Used Lathe for sale (5,510)

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm Ksdeyv Eviepfx Abcoww turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Kwodjyv Eurjpfx Abcew Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Kwodsyv Eq Topfx Abcjw Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: excellent (used), Year of construction: 2007, Doosan Puma 300MC C-axis with driven tools, 360° (0.001°) Kwjdpfxeyrb Urs Abcow Year: 2007 Fanuc 21iTB with Manual Guide Chuck: 12 inch (315mm) Samchully Spindle bore: 102mm Max turning diameter: 355mm Axis travels: X - 250mm Z - 680mm Turret: BMT 65 Tailstock Tool probe Chip conveyor, coolant tank with pump Tool holders Machine documentation Condition: very good

Condition: good (used), Holzmann Copy Lathe DBK 1500 – Robust Professional Woodturning Machine For sale is a high-quality Holzmann DBK 1500 copy lathe in good used condition. This machine is ideal for the precise turning of series components such as table legs, railings, chair legs, or decorative wooden elements. Thanks to the integrated copying attachment, workpieces can be reproduced exactly based on templates – perfect for workshops, joineries, or ambitious hobby turners. Technical specifications (manufacturer information): - Distance between centers: approx. 1500 mm - Spindle speed settings: 500 / 1000 / 1950 / 2800 rpm - Sturdy, heavy-duty construction for low-vibration operation - Integrated copying attachment - Adjustable tool rest - Emergency stop switch - CE certified Kwsdpeyuub Dofx Abcjw Condition: - Used, fully functional - Normal signs of use present - Very stable and durable industrial machine Special features: - Serial production of turned parts - Solid steel construction - Ideal for table legs, spindles, columns, etc. The machine is located in A-5431 Kuchl and can be inspected during our opening hours. Subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, turning bench, woodturning, turning tools, wood turning, turning, machine

Condition: excellent (used), Year of construction: 2024, For sale is a high-quality MIDI PRO benchtop woodturning lathe in demonstration condition with minimal signs of use. The machine has been used only occasionally and is in excellent technical and visual condition. This compact yet extremely robust benchtop lathe is perfectly suited for bowls, boxes, small vases, and precise turning tasks. Thanks to the rotatable and adjustable headstock, it offers especially versatile applications and ergonomic operation. Ideal for passionate hobbyists as well as professional users seeking a powerful and space-saving woodturning lathe. Technical specifications: - Center height: approx. 178 mm (turning diameter approx. 355 mm over bed) - Distance between centers: approx. 450 mm (expandable) - Speed ranges: 60–1000 / 150–1900 / 350–3700 rpm - Motor: 1 HP / 0.7 kW – 230 V - Spindle thread: M33 x 3.5 (MT2) - Tailstock: MT2 with 100 mm quill travel - Forward and reverse operation Kwodpfjyuubqex Abcsw - Heavy-duty construction, machine weight approx. 67 kg Condition: - Demonstration machine - Hardly any signs of use - Technically flawless Advantages: - Very compact, stable benchtop lathe - Ideal for precise turning work - Versatile due to rotatable headstock - Perfect for hobby and professional workshops The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning machine, lathe, bench lathe, wood lathe, turning, turning tools, woodturning, machining, machine

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders - Bed stop - Chip tray Kwodpjydk Hhsfx Abcsw

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 140 mm, spindle bore: 45 mm, center width: 500 mm, Cycle lathe Manufacturer: Kern Model: CD 282 Year of manufacture: 2006 Technical Data Make: Kern Model: CD 282 Year: 2006 Control: Heidenhain Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 140 mm Spindle bore: 45 mm Speed range: 1–5000 rpm Drive power: 11.5 kW Dimensions: L 2.20 x W 1.60 x H 1.20 m Weight: approx. 1.6 t Accessories - Heidenhain control digital display - Clean Mist extraction unit, model CM 1400/2, year 2018 - Large range of accessories as per photos - 1 piece steady rest - 1 faceplate, ø500 mm Kodsyvugdepfx Abcjww - 4 Multifix holders, size C All information is supplied without liability. A live demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2023, X/Y/Z: 360/120/750 mm Bar capacity: 82 mm 12-station driven tool turret C-axis Y-axis VDI 40 NC tailstock MK 5 with foot switch Foot switch for clamping on main spindle Kwedpfjw Nxyaox Abcjw Air curtain Signal light Coolant device Chip conveyor Hydraulic holding brake ShopTurn Transmit function (cylindrical machining on outer and face surfaces) iXpanel (control system operation and organization extension) Gripper tray Small tool package

