Used Lawn Rollers for sale (8,731)

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) Hfsdpfxjzxgf Ue Aftel EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting Hjdjzx Anxepfx Aftsfl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Hfjdpfxezx Eaqo Aftol Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: excellent (used), Year of construction: 2022, operating hours: 27 h, functionality: fully functional, machine/vehicle number: GZC750, overall weight: 415 kg, fuel type: gasoline, color: orange, axle configuration: 2 axles, operation weight: 480 kg, empty load weight: 415 kg, gearing type: mechanical, loading space volume: 1.5 m³, loading space width: 820 mm, loading space length: 2,000 mm, loading space height: 1,150 mm, We are selling almost brand new lawn seeding combi, with 27 work hours. The ELIET GZC 750 seeder is another trustworthy partner in the sowing of new turf. The GZC 750 lawn seeder offer professionals the chance to have various operations combined in one machine and thus effortlessly sow complex lawns quickly and at a high standard ensuring a substantial saving of time and money. Features include: Hydrostatistically Driven Rollers – The operator can enjoy the incredible comfort of a proportionally adjustable hydrostat. Declutching is unnecessary: he can smoothly adjust the speed at any moment. Large Hopper – The hopper has a capacity of 61 litres Slip Coupling – A larger stone may accidentally become stuck between the vibrating harrow and the rear roller. To avoid that this jam causes the drive to break, it is protected by means of a slip coupling. Machine-wide Rolling – The ELIET lawnseeder has two crusher rollers in front and a machine wide one at the rear. This provides a good weight spread and evenly flattened soil overall. Sturdy Construction – It is essential that the machine’s own weight be substantial in order for the machine to function properly Sideways Adjustable HandleBars Vibrating Harrow Depth Setting – The lever to set the depth of the harrow action. The operator can continuously adjust the harrow’s depth setting Hjdpfxsz Aivkj Aftefl Vibrating Harrow – The vibrating harrow consists of two rows of teeth that penetrate the ground to a maximum depth of 7 cm (2,7 inch)

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Hedpfx Afsy Nc H Eetefl

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Hfsdpozxch Ejfx Aftol Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 99.125.681, working width: 1,100 mm, overall weight: 2,500 kg, grinding belt length: 1,890 mm, grinding belt width: 1,110 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 2 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,110 mm Roller diameter: 175 mm Roller material: Rubber Motor power: 18.5 kW Max. working width: 1,100 mm Min. working height: 30 mm Max. working height: 183 mm Infeed table length: 400 mm Outfeed table length: 250 mm MACHINE DETAILS Feed motor power: 0.75 kW Voltage: 380 V Current consumption: 36 A Fusing: 63 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 1,800 x 2,320 mm Unladen weight: 2,500 kg Number of transport packages: 1 Hfodpfx Aezxcmzsftol EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Hsdpfezxchlsx Aftsfl Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: good (used), Year of construction: 2014, Over 4,000 m of conveying system technology, TGW, nominal width (NB) mostly 470 mm and also 620 mm – used. Price ex works (net): only €525,000, disassembled, packed, and loaded, including feet, etc.! Price for larger portions available upon request! Manufacturer: TGW Year of manufacture: 2014 Components, e.g.: BFT2000 KRF curved roller conveyor BFT2000 ZKRF infeed/outfeed curved roller conveyor BFT2000 RFM roller conveyor multi BFT2000 GF belt conveyor BFT2000 ART all-round roller table Internal chute BFT2000 RB roller track BFT2000 PAS pop-up sorter Hedezbyb Aepfx Aftsfl BFT2000 ZAS timing belt infeed/outfeed module BFT2000 KUS chain transfer unit Some Transnorm belt curves, 180 degrees, approx. 6-7 pieces with a relatively small radius Optionally including 2 lifters Sale without control system (light barriers, sensors, scanners, control cabinets, etc.), but these are available for an additional charge! Condition: good Available: from Q4 2026 Location: Hamburg P.S. Upon request, we will gladly send you the 396-page product list or a shorter AI summary!

Condition: used, Year of construction: 1980, Used vehicle Hjdpfxjzzhglo Aftefl Vehicle no. 3401, Fiat-Allis FL10B tracked excavator, year of manufacture approx. 1980, 2.100 bucket with teeth, 400mm steel tracks, cabin, protective grille. For inquiries, please contact or 1787043227. Errors and prior sale excepted.

