Used Linck for sale (24)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911294-0120, Rotary indexing table DV 55, manufactured in 2014, can be used for pre- or post-machining. Psdpfxjzpygte Abpjra In excellent condition! We have 2 units in stock at our Schlitz warehouse.

Condition: good (used), machine/vehicle number: 9049, LINCK DV 35 prism turner: Prsdpfezrxfysx Abpoa - Two toothed feed rollers, electrically driven (two separate motors) - Prism rotation, electrically driven (SEW 5.5 kW motor) - Large prism clamping cylinder, MADER KDI-125-0250-A-PPV-M, manufactured in 2017 Very robust machine construction.

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Prsdpfszvy Eijx Abpea

Condition: excellent (used), Year of construction: 2010, The following components of a Linck VM50 saw line are available: Condition of the machines is very good! Psdezfwlfopfx Abpsra Infeed device ZV21, model EV 50 (in stock) Profiling chipper ZD31, model VM50, 2 × 200 kW (in stock) Outfeed device AV31, model VZM (in stock) Centering device VZ21, model VZV (in stock) Log rotator DV21, model DV70-2 (in stock) Additional components: Infeed and centering device EVP – available from September 2026 Profiling chipper VM50, 2 × 200 kW – available from September 2026 Profiling aggregate VMP450 F61, 4 × 110 kW – available from September 2026

Condition: used, Components of a sawing system Manufacturer: Linck Type: VZM & CSMA consisting of: CSMA extraction device Manufacturer: Linck Type: Av / CSMA Year of manufacture: 2018 The CSMA extraction device offers powerful and flexible material handling in automated production lines. It is designed for variable workpiece sizes and ensures continuous material transport. Technical data - Drive power: 4 x 4 kW - Feed rate: 85 m/min VZM centering device Manufacturer: Linck Type: VZM The VZM centering device is designed for precise centering tasks at high feed rates. The robust design allows it to be used under demanding industrial conditions. Technical data - Drive power: 2 x 7.5 kW - Feed rate: 84 m/min Note: Prsdpozuz I Nofx Abpja The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Prjdpfox E Dbcox Abpea

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm Pedpsyyd Tnjfx Abpera • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Condition: reconditioned (used), Year of construction: 1996, Sawing unit, manufacturer Linck, type KCS 6 Base frame with 4 saw spindle units Twin-spindle system with 6 adjustable saw heads Cutting height 370 mm, weight 12,400 kg The machine is currently being overhauled in our workshop. Prodpfx Abezdiulspea

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Psdpfx Aszf Nbxjbpjra

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. Podpsxg Ubysfx Abpsra There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: excellent (used), functionality: fully functional, Linck High-Performance Frame Saw Type DS 71 Frame opening 710 x 710 mm. Stroke 500 mm. Speed 320 rpm. Hydraulic roller lift with adjustable roller pressure. Hydraulic feed continuously adjustable from 0 to 13 m/min. Pjdeuqmu Hspfx Abpsra Automatic overhang adjustment of the saw frame. Electromagnetic remote control. Jansen hydraulic saw blade tensioner with blade mount. 55 kW motor with gearbox. Hydraulic clamping carriage with hydraulic auxiliary carriage. Electrical switch cabinet with control and operator's panel. Dismantled and loaded free on truck. A video showing the saw in operation can be provided on request.

Condition: excellent (used), functionality: fully functional, Stable Linck roller conveyor with 2 discharge options. Total length: 16.30 m. Roller length: 950 mm. Construction height: 1.55 m. Equipped with 6 ejectors for left/right discharge. Includes impact wall, control flap, and electrical switch cabinet with control system. Suitable for model and sawn material. Prsdjyzr Ntepfx Abpea

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Prjdsxtwwkopfx Abpja Various tools Sale according to customer order.

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: Predpfjrvh Tmox Abpsa 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long Pedpengz N Iefx Abpsra 1 piece 140 mm Ø x 190 mm Ø x 173 mm long

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Drive power: 4 x 132 kW Feed rate up to 150 m/min Pjdowww Iyopfx Abpsra

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Predpfsv Raqxox Abpea Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Year of construction: 1985, condition: good (used), Linck recutting group consisting of: Pjdpfeufqicsx Abpera EV 40 infeed V40 chipper with pull-out rollers with 2x75/100 kW MKV circular resaw with side board separator with 2x200 kW incl. hydraulic units without switch cabinets can be inspected by arrangement. System can also be offered overhauled!

Condition: new, 2 new, two-part gang saw bottom rollers, 250 mm diameter, bore 105 mm, 685 mm long Psdpfoyctwtox Abpora

Year of construction: 1978, condition: reconditioned (used), Planer thicknesser 600 mm, planing width 600 mm, planing height 180 mm, 3-knife cutterhead, cutterhead diameter 125 mm. Fully overhauled, technically sound and ready for operation. New electrical system, all required lubrication points present. Cast iron body, weight 890 kg. Foldable tables, table height adjustable. Grease nipples at all necessary locations. Prodpoyabltefx Abpea

Condition: excellent (used), Heavy-duty Linck gearbox for gate drives up to 160 kW. Predpfx Absfn Rigopsa Shaft diameter 110 mm. Triple bearing arrangement. 1 pulley 1250 x 315. 1 pulley 630 x 315 mm. Other gearboxes also available.

Condition: reconditioned (used), Year of construction: 1993, multi-saw with moving saw linck masker Pjdpfxjlwp Die Abpora saw with a movable saw floating on hydraulics

Condition: used, heavy-duty gate tension car, manufactured by Linck, type Va, with auxiliary car Vy. Pjdpfx Aoc Ulvbjbpsra

Year of construction: 1984, condition: excellent (used), Frame saw with 600 stroke width 950 mm height 915 mm Prjdpfx Abofym Edepsa power 132 KW