Condition: good (used), Year of construction: 2017, NC steady rest for shaft machining Y-axis: -60/+80 mm Kwedpfx Abjyizdhecjw Driven tools/C-axis for milling and drilling operations Tailstock BMT turret VDI 40 / 12 station Spindle bore: 106 mm Draw tube bore: 95 mm SIEMENS 840 D Diameter: 700 mm (27.56 in) Rotational speed: 2,500 rpm, 3,500 rpm (15,707.963 rad/min, 21,991.149 rad/min) Workpiece length: 1,300 mm (51 in) Max. turning diameter: 500 mm (20 in) Bar capacity: 95 mm (4 in) X-travel: 318 mm (13 in) Z-travel: 1,360 mm (54 in) Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Rated power: 33 kW, 42 kW (44.9 hp, 57.1 hp) Max. torque: 800 Nm, 1,040 Nm (590 ft.lb, 767 ft.lb) Coolant capacity: 350 l (92 gal) Overall length: 6,511 mm (256 in) Overall width: 2,249 mm (89 in) Overall height: 2,150 mm (85 in) Weight: 11,000 kg (24,251 lb)

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 Kedpfer D Nmyjx Abceww - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: used, Year of construction: 1990, turning length / mm control / centre height / mm CNC Turning Center MAZAK MULTIPLEX 420 Kodpsyvkw Eefx Abceww For sale: CNC turning center Mazak MULTIPLEX 420 with 2 spindles and 2 turrets. Ideal for series production and complete machining. Accessories: Comes with a large set of accessories (see pictures). Machine in good condition. Inspection possible by appointment. Feel free to get in touch if interested.

Condition: used, Year of construction: 1995, turning length / mm control / centre height / mm Kwedpfx Aeyvkv Isbcsw MAZAK MULTIPLEX 620 MARK II CNC turning and milling center including FLEX-GL100N portal loader with two spindles and two turrets

Condition: used, Year of construction: 2024, controller manufacturer: Heidenhain, controller model: ND 7013, _____ Description: Year of manuf. : 2024 Control : Heidenhain ND 7013 Spindle bores : 71 mm Turning diam. : 345 mm Turning length : 1500 mm Kodpfoyu Iliox Abcjww Technical data Center height :260 mm Swing diameter over bed :535 mm Swing diameter over facing slide :345 mm Center width :1.500 mm Spindle head :DIN 55027/DIN ISO 702-3 size 6 Spindle bore :71 mm Spindle diameter in front bearing :100 mm Drive power :7.5 kW Speed range :33 - 1,500 min-1 Metric thread :0.5 - 28 mm Quill diameter :65 mm Quill stroke :120 mm Internal taper :DIN 228 MK 4 Standard equipment :- Roller conveyor cover for leading and traction spindle :- Chip guard rear panel :- Chuck guard with limit switch monitoring :- Chip deflector :- Longitudinal stop with micrometer screw :- Change wheel door with limit switch monitoring :- Braking device for the main drive :- Starting clutch :- LED machine light in the chip guard rear panel :- Multi Suisse size B quick-change steel holder :- incl. 1 BD 25120 quick-change holder :- Coolant device incl. coolant pump 30 l/min. at 0.2 bar :- Tapered sleeve MK5 for the main spindle :- Fixed center point MK5 :- Central lubrication :- Tropical insulation up to max. 45° air temperature and max. 80% relative humidity :- Oil pusher press :- Set of operating keys :- Documentation Additional equipment :- Set of installation plates, 8 pieces :- Num. Position indicator mounted on : Support arm above headstock :- Packaging

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point Kodpew Uf Hwofx Abcoww - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Kwjdpfx Abeyg Rfiocjw Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, Meuser lathe type KM 1-45481 Centre height: 185 mm Centre distance: 1000 mm Spindle speed: 200-2000 rpm Swing over bed: 105 mm 3-jaw chuck Multifix B tool holder with insert Kjdeyv Eg Ujpfx Abcoww Live center

Condition: excellent (used), Year of construction: 2004, Please read the technical specifications thoroughly. If you are considering this machine as a potential investment, we kindly request your complete credentials with an accurate telephone number and email address in order to submit an offer. We are offering an exceptionally high-quality precision lathe. In its class, this is arguably the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, incl. CE certificate and central lubrication Machine no.: T1022.2027-00 Centre height: 240 mm Swing over bed: 500 mm Swing over cross slide: 285 mm Centre distance: approx. 1,200 mm Turning length (effective): approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 size 6 Spindle diameter: 100 mm Drive power: 11 kW Max. torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill travel: 190 mm Tailstock taper: MK 5 Space requirement: approx. 4,000 x 1,525 mm (L x W) Weight: approx. 4,300 kg Accessories included: - 3-axis digital readout HEIDENHAIN - Central lubrication - Electrically interlocked chuck guard - Coolant system - Chip protection rear wall - Röhm lathe chuck T 250 mm incl. various clamping jaws - Telescopic cover for leadscrew and support to bed - Machine lamp - Multifix C tool post + 4 holders - Live centre - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slide Kodpew Rdthofx Abcjww Condition: The machine is in very good technical and visual condition. Backlash in cross slide: approx. 0.3 mm, top slide: approx. 0.15 mm Spindle nose runout: approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over 750 mm of bed length (measured on flat guideway with dial indicator towards the chuck) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for engagement lever replaced - Locking pin for engagement interlock replaced Net price EXW. Delivery with our own truck can be offered for an additional charge.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fanuc =i-TD control, 5-axis Swiss-type lathe, main and sub spindle, double C-axis, Y-axis, spindle speed 10,000 rpm, chip conveyor, Iemca Boss 338 bar feeder, SFB-300eco high-pressure unit, immediately available Kwodpfxoyv E Ape Abcjw

