Used Lathe Shaft for sale (11,184)

Condition: good (used), Year of construction: 2004, The machine is powered and available for inspection. Pgodpoy Eb Rhofx Akfjk

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Podpfoy Eb N Dox Akfogk

Condition: good (used), Year of construction: 2013, operating hours: 44,500 h, EMAG VL5i vertical turning machine (2013) Pgjdpfx Aksy Ef Hmsfsk Manufacturer: EMAG Type: VL5i Year of manufacture: 2013 Operating hours: 44.500 Condition: good, used, in production Control SIEMENS 840 D SL Emulsion mist extraction chip conveyor Further information will follow

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Gap length: 320mm Pgjdpfx Ajvn Svujkfjk Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: used, Year of construction: 2021, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, turning diameter: 32 mm, spindle bore: 39 mm, overall weight: 2,900 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 39 mm, power: 13.2 kW (17.95 HP), We are offering this used CITIZEN L32-1M10 automatic lathe, manufactured in 2021. Model: L32-1M10 Serial number: V36540 Production number: L32A/2251 Date of manufacture: 2021-11 Total load current: 36 A Rated power: 13.2 kVA Short-circuit breaking capacity: 2.5 kA Weight: 2,900 kg ON/OFF: 6,851 hours (as of 22.04.2026) Operating hours: 19,327 hours (as of 22.04.2026) Pgsdpfsy Em Dyex Akfek If you have any questions or need further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2005, Capacity: Max. swing diameter Ø 650 mm Max. turning diameter Ø 420 mm Max. turning length 1134 mm Chuck 10" Spindle bore Ø 75 mm Spindle: Motor power (continuous) 11 kW Motor power (30 min.) 15 kW Maximum spindle speed 3,500 rpm Axes: X-axis travel 240 mm Z-axis travel 1200 mm Optional Y-axis: ± 55 mm / 110 mm (total) Turret / Tools: Turret positions 12 stations Pgodsy Edalepfx Akfok Optional driven tools: Holder ER32 Speed up to 4,000 rpm Options: Sub-spindle: Speed up to 6,000 rpm Power 5.5 /7.5 kW Dimensions: Machine 3500 x 1900 x 1900 mm Machine with Y-axis 3500 x 2040 x 2260 mm Machine weight 6,100 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 200 rpm, turning diameter: 32 mm, spindle bore: 39 mm, overall weight: 2,850 kg, rotational speed (max.): 8,000 rpm, rotational speed (min.): 8,000 rpm, type of input current: three-phase, bar passage: 39 mm, Space requirement: approx. 2.5 x 1.4 x 1.75 + FMB m CNC long-turning lathe: Citizen L32-1M8, year 2018, equipped with FMB turbo 3-36 bar feeder and a swarf conveyor with "0" operating hours. LFV function: not available ON/OFF: 5,465 hours (as of 2026.04.22) Pgedpfxey Emnfe Akfjk Operating hours: 32,110 hours (as of 2026.04.22)

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Pgjdpfjy Ehntsx Akfek

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm turning length 1000 mm Pgodpfoy D T Uvox Akfjk control Siemens / Weiler D2 weight of the machine ca. 3,2 t dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: as good as new (ex-display), SHOWROOM MACHINE For sale is an as-new Drechselmeister Stratos FU 230 LV (long version) wood lathe, with a center distance of approx. 1,000 mm / 1 meter. The showroom machine is in original condition, thus you receive the full warranty. Technical Data - Center height: 230 mm - Turning diameter: 455 mm (up to 800 mm with optional outboard turning device!) - Center distance: approx. 955 mm in the SPECIAL MODEL STRATOS FU-230 LV (further extendable with optional bed extension!) - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) safety groove* - Headstock and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 1.5 kW / 2 HP (230 V connection) - Weight SPECIAL MODEL LV: 195 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 105.00 incl. VAT Germany: € 125.00 incl. VAT South Tyrol: € 150.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so that we can process your enquiry professionally! Pgjdpfx Ajtpxw Aokfjk Thank you, your NEUREITER team Related terms: wood lathe, lathe, turning machine, woodturning, turning, turning tools, woodturning, machine Reference: R-A0117

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Pedoyvfhdspfx Akfjgk Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 490 mm, turning diameter: 370 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 490 mm, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,745 mm, total length: 2,200 mm, total width: 1,720 mm, overall weight: 4,200 kg, spindle nose: JIS A2-6" (DIN 55021-6), Equipment: rotational speed infinitely variable, The machine is still in good condition and comes very well equipped with tooling! Pgedpfey Eywtex Akfok Additional options & accessories: - Super-precision version with Turcite on the guideways of both axes, minimum input is 0.0001 mm in diameter and length. - Tool measuring arm - A large amount of tooling such as turning tools, 3-jaw chucks, soft jaws, etc. Weight & dimensions: approx. 4,200 kg 2,200 x 1,720 x 1,745 mm (LxWxH)

