Used Lenze En 60034 for sale (167)

Condition: good (used), Variator pulley, variable speed pulley, variable belt pulley, PIV transmission, variable speed transmission, variable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley -Manufacturer: Lenze, Vario belt pulley with compression spring -Outer diameter of pulley: 130 mm -Inner diameter of the opening: 18 mm -Quantity: 1x pulley available -Price: per piece Dodpfxjwz U U Ee Aptscl -Dimensions: Ø130 x 95 mm -Weight: 1.2 kg/pc.

Condition: good (used), Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm Dsdpfoq Syt Eox Aptecl -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg

Condition: used, Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, spur geared motor -Gear: Type GS TO4-2 B VCK 071-32 -Speed: 44 rpm / Torque: 79 Nm -Engine: Type SKhR 71-4B/1561 Dcsdpfxoq Syuus Aptsl -Power: 0.37 kW / 1380 rpm -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 375/200/H165 mm -Weight: 13 kg/pc.

Condition: ready for operation (used), Lenze AC 7800 servo drive, used, with normal signs of wear, 100% functional. Dsdpfx Apei Ebx Aetecl

Condition: ready for operation (used), Lenze PM 13.171.52.3.2.9 servo motor with gearbox, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dcedpfx Aei D I Hksptsl

Condition: good (used), Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot Dsdpfedntf Hex Aptecl -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Lenze, series 8600 Dcodpofuw Ntefx Aptel -Type: 8603_E.2D.20 -Input: D 400 -Output: 0-400 V/5.5 A -Dimensions: 330/200/H175 mm -Weight: 6.1 kg

Condition: good (used), Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A Dedjh Rn U Tjpfx Aptocl -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.

Condition: good (used), End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver Dcedpex H Ip Hjfx Aptjl -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Condition: used, Straightening machine, strip straightener with adjustable geared motor LENZE Straightening machine, strip tensioner used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, infinitely variable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 Motor power: 0.37 kW Mains connection: 380 volts, 50 Hz - Traction roller pair, drive of the lower rubberized roller via open gear drive - Speed control via infinitely variable speed adjustment using a handwheel on the geared motor - Upper part of the straightening rollers mechanically adjustable - Straightening unit with 3 rollers, one of the rollers is missing (rollers of the straightening unit are not driven) - On a stable metal base - Straightening machine used for cardboard approx. 350 x 1.5 mm Dcedpfx Apedzp U Aotsl Space requirement L x W x H: 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Condition: ready for operation (used), Lenze 9225_E.3A.30 servo drive, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of supply as shown in the photos. Dcsdpfx Aei Ebxxjptsl

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 Dcodpfex H Iw Dox Aptol -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg

Condition: good (used), Braking resistor, charging resistor, damping resistor, filter resistor -Lenze: Brake resistor ERBS047R400W -Resistance: 47 Ohm/400W/800V -Dimensions: 480/110/H125 mm -Weight: 2.6 kg Dedpfefkza Tox Aptscl

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV Lenze, clamping cylinder stroke 20 mm -Type: 40 TGL 30-7312 Dcsdpfjwzh R Tjx Aptol -Shaft Ø 25 mm -Number: 8x clamping cylinders available -Price: per piece -Dimensions: Ø 70 x 133 mm -Weight: 2.8 kg/piece

Condition: used, variable speed geared motor, variable speed geared motor, electric motor -Manufacturer Lenze type adjusting gear: 11.605.03.16.0 -Manufacturer gearbox Lenze type: -Manufacturer Motor Hanning type: 7A8-271 -Motor power: 0.18 kW -Speed range: 0.8-4.6 rpm -Motor: adjustable -Drive shaft: Ø 40 mm -Construction: B3 -Number: 1 piece motors available -Price per piece -Dimensions: 680/245/H300 mm -Weight: 53kg Djdoit Uhtepfx Aptscl

Condition: used, Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal, Interbus S -Manufacturer: Lenze, Interbus S Module Bus Drive -Type: 33.2111IB -Number: 11x module available -Price per piece -Dimensions: 75/45/H60 mm Dsdpfehzvwxox Aptscl -Weight: 0.1 kg/pc.

Condition: good (used), Mains filter for frequency converters, PLC control, mains filter, mains filter Dcedpfx Apjfkza Setjl -Lenze: Mains filter E94AZMS0094 -Dimensions: 530/100/H70 mm -Weight: 6.1 kg

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Dedpfxsvvt U Ie Aptecl -Manufacturer: Lenze ABW, thread cutting chuck MK2 -Type: GB2a -Dimensions: Ø 62 x 207 mm -Weight: 1.2 kg

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WV Lenze, clamping cylinder stroke 25 mm -Type: 63 TGL 30-7312 -Shaft Ø 32 mm -Number: 4x clamping cylinders available -Price: per piece Dodpfx Apowzia Aotocl -Dimensions: Ø 90 x 160 mm -Weight: 5.2 kg/piece

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: 9114 B -Input: 3-phase 220 V 50/60 Hz -Output: 3-phase 0-120 V 4.2/10.7 A Dcsdpfx Apednffrjtel -Dimensions: 345/115/H300 mm -Weight: 6 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Gearbox Lenze type 52.308.06.10 PGLP680 -Engine: away type AL90S/L-4 -Power: 1.5 kW 139 rpm -Speed speed: 139 rpm -Design: B5 angle -Shaft: Ø 28 x 70 mm -External fan: 0.05 kW wistro type A2E170 -Protection rating: IP55 -Quantity: 1 piece -Dimensions: 580/230/H245 mm Djdsfibh Nepfx Aptocl -Weight: 40kg

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus Dedpfxevvub As Aptscl -Manufacturer: Lenze ABW, tapping chuck MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 265 mm -Weight: 3.7 kg

Condition: used, face driver, face driver, face driver, driver tip, face driver, face driver Dsdpfjtxku Ijx Aptecl -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg

Condition: used, Gear motor, electric motor, electric gear motor, gear motor with frequency converter -Manufacturer: Lenze, geared motor type GST05-3E VBR 063C12 with frequency converter -Speed: approx. 8 rpm i= 179.067 -Engine: Lenze MDEMA1M063-12 -Power: 0.12kW / 1425 rpm -Frequency converter: E82MV371_2B001 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Total dimensions: 500/250/H195 mm -Weight: 20kg Djdpfxoh Hbxfj Aptocl

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Lenze, geared motor with rotary encoder -Speed: approx. 75 rpm i= 31.738 -Motor: Lenze MDXMA1M 071-12 -Encoder: Hengstler 0 525 498 -Power: 0.25 kW / 1400 rpm -Protection class: IP55 -Brake: 4 Nm Dcjdpjh Eci Iofx Aptel -Number: 2x gear motor available -Price per piece -Total dimensions: 445/330/H180 mm -Weight: 20 kg