Used Lime for sale (321)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling Ijdpfx Ajwir A Njdwsal - Substructure with stiffeners

Condition: used, Year of construction: 2017, Overview The ALWID-SUPERIOR-16D/4SK filling machine was built in 2017 by the German manufacturer ALWID. The machine was used by a Company producing sauces in Germany. After bankruptcy, BEVMAQ took over the machine and stored it. The filler is a piston filler that can fill volumes of 0.1-1.0 l into containers made of plastic or glass. The volume to be filled can be easily adjusted. The cap is pressed on. An extension to a screw capper is possible. In addition to sauces, the machine can also be used for dressing, spirits or mayonnaise. The below-surface filling can also be used to fill products that tend to foam. Technical Details Capacity: 6,000 bottles per hour with 250ml bottle volume A test showed that mayonnaise can still be filled to 500ml at 6,000 bottles per hour Working Direction: Left - Right Number of filling stations: 16 Number of closing elements: 4 Siemens control Below surface filling Lowering and raising the filling pipe during the filling process Scope of delivery: Filler Capper Cap sorting unit Cap alimentation Iaedpfxswwq Sfs Adwol

Condition: good (used), Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Iaedpsw D E Unofx Adwel Model: LIGNA 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s Iaedefxygwspfx Adwsl servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: excellent (used), Year of construction: 2007, Gleason Pfauter G130H CNC vertical gear hobbing machine Control, Siemens 840D Year of manufacture, 2007 Capacity Maximum workpiece diameter, about 130 millimetres Maximum gear width, about 170 to 180 millimetres Maximum module, up to module 3 or 4 depending on the configuration Minimum module, about module 0 point 5 Hob head Hob spindle power, about 11 point 5 to 14 kilowatt Hob speed range, about 10 to 4000 revolutions per minute Hob head swivel, about plus and minus forty five degrees Maximum hob diameter, about 100 millimetres Maximum hob length, about 240 to 317 millimetres Hob shift travel, about 170 to 220 millimetres Ijdpfexxzqljx Adweal Axis travels X axis travel, about 200 millimetres Y axis travel, about 170 millimetres Z axis axial slide travel, about 250 to 350 millimetres Work spindle and table Work spindle speed, about 0 to 1000 revolutions per minute Table diameter, about 160 to 168 millimetres Table bore, about 65 millimetres Maximum clamping length, about 245 millimetres Hydraulic clamping included in most units Process Wet cutting External gear hobbing Two cut cycles and taper or crown hobbing possible ISO thirty hob arbor Optional automatic loading systems Electrical and general Machine weight 11 tons Overall footprint, roughly three metres by three metres with guarding

