Used Lathe Y Axis for sale (25,590)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % duty cycle) Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power X-axis: 220 mm Hnsdpfxozl Dvke Akrsu Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Hnedpfx Akoy R A N Ajreu Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2014, Spinner MVC1000 machining center, with 4.axis Year: 2014 Technical details: Travel X/Y/Z: 1000mm/500mm/570mm Table dimensions X/Y: 1200mm/500mm Max. workpiece weight: 800kg Distance from spindle nose to table: approx. 120-690mm Tool holder: SK40 Max. spindle speed: 10000rpm Tool magazine: 24 positions Hnjdpfx Aoz Rvixskrju Max. tool diameter: approx. 80mm Max. tool length: approx. 300mm Max. tool weight: approx. 7kg Rapid traverse X/Y: 24m/min Rapid traverse Z: 20m/min Control: Heidenhain TNC 620 Space requirements X/Y/Z: approx. 2700mm/2550mm/2770mm Machine weight: 5100kg Accessories/options: - 4.axis rotary table - Blum measuring system ( touch probe is missing ) - documentations - Swarf conveyor - Through spindle coolant - Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: new, The new Hans Schreiner stepless metal lathe with lead and feed spindle and face feed. Bed and gears hardened and ground. Main spindle, tapered roller bearings and wedge strips. Camlock mount C4, top slide rotatable 360°. Tailstock adjustment +/- 5 mm for taper turning, good cutting performance. Speed continuously adjustable using electronic speed control with digital speed display. Incl. three-bank chuck 160 mm and steady rest. The 2-axis digital display guarantees the highest precision when turning. Technical data: Centre height 140 mm Centre width 650 mm Max. turning diameter 280 mm Spindle bore 38 mm Spindle cone MK 5 Tailstock taper MK 3 Spindle speed 75 - 500 rpm and 300 to 2000 rpm Speeds 2 Main motor power 1.5 kW S6 Voltage 230 volts Weight 210 kg Standard equipment: 3-jaw American chuck 160 mm Hjdpfsvrv D Djx Akrsnu with interchangeable jaws for internal turning Centering point 2-axis digital display Optional equipment: Base frame with drawer

Year of construction: 2008, condition: good (used), functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm MACHINE DETAILS Hedpepgrzcofx Akrsnu weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB. Hnsdpfx Ajzrh Ecjkrju

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Hnjdpfx Aez N Splskrou Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. Hnedpfx Aez R I U Iekrsu I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 Hjdpfx Ajz S S Elskrjnu In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 Hodpfxjyw H Sze Akrsnu - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Oil Mist exhaust system Documentation 1-fold in English + CD Machine option package Minimum quantity lubrication system High pressure cooling through spindle Hnjdezvuu Sepfx Akreu BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” CSE Siemens simulation Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details faceplate diameter 2200 mm swing diameter 2500 mm turning height 1600 mm Control Siemens 840 D Additional information CNC Double-Column Vertical Turning Lathe In 2017, the machine was retrofitted by a specialized German company with a Siemens 840D CNC control system. It includes new drive and feed motors, as well as a new electrical cabinet. An inspection under power—with the machine running—is currently still possible. Equipment: Siemens 840D CNC control system Number of controlled axes: 4 linear axes and one C-axis for the faceplate Electronic handwheel Safety fencing 2 rams Left ram equipped with driven tool stations for drilling and milling Right ram for turning operations Faceplate with 4 clamping jaws Chip conveyor Hnedpsz S E N Defx Akrju

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request! Hnodjyxppropfx Akrsu

