser Cutting Area: 6100mm*2500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost.

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m Gedpox E Eihsfx Actoiw SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, Year of construction: 2010, Laser cutting machine Godpfxeyvk R Ee Actsiw Manufacturer: Eurolaser Type: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous area of application: Cutting of acrylic glass Laser source was replaced 5 years ago. ä2726

Year of construction: 2017, condition: ready for operation (used), A Trumpf CNC 2D solid-state laser cutting machine is available. Laser source: Trumpf TruDisk 4001, laser power: 4kW, wavelength: 1030nm, working dimensions X/Y: 3000mm/1500mm, Z-axis travel: 75mm, max. workpiece weight: 900kg, max. simultaneous traverse speed: 140m/min, max. mild steel thickness: 25mm, pallet changers: 2. Machine dimensions X/Y/Z: approx. 8300mm/6800mm/2300mm, weight: approx. 7750kg. Documentation available. An on-site inspection is possible. Expected to be available starting 2027. Giodjzk Nbcepfx Actow

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Gsdpfxshwhf Hs Actjiw Cooling Mode: WATER COOLING

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 15 mm Sheet thickness copper: 4 mm Sheet thickness brass: 3 mm Laser power: 3,000 W Laser model: TruDisk3001 (4C) MACHINE DETAILS Control type: CNC Last documented maintenance: 10-12 Sept 2025 Operating hours (as of 09/2025): 53,082 h (currently approx. 54,000 h) Dimensions & Weight Space requirement: 9,300 x 4,700 x 2,200 mm Machine weight: 12,700 kg Electrical connection: 40 kVA / 80 A Electrical power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Godpfxezg Er No Acteiw Extraction system Operating manual Chiller + extraction system Compressor not included Note: Transporting the machine requires 1 standard truck and 1 truck with a width of 3m.

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Maxphotonics, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, Why still bother with the cut quality of fine plasma systems? Why still waste valuable space in your workshop with a rotary table? Why still spend thousands of euros each year on expensive plasma wear parts? In addition to the obvious advantages of modern fiber laser technology regarding precision and virtually burr-free laser cut quality, laser cutting is surprisingly cost-effective. At the same time, laser cutting is much easier to operate than plasma cutting systems. And the best part is that we, Schmidt & partners Cutting, support your system from our two service centers throughout its entire service life. We are a reliable partner in the cutting world, providing perfect consulting, installation, training, maintenance, and repair services. We support you with our know-how and experience, including cutting parameters for special materials. We also gladly assist you with the implementation of this technology in your company, particularly with regard to the specific occupational safety aspects of laser technology. kaitec FIBER Pro HGLQ 3015 Giedpszkuu Iofx Actjw Cutting area 1,500 x 3,000 mm Max. sheet thickness 35 mm (depending on the laser source power) Laser systems 2kW / 3kW / 4kW / 6kW / 12kW Maxphotonics series (in cooperation with AK Industry GmbH, the certified service partner in Germany) CE certified, risk assessment completed Do you not yet have a suitable filter system? We will gladly select the appropriate filter system to meet your needs. We look forward to hearing from you!

Condition: excellent (used), IPG Type: YLS - 5000 Description: IPG Ytterbium laser system YLS-5000-S1T 5 kW laser power Compact footprint Highly efficient ECO modules Compatible with all types of processing heads Independent power control via field bus interface Extended IPG power supply with integrated safety features Laser emission ON watchdog Godpfxszg Evus Acteiw Data: YLS-5000-S1T 400-460V AC 3P/PE 50/60Hz 59A 63A/80kA Year of manufacture: 2011, Serial number: 11101050 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Gjdpfx Aozg U Akectjiw Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 3kW fiber laser Exhibition machine (used/very good condition) with few operating hours (approx. 100 hours) Our aim is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. The ideal entry point into laser cutting technology at a great price - Designed specifically for steel and stainless steel processing Exhibition machine with very few operating hours - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters of floor space - Top quality, arrange a viewing now! Cutting of steel sheets up to 20mm Cutting of stainless steel sheets up to 10mm - Travel range approx. 1300 x 1300mm Size of the support table: approx. 1300 x 2500mm (i.e. a whole medium-format sheet fits into the machine) - Machine control in German - Automatic front door (secured with a light barrier) - Comprehensive collision protection measures Gedpfxoy A Tu Te Actoiw - Large front window for observing the cutting process - Programmable, proportional valve for oxygen - Incl. cutting parameter file - Incl. drawer module - Very easy to operate. - Powerful laser chiller - Incl. extensive set of wear parts The sale is exclusively to commercial enterprises. Delivery / consultation / sale only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2m Height: 2.3m Length: 3.3m Total weight: approx. 3400kg Leasing or hire purchase is possible via our financing partner. Do you need a different laser power, a different table shape or table size? No problem. I will gladly create a suitable offer. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here. From 0.5 kW to 20 kW laser power.