Condition: new, Year of construction: 2025, functionality: fully functional, color: other, Equipment: cabin, hydraulics, CONSTMACH JS-1 mobile jaw and impact crusher is a high-efficiency mobile crushing and screening plant designed for processing natural stones such as medium-hard limestone, dolomite, and river stone. The JS-1 is manufactured with advanced engineering expertise and offers maximum efficiency even in challenging site conditions thanks to its durable components, high-performance crushers, and compact design. The system's first chassis features a CJC-60 primary jaw crusher, a vibrating feed hopper, a bypass belt, and a wheeled mobile chassis with hydraulic legs. The second chassis houses a CSI 1210 secondary impact crusher, a three-deck vibrating screen, a return belt, foldable stockpile belts, and a dust suppression system. Thanks to the powerful impact crusher design of the JS-1, the final products have an excellent cubic shape, providing ideal aggregate quality, especially for concrete production. The plant's production capacity varies between 60 and 80 tons per hour, depending on the hardness of the rock. Thanks to its user-friendly automation system, SIEMENS – SCHNEIDER brand components, and PLC control, the plant can be fully automatically managed via a tablet. Installation is completed in a short time, and the need for external equipment is minimized thanks to hydraulic opening mechanisms. The JS-1 can be easily transported with a single tractor due to its dimensions suitable for international road transport. JS-1 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 600 x 380 mm Feed Height: 4.5 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Iajdpfsxqg Eljx Adwsl Total Motor Power: 275 kW Electric Generator Requirement: 550 kVA Plant Weight: 60 tons (total of two chassis) Plant Dimensions: 1st chassis 11x3x4.4 m / 2nd chassis 3.35x4.3x17.8 m Chassis Type: Double Chassis Why Choose the JS-1 Mobile Crushing and Screening Plant? CONSTMACH JS-1 is an excellent choice for professionals seeking maximum efficiency, minimum operating costs, and superior product quality in the rock crushing process. Its fully automatic control system, high mobility capability, and durable construction offer uninterrupted production for many years. Furthermore, CONSTMACH's engineering expertise, after-sales technical support, and spare parts supply guarantee ensure the continuity of your business. If you are looking for quality, performance, and reliability in stone crushing solutions, experience the difference with the JS-1 Mobile Jaw and Impact Crusher, backed by CONSTMACH quality. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Ijdpfx Aowiripodweal - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, For sale: ARTEC LEO handheld scanner (2021) with lifetime Artec Studio 17 software. The scanner has been used very little and is in like-new condition! Price: 7,000,000 HUF + VAT (17,500 EUR + VAT). (New price: Artec Leo €35,000 + Artec Studio €3,200) Available for viewing and testing at: Limes 3D Innohub Kft., 1117 Budapest, Budafoki út 60., HUNGARY. Iajdpowcfb Eofx Adwel

Condition: good (used), Code: 0001 Brand: DAN - LIST - DENMARK Model: MORSO Iaodpowl Ihgjfx Adwsl Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Ijdpjxd Dukjfx Adweal Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Speed: 30.9 rpm

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Iodpov Uq Tlofx Adwjal Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,989 h, functionality: fully functional, machine/vehicle number: 1126, overall weight: 1,877 kg, total length: 2,110 mm, total width: 1,290 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), noise level: 71 dB, Equipment: type plate available, Compresor Kaeser CSDX 140 Specificatie tehnică (caracteristici la presiunea de lucru de 8,5 bar, pentru întregul echipament inclusiv ventilator conform ISO 1217:2009 anexa C) Debit de aer la 8,5 bar(r) 13,70 m³/min Putere electrică totală consumată la 8,5 bar(r) 88,3 kW Presiune maximă de lucru 8,50 bar Randament motor de antrenare la mers în sarcină 94,7 % Turatie motor de antrenare 2978 1/min Clasă protectie motor de antrenare IP 55 Tensiune de alimentare 400 V / 3 Ph / 50 Hz Temperatură iesire aer comprimat fată de ambient* 7 K Nivel de zgomot 71 dB(A) Sistem de recuperare a căldurii Ijdpfxjft Sccj Adwoal Model: PTG 140 - 55 - apă caldă de la compresoarele KAESER cu surub - Recuperarea de căldură reduce costurile si protejează mediul. Prin refolosirea aerului cald se poate recupera până la 96% din energia consumată de compresor. Cu un schimbător de căldură în plăci tip PTG se poate recupera sub formă de apă caldă până la 76% din energia consumată de compresor. Fiecare litru de combustibil economisit reduce cu 2,727 kg emisiile de CO2, ceea ce este benefic nu doar pentru mediu, ci si reduce semnificativ costurile cu energia. La pre"urile de astăzi ale energiei, perioada de amortizare a unui sistem de recuperare a căldurii variază între 6 luni si 2 ani (folosind în sistemul de încălzire căldura recuperată cu un schimbător de căldură în plăci). Specifica"ie tehnică (caracteristici pentru compresor la mers în sarcină, la presiunea maximă de lucru) Căldura max. disponibilă 66(238) kW(MJ/h) (scăzând pierderile interne de căldură) Căderea de presiune pe circuitul de apă < 0,1 bar Încălzire apă de la 15°C până la 70°C Debitul de apă la delta t = 55 K 1,03 m³/h Poten"ial de economie* 10.411,- €/a Reducerea emisiilor de CO2 40.559 kg/a kWh/l; 2000 h ore de functionare