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Hnjdpfx Aoydaadekrsu Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: excellent (used), functionality: fully functional, controller manufacturer: Haas, Equipment: documentation/manual, 3-Axis Machining Center Hjdpfx Akoz Sy I Ijrjnu Manufacturer: Haas Type: VF-1 / VCE-500 Year of manufacture: 09-1998 Control system: Haas (retrofit) Operating hours: unknown Serial number: 16XXX Technical data: ----- - Table size: 660 x 356 mm - Travel distances X-Y-Z: 508 x 406 x 508 mm - Spindle: max. 7,500 rpm - Spindle power: 11 kW - Tool holder: SK40 - Tool magazine with 20 stations - Coolant system - Programmable coolant nozzle - Chip conveyor - Footprint (L x W x H): 2.60 x 2.30 x 2.50 m - Weight: approx. 3.2 t Accessories: ----- - Documentation - SK-40 holder set Special features: ----- - Retrofitted with a newer Haas M17.04B control system! - In top condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. Hodjxdmgvjpfx Akrjnu The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) Hnedpfx Akoz Slpxoreu • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. Hnedpfou Itk Rox Akreu The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, Number of controlled axes: 4, digital Axis X travel (longitudinal): 6500 mm Axis Y travel (transversal): 1095 mm Axis Z travel (vertical): 800 mm Axis A rotation (vertical rotation): 0° to 180°, continuous Maximum axis X speed: 80 m/min Maximum axis Y, Z speed: 64 m/min Maximum axis A speed: 10,000 °/min Electric spindle power in S1: 7.5 kW, 20,000 Maximum electric spindle speed with standard HSK-F Configurable, independent work areas on the axis 9-position tool changer Jaw positioning Number of standard stops: 4 Hedszczwuopfx Akronu

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M301809, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 780 mm # Distance between spindle noses: min. 250mm/max. 1100mm # X1/X2 axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2 axis travel: 780 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/- 60 mm / Rapid traverse Y: 30 m/min # B-axis travel (Right Spindle): 850 mm / Rapid traverse B: 30 m/min Spindles # Spindle DIN 55026: Size A26 Hjdpfx Akoxxv A Aerjnu # Max speed: Left 4,500 rpm / Right 4,500 rpm # Power with 100% ED: Left – 15 kW / Right – 15 kW # Main spindle feature: Optional dual-stage clamping cycle # Bar capacity: Left spindle - 80 mm / Right spindle - 80 mm Tool Holder with Driven Tools # Tool interface: BMT55 # Number of positions: 12-station disc turret, all positions driven # Max speed: 3,600 rpm, Milling drive power: 5.5 kW Electrical Equipment # Operating voltage: 400V 3-phase, fuse 217A GL # Connected load: 71.9 kVA Dimensions # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm # Weight: 14,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and straightforward loading/unloading # CNC Control: Fanuc 18i-TB 2CPU, 2-channel control # Upgraded hydraulic unit: Hazabal S.L. GH1018/008 # Chip conveyor # Bar feeder interface # Automation interface available # Documentation: Electronic and hard copy available Machine status: Operational (in production)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100372005, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 465 mm, feed length X-axis: 40,000 mm, feed length Y-axis: 40,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, mount diameter: 63 mm, total length: 5,350 mm, table length: 500 mm, table width: 450 mm, total width: 5,116 mm, spindle speed (max.): 16,000 rpm, total height: 3,082 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, table load: 250 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 250 kg, torque: 63 Nm, rotational speed (max.): 16,000 rpm, overall weight: 16,000 kg, working range: 500 mm, tool weight: 6 g, input voltage: 400 V, input frequency: 50 Hz, input current: 90 A, workpiece length (max.): 700 mm, workpiece width (max.): 400 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, rotational speed infinitely variable, Zero hours HAMUEL HSTM 500 HD 5-Axis Turn-Milling Center Was not used in production / just commissioning (by OEM) and preserved. Comes as complete shipset from MFG. - X, Y, Z axis with absolute linear scale - A axis - Swivel axis / B axis - C axis - Pressure control of head clamping - CNC-control system SIEMENS 840D SL - Remote diagnosis system via Ethernet - Patrol light - Control cabinet with air-condition - Milling spindle 16’000 rpm, HSK-A63 - Machining hour counter - Tool handling system with double gripper - Chill unit - Hydraulic unit - Machine housing with front door L shape - Standard machine color scheme - Coolant supply unit, low pressure, paper belt filter - Flush Gun - Chip conveyor - Oil Mist exhaust system - Documentation 1-fold in English + CD Hnjdpfszvulkjx Akrou Machine option package: High pressure cooling through spindle BEMA automatically adjustable nozzles Tool measuring system BLUM Work piece measuring system BLUM Rotoclear window Handweel HT2 VNCK Siemens simulation Available in Bangkok, Thailand Worldwide shipping