Condition: good (used), functionality: fully functional, power: 70 kW (95.17 HP), fuel type: diesel, color: white, empty load weight: 13,400 kg, Year of construction: 1999, operating hours: 7,540 h, Equipment: cabin, Cat CB-535B roller, year 1999 with 7,540 operating hours, weight 13,400 kg, immediately ready for use, transport and delivery possible, we also prepare customs/export documents, inspection by appointment also possible on weekends. Hfjdpfx Ajyuzpnoftjl

Condition: used, Year of construction: 2015, machine/vehicle number: 315031/02, working width: 1,800 mm, workpiece length (max.): 3,000 mm, workpiece height (max.): 25 mm, TECHNICAL DETAILS Hedpozypm Djfx Aftefl Workpiece dimensions Maximum length: 3,000 mm Minimum length: 400 mm Maximum width: 1,800 mm Minimum width: 200 mm Maximum thickness: 25 mm Minimum thickness: 3 mm Maximum deflection: 1 mm Maximum paper roll diameter: 500 mm Paper web width: 1,980 mm Maximum working width: 1,800 mm MACHINE DETAILS Minimum temperature: -5 °C Operating speed: 0.8–2 m/min Voltage: 400 V Frequency: 50 Hz Pressure: max. 6 bar EQUIPMENT Roller conveyor TVR18/2000 Working width: 1,800 mm Speed: 0.35–6.1 m/min Roller diameter: 66 mm Roller spacing: 125 mm

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Hfjdpez Agvhsfx Aftjl Maximum element height: 100 mm Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, empty load weight: 1,720 kg, operating speed: 10,700 mm/s, roller width: 2,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rigid material Workpiece height: max. 50.8 mm Workpiece weight: max. 34 kg/m² Roller material Width: min. 900 mm – max. 2,200 mm Weight: max. 50 kg Diameter: max. 240 mm Maximum printing speed: 64.2 m²/h (in express mode) MACHINE DETAILS Dimensions & weight Dimensions: 3,080 × 2,500 mm Weight: 1,720 kg EQUIPMENT RIP (see images) Hsdpfxjzxgnve Aftofl Note: The machine heads need to be replaced. The seller can offer a complete service for this.

Condition: used, machine/vehicle number: 101582201049, Year of construction: 2004, color: other, operating hours: 4,350 h, Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. Hsdpfx Aozblb Uoftefl

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, total width: 750 mm, total height: 1,300 mm, total length: 450 mm, working width: 2,400 mm, Device description working width 240mm maximum workpiece height 100mm motor power 0.18 kW year of manufacture 1999 manual adjustment of roller spacing overall width 75 cm overall length 45 cm Hfjdszxpviepfx Aftol overall height 130 cm

Condition: good (used), Year of construction: 2003, functionality: fully functional, Internal article number: 26081 Metal circular saw BIMAX TA 91-250 Year of manufacture: 2003 + Roller conveyor 2550mm + Coolant pump + Various saw blades + Operating manual / Electrical wiring diagram Control: Siemens Simatic OP7 Dimensions (L x W x H): 130 x 110 x 195cm Weight: approx. 1000 kg Hjdpfx Afozxgvastefl Dimensions of roller conveyor: 260 x 70 x 105cm The machine is fully functional and can be inspected while powered on, by arrangement, in our heated warehouse covering an area of over 500 m².

Condition: used, Year of construction: 2007, operating hours: 2,202 h, Equipment: ABS, all wheel drive, * CAT CS - 563 E Soil Compactor * Year of manufacture: 2007 Hjdpfezwz Axjx Aftefl * Original: 2,200 operating hours * Weight: 12,000 kg * 6-cylinder CAT engine * 107 kW engine * Air conditioning * More pictures and videos available via WhatsApp * Information subject to change without notice and prior sale.

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Hodpey Ekncofx Aftefl Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Hsdpozww R Sofx Aftefl

Condition: used, color: other, Year of construction: 2007, operating hours: 6,500 h, GVW: 12.700 kg Make of engine: Duetz CE mark: yes Serial number: 101582511260 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   Hsdpfx Asy R Uwrjftsfl We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, Year of construction: 2020, operating hours: 2,400 h, * Hamm HD12 i VT combination roller * Year 2020 * 2400 operating hours Hedpjz Am H Tsfx Aftsfl * NEW MODEL * 24 kW Kubota engine type D1803-CR * 2400-3320 kg * Edge cutter wheel * 120 cm working width

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 0397 00 64, total width: 630 mm, total length: 1,000 mm, total height: 1,500 mm, year of last overhaul: 2026, warranty duration: 6 months, type of input current: three-phase, Merand CFS vertical dough sheeter A machine for rolling and shaping dough pieces. Dough piece weight: from 50 to 1450 grams. Capacity: up to 1500 dough pieces per hour, depending on the weight of the elongated dough piece. Dimensions (width x depth x height): 1000mm x 630mm x 1500mm. Two levers for adjusting the rolling and elongation, High precision adjustment, Consistent adjustment over time, Hsdpsz Ati Ijfx Aftefl Dough pieces are stretched between 2 counter-rotating belts to enable a gentle but effective elongation method, Efficient and simple belt replacement (approx. 25 minutes), quick cleaning and maintenance, Motor speed: 880/min at 50 Hz, Length of the extended receiving belt: 830 mm. Warranty: 6 months warranty on parts – worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 3,704 h, machine/vehicle number: 32855, USED SAKAI TIRE ROLLER Hfedpfx Ajzx Nw Hoftsl MODEL : T2 SERIAL :32855 YEAR : 2001 HOUR 3704

Condition: used, BMH side discharge roller table Length: 500 cm Width: 200 mm Pneumatic side discharge for material. Hsdpfx Aoz Ai Nkjftjfl