Condition: ready for operation (used), Year of construction: 2009, Seiger SLZ 1000 cycle lathe year of construction 2009 center distance 3000mm Circulation over bed 1010 Circulation over facing slide 650 Drive at 100% ED 37KW at 60/ ED 52KW max. torque approx. 9000NM Kodpfxeu T Dryj Abcsww Speed 5-900rpm X Feed force max 240000N Z feed force max 16000N Control Heidenhain Manual Turn with faceplate and steady rest The offer is aimed exclusively at traders within the meaning of §14 BGB

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: PM301222, turning length: 648 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 282 mm, travel distance Z-axis: 1,330 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, quill travel distance: 100 mm, quill diameter: 100 mm, overall weight: 5,000 kg, spindle nose: A2-8, bar diameter (max.): 77 mm, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, documentation/manual, DAEWOO PUMA 300 B CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 10.499 A - Connection: 40.01 kVA Kwjdpoyvru Ssfx Abcsw - Swing diameter over bed: 570 mm - Swing diameter over carriage: 370 mm - Recommended machining diameter: 255 mm - Max. machining diameter: 400 mm - Max. working length: 648 mm - Bar capacity: 77 mm - Chuck diameter: 255 mm - Front spindle bearing diameter: 130 mm The machine is equipped with a tailstock, a 10-station turret, as well as a three-jaw chuck from SMW AUTOBLOK, diameter: 260 mm, and a chip conveyor. Attention: The item must be collected on a binding date, to be arranged, between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded onto truck.

Condition: good (used), functionality: fully functional, machine/vehicle number: M232302, turning length: 435 mm, turning diameter: 250 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 5,000 kg, bar passage: 52 mm, spindle nose: A2-5, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, rotational speed infinitely variable, NAKAMURA TOME WT-250 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 225 A - Connection: 62 kVA - Swing diameter over bed: 250 mm - Swing diameter over carriage: 250 mm - Standard turning diameter: 100 mm - Max. bar capacity: 51 mm - Chuck size: 6 inch - Front spindle bearing diameter: 90 mm Kwsdpfxsyvrtho Abcew - Tailstock travel: 620 mm - Tailstock rapid traverse: 24 m/min - Ball screw diameter: 32 mm - Ball screw pitch: diameter 12 mm - Distance between spindle noses: min. 250 mm, max. 870 mm - Positioning accuracy of feed axes: 0.05 mm The machine is equipped with a sub-spindle, HAINBUCH clamping system, a main spindle with HAINBUCH clamping system, a twin turret with the tool holders as shown on the turret, as well as a bar feeder from KUPA, model LM92P, along with chip conveyor and transformer. Attention: The item must be collected between 12.05. and 22.05.2026, with the exact date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 324, turning length: 525 mm, turning diameter: 160 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 222 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, quill travel distance: 80 mm, quill diameter: 75 mm, overall weight: 5,000 kg, swing diameter over bed slide: 450 mm, swing diameter over top slide: 300 mm, controller manufacturer: MORI SEIKI, controller model: MORIC-T5F, Equipment: chip conveyor, documentation/manual, MORI SEIKI SL-15 M CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Connection: 20 kVA - Swing diameter over bed: 450 mm - Swing diameter over turret slide: 300 mm - Distance between centers: 595 mm - Standard diameter: 160 mm - Front bearing inner diameter: 90 mm - Number of tools: 12, max. 6 stations for driven tools - Tool shank cross-section: 20 mm - Max. boring bar shank diameter: 32 mm - Driven tool spindle speed: 100 – 2000 rpm - Feed rate on X-axis: 0.00001 to 250 mm/min; Z-axis: 0.00001 to 350 mm/min - Rapid traverse speed X and Z axis: 1260 mm - Tailstock travel: 450 mm The machine is equipped with a tailstock, a 12-station tool turret (including the tool holders shown in the photos), and a chip conveyor. Kedpfx Abjyvq Nuocsww Note: This item must be collected between 12.05. and 22.05.2026 on a specific date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz Kwsdpfsyvql Nox Abcsw - Connection: 10 kVA - Rated current: 25 A - Centre distance: approx. 750 mm - Centre height over bed: 190 mm - Swing over bed: 380 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool holder, as well as a HAINBUCH clamping system, diameter: 140 mm, and a two-axis digital readout by DMG MORI. Please note: The item must be collected firmly between 12/05 and 22/05/2026 at an exact date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control Kodeyvfvuopfx Abcoww High reliability and low maintenance Control: FANUC CNC