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III Very good condition, only 6000 operating hours TECHNICAL SPECIFICATIONS: Year of manufacture: 2015 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate, axis X1: 24,000 mm/min Rapid traverse rate, axis X2: 24,000 mm/min Rapid traverse rate, axis Z1: 32,000 mm/min Rapid traverse rate, axis Z2: 32,000 mm/min Rapid traverse rate, axis Y1: 15,000 mm/min Rapid traverse rate, axis Y2: 15,000 mm/min Max. bar diameter: 20 mm Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm Resolution of axis C: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm Resolution of counter-spindle axis C: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool head: 8 Hodezp D Uuopfx Akrenu Number of positions in the turret 1: 5 Number of driven positions in the turret 1: 3 Speed of driven tools in the turret 1: 8,000 rpm Number of secondary machining positions: 8 Number of driven secondary machining positions: 4 Speed of driven tools in secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M232102, Technical characteristics: Work Area # Maximum turning diameter: 250 mm # Maximum machining diameter: 250 mm # Maximum workpiece length: 555 mm # X1/X2-axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2-axis travel: 600 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/-41 mm / Rapid traverse: 30 m/min # B-axis travel (Right Spindle Travel): 620 mm / Rapid traverse: 30 m/min Main Spindle # Spindle according to DIN 55026: Size 6 # Maximum speed: Left 4500 rpm / Right 5000 rpm # Continuous power (100% duty cycle): Left 15 kW / Right 7.5 kW # Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Tool Holder with Driven Tools # Tool interface: BMT55 Hedpsxxvv Asfx Akrjnu # Number of positions: 12-station disc turret, all driven positions # Maximum speed: 6000 rpm, Milling motor power: 3.7 kW Electrical Equipment # Operating voltage: 200V, 3-phase, fuse 217A GL # Connected load: 75 KVA Dimensions # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm # Weight: 6,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and easy loading/unloading # CNC control: Fanuc 18i-T # Chip conveyor # Bar feeder interface # Documentation: Electronic not available / Book available Machine Status: NOT WORKING # Fault not specified. Complete electrical rewiring performed in 2018 and linear guides renewed.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Hedpez Rrbwsfx Akronu Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: M234205, Technical Specifications: Work Area - Maximum turning diameter: 250 mm - Maximum machining diameter: 250 mm - Maximum workpiece length: 555 mm - X1/X2-axis travel: 195 mm / X-axis rapid traverse: 30 m/min - Z1/Z2-axis travel: 600 mm / Z-axis rapid traverse: 30 m/min - Y-axis (Upper Turret) travel: ±41 mm / Y-axis rapid traverse: 30 m/min - B-axis travel (Right Spindle Travel): 620 mm / B-axis rapid traverse: 30 m/min Hjdpfx Asxxvw Hskrjnu Main Spindle - Spindle interface to DIN 55026: Size 6 - Max. speed: Left 4500 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: Left spindle - 65 mm / Right spindle - 51 mm Tool Carrier with Driven Tools - Tool interface: BMT55 - Number of stations: 12-station disc turret, all stations driven - Max. speed: 6000 rpm; Milling motor power: 3.7 kW Electrical Equipment - Operating voltage: 200V 3-phase, fuse 217A GL - Connected load: 75 kVA Dimensions - Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm - Weight: 6,000 kg Key Features and Capabilities: - Horizontal design: Optimized chip removal and easy loading/unloading - CNC control: Fanuc 18i-T - Chip conveyor - Bar feeder interface - Documentation: Electronic not available / Paper manual available Machine condition: NOT OPERATIONAL - B-axis not functional - Lower turret not functional