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition, with the possibility of testing after prior agreement. Spindle drilling through the draw tube: 103 mm, chuck diameter: 315 mm, clamping: 100 mm, Samsys Multi 3000 bar feeder, workpiece remover, chip conveyor, tailstock (unused, deactivated), 12-tool turret head, Maximum swing diameter: 17.0″, Maximum turning length: 26.2″, Maximum bar capacity: 3.0″, Swing over bed: 30.0″, X-axis travel: 11.3″, Z-axis travel: 34.0″, Rapid traverse X-axis: 710 IPM, Rapid traverse Z-axis: 710 IPM, Spindle nose: A2-6, Spindle bore: 3.50″, Spindle speed: 0 – 3400 rpm, Spindle motor: 30 HP, Turret capacity: 12 stations, Turret indexing time: 1 second. 2 units available. Precision: hundredths of a millimeter. Pgedpfsy Hi Drsx Akfsk

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm Pgodjtzf N Rjpfx Akfek -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Position sensor (W):Direct scale : Pjdpfx Asy A U I Iekfegk Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Software option II:Sister tool management

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:76 mm Subspindle: Technology:Motorspindle Pedpfx Akey A U Izofegk Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter over bed 570 mm turning diameter over slide rest 365 mm turning length 3000 mm weight of the machine ca. 5 t dimensions of the machine ca. 5,5 x 1,44 x 1,38 m Additional information Well-maintained lathe from the maintenance department. Working range: Pjdpfx Asy Ed T Sekfogk Swing diameter over bed 570 mm Swing diameter over cross slide 365 mm Swing diameter in bed recess 600 mm Length of bed recess in front of main spindle 160 mm Turning length 3000 mm Center height over flat surface 280 mm Bed width 360 mm Maximum workpiece weight without steady rest 500 kg Maximum workpiece weight with steady rest 630 kg Main spindle speeds 11.2 - 2240 rpm Drive power 15 kW Feeds 60 longitudinal feeds/revolution 0.063 - 56 mm 60 cross feeds/revolution 0.0315 - 28 mm Tapping 60 thread pitches 0.25 - 224 mm 60 thread counts 112 - 0.125 TPI Travels Cross slide 345 mm Top slide 125 mm Tailstock quill 190 mm Main spindle Spindle head DIN 55022 size 8 Camlock spindle head size 8 Spindle bore diameter 62 mm Spindle bore diameter at front bearing 100 mm Tailstock Quad diameter 80 mm Equipment and accessories: 3-axis digital readout 3-jaw chuck 4-jaw chuck RÖHM, 500 mm diameter mm Boring rod holder Center points Multifix tool holder with tool holders Steady rest Machine documentation

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Multiflex toolholder Spindle speeds: 33 - 2000 rpm Chip tray Pgedpex Eah Asfx Akfek Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Weight: 1180 kg Operating manual

Condition: used, Year of construction: 1966, . centre distance 3000 mm max. swing diameter 660 mm multifix ja steady 2 Stück weight of the machine ca. 5 t length 5,80 mm width 2 m height 1600 mm centre height ca 290 mm circulating through support 370mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Pjdpfx Ajh Uytqskfsgk Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: not inspected (used), Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0278, turning diameter over cross slide: 240 mm, turning diameter over bed slide: 400 mm, center height: 120 mm, spindle speed (max.): 2,000 rpm, bar passage: 53 mm, No reserve price – guaranteed sale to the highest bidder! Bidding commits you to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Psdpfoy D Sdiox Akfogk Swing diameter over bed: 400 mm Swing diameter over cross-slide: 240 mm Spindle speed: 45 - 2,000 rpm Spindle bore: 53 mm Centre distance: 1,000 mm Centre height over bed: 200 mm Centre height over cross-slide: 120 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 900 x 1,600 mm Machine weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Three-jaw chuck (diameter: 200 mm) + additional three-jaw chuck Toolholder Turning tools Indexable inserts External reference: 11

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t Pjdoh D Anaopfx Akfjgk +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Psdeft U Sajpfx Akfegk Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Working width: 1000mm Pjdpfx Akjd Sblmofjgk

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Pgsdpfoyrfgrox Akfjk Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder Pgodpfxoygxy Uj Akfok -Turning tools -Various tips -Technical documentation