Year of construction: 2010, condition: ready for operation (used), A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible. Gsdpfszkldyox Actsiw

Condition: used, Year of construction: 2003, table length 5040 mm table width 1550 mm 12 mm plate weight max. 330 kg travel -x axis 2520 mm travel -z axis 300 mm travel -y axis 1550 mm cutting speed 20 m/min feed speed X/Y/Z 80/80/60 m/min Gjdpfx Acovxwytjtjiw positioning accuracy +-0,01 mm/500 mm mm repeatability +/- 0,005 mm table height 820 mm size of opening 550x1550 mm compressed air 6/20 bar total power requirement 10 kW weight of the machine ca. ca. 6,5 t dimensions of the machine ca. 2,5x5,7x2,3 m Turbo blower replaced at 36,000 hours Compressed air dryer Alphapac 0015 SP Basement flue gas extraction type Vario T 1.5A Air conditioning unit RIEDEL PC 315.21-NE-LAS Laser radiation within class 1 The machine was regularly serviced

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber 6001 G, laser hours: 1 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, workpiece weight (max.): 8,000 kg, input voltage: 400 V, input current: 125 A, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 8,000 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, JFY BFC+ 6 kW Fiber Laser with TRUMPF laser source – a new sheet metal cutting machine We offer a state-of-the-art JFY BFC+ 6 kW fiber laser equipped with a high-quality TRUMPF laser source. The machine is designed for precise, fast, and efficient sheet metal cutting in manufacturing and service facilities. The JFY BFC+ 6 kW is an excellent solution for companies involved in sheet metal processing, steel structure manufacturing, machine component production, enclosure manufacturing, industrial component production, and ventilation component production. The 6 kW power provides high cutting performance and a wide range of processing capabilities for various materials. The machine combines the robust JFY construction, stable cutting process, and TRUMPF laser technology. By using a TRUMPF source, the user receives high beam quality, excellent process repeatability, and reliability in daily production. Key advantages of the machine: * Laser source power: 6 kW, * TRUMPF laser source, * Fiber laser technology, * High cutting speed, * Stable edge quality, * Precise cutting head with autofocus, * Robust machine construction, * Intuitive operation, * Quick production setup, * Ability to cut various materials, * High part repeatability, * Excellent value for money, * Technical and service support in Poland. Applications: * Cutting of carbon steel, * Cutting of stainless steel, * Cutting of aluminum, * Cutting of structural elements, * Production of enclosures and machine components, * Production of ventilation components, * Serial and single-piece production, * Laser cutting services. Godpfx Acjzhab Iotsiw Commercial information: The machine is available from ANFAN Sp. z o.o. – the official representative of JFY International in Poland. We can prepare an individual machine configuration based on customer needs, worktable size, loading and unloading system, and additional equipment. Please contact us for a detailed offer, technical specifications, and delivery terms.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Giedpfxohwhfus Actjw Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, laser power: 12,000 W, LASER FIBER 12 kW SERON – POWERFUL PERFORMANCE | 210 m/min | READY FOR PRODUCTION | AVAILABLE IMMEDIATELY | FAST DELIVERY Are you looking for a machine that will truly increase your production and reduce costs? The Seron FiberCut 12 kW laser cutter is the solution for companies that refuse to compromise. ✔ Extreme cutting speed up to 210 m/min ✔ Perfect edge quality – no additional finishing required ✔ Repeatability of 0.01 mm ✔ Maximum efficiency with uncompromising precision This is not an “ordinary laser” – it’s a premium-class production machine, ready for high-performance operation. KEY SPECIFICATIONS: Working area: 1550 x 3050 mm Power: 12 kW (Maxphotonics) Precitec Procutter head (autofocus / automatic nozzle distance control) Bosch Rexroth linear drives Acceleration: up to 2G Giedpfx Aex Rcgboctow Max speed: 210 m/min Pallet exchange system – continuous operation without downtime Bosch Rexroth control system (remote service, complete process control) ADVANTAGES OVER THE COMPETITION: - Monolithic, stress-relieved frame = years of precise operation - Lightweight and rigid gantry = greater dynamics and efficiency - Vision system (2 cameras + monitor) = complete production oversight - Fully enclosed housing + safety curtains Machine ready for operation – demonstration and testing possible. Contact us now – unit available immediately.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Bystronic Bystar 3015 Flatbed Laser CO² + Bytrans Cross 3015 (Sheet Metal Automation) Laser medium: CO2 Laser beam diameter: 20mm Laser power: 4.4 kW Gjdpeyztchofx Actsiw Machine dimensions (L/W/H): 9500/6500/3500 (incl. Doldson extraction system) Table length and width: 3000/1500 mm Cutting area -x/-y: 3000/1500 mm Sheet thickness steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm Machine operating hours: 106,367 h Laser operating hours (excitation module): 73,725 h Beam on hours: 50,873 h Includes: Depro 6-SPRK extraction system Bylaser 4400 resonator WKL 430 chiller unit Subject to prior sale, modifications, and errors!