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to Isdpewiriijfx Adweal - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 20, warranty duration: 12 months, total height: 2,180 mm, total width: 3,060 mm, total length: 3,170 mm, SLIDING RACK FOR GLASS M80-20 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. Iasdpef S Hhasfx Adwol The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-10 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -20 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 306 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 18 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 18000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-20 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Particularly heavy design with high dead weight for maximum smooth running. Particularly smooth and precise running thanks to torsion-resistant machine housing. Large cast iron parallel fence with round rod guide, easy to move. Cast iron flywheels with rubber coating and cleaning brush. Large cast iron saw table, pivoting with ground and polished surface. polished surface. Precise cutting height adjustment via toothed rack with millimeter scale. Doors secured by limit switches. Self-braking motor. Two extraction sockets. High-quality saw blade guide type GL top/bottom. Useful accessories make these wood band saws even more versatile: GEBS 640 AS Saw blade thickness min./max. 0.5/0.6 mm Worktable dimensions 870 x 620 mm Worktable height 840 mm Cutting speeds 1660 m/min Flywheel 640 mm Max. Cutting height 400 mm Max. Cutting width 620 mm Saw blade length 4780 mm Precision guide top / bottom Isdpfsviq D Hex Adweal Saw table inclination 0° to +15° Motor power 2.2 kW / 400 V Weight 320 kg Promotional prices plus VAT 4.239,00 €*

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-Roll Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Double pre-bending. Iasdpofh Skpjfx Adwjl Working width: 1330 mm. Top and bottom roll diameter: 90 mm. Lateral roll diameter: 95 mm. Plate thickness capacity: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Top and bottom rolls are motorized with identical power output. Side rolls are motorized for vertical movement (up/down). Front opening for the top roll. Rolls are induction hardened to HRC 55/60, 2 mm depth. Special bearings for the side rolls. External lever for roll tilt adjustment. Sheet clamping with bearing-equipped device. 2-pedal foot control. Electrical cabinet compliant with CE regulations. Millimeter scale for sheet clamping readout. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with complete double pre-bending and front-release system. The top roll is stationary, while the lifting/lowering movement is applied to the side and lower rolls. Sheet clamping is simple: after inserting the sheet between the top and bottom rolls, the bottom roll lifts to secure the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Machine includes: - Front conical bending device on the top roll. - 2 digital readouts for side roll positions. - Roll grinding/turning after hardening treatment. - Roll hardening.

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Iodpfx Ajn Nw Ntodwjal Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Noise suppressor

Condition: new, Year of construction: 2025, The 5-axis machine is designed for the industrial machining of aluminium and steel profiles with large volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre. The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials. Machining area X: 7,100 mm Iedpfx Ajxt D Szsdwjal Machining area Y: 460 mm (4 axes) Machining area Z: 300 mm Machining axis A: 180° Machining axis C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum speed A: 3,600°/min Maximum speed C: 1,800°/min

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to Iaedpfxewirics Adwsl - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Iasdpsha E S Tjfx Adwel Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 Iasdpfx Aehcipgsdwjl The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Ijdpfx Ashbduzsdwoal Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 26, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-26 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-26 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -26 Iaedef S Hh Tjpfx Adwel The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 384 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 22 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 23 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 8 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-26 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Iaedpfod Tamlox Adwsl The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Glass racking system 10 drawers for 160 cm x 250 cm glass. Load capacity per drawer is 800 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, The subject of sale is a warehouse for storing glass panes (321 cm x 255 cm) in boxes (12 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Ijdpfof Sqf Uex Adweal The magazine is in the form of sliding, slightly inclined drawers. Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.