Used Selco for sale (21)

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min Lrsdpfx Ajyqydcedvji MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 127 mm No of Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes Lrodpfxjx Swb Ne Advei

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes Lrsdpfxswuz Dye Advei

Condition: used, machine/vehicle number: 007671, Max. panel width: 3800 mm Max. panel length: 3800 mm Lodowuufdspfx Advsri No of Grippers: 7

Condition: ready for operation (used), Year of construction: 2010, Used machine in good technical condition – last operated in June 2025. Inspection and maintenance required. Ljdpjyv A Hlefx Advori

Condition: used, machine/vehicle number: 008409, Max. panel width: 4400 mm Max. panel length: 2200 mm Lrsdsygta Ajpfx Advei Main saw blade projection: 120 mm No of Grippers: 10

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Maximum panel width: 4500 mm Maximum panel length: 4500 mm Rear pushers – TWIN PUSHER 2.1 system Lsdpfx Adoyvz Hqevori Saw blade motor power: 15 kW 4 front support tables Air cushion table 2050 × 620 mm with rounded profile on the squaring side Rounded air cushion outfeed table, dimensions 2050 × 620 mm Remote cycle start button, complete with emergency stop button Software: Biesse OSI Label printer

Year of construction: 2006, condition: ready for operation (used), This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine. Application Types Ledpfsx D Nd Rsx Advjri Sawing (Wood)

Condition: good (used), Year of construction: 2001, functionality: fully functional, In good condition Lrodpeylhldofx Advji

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade Ø 320 mm Scoring blade Ø 200 mm (conical tooth) OSI control system Label printer Label printer holder on the console Cycle start button via remote control Ljdpeypbidefx Advsri Available July 2026

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes Lsdpfx Adjhvm Diovjri

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 3,200 mm, total length: 6,667 mm, total width: 5,916 mm, overall weight: 5,000 kg, Equipment: CE marking, scorer, We offer a horizontal panel dividing saw Selco EB90 Machine data Brand: Selco Model: EB90 Description: Horizontal panel saw Cutting length: 3,200 mm Maximum panel width: 3,200 mm Saw blade projection: 85 mm Clamping grippers: 6 Lrsdpfxjyrngzs Advsi Connection: 15kW, 3Ph, 50 Hz, 380V AC Weight approx.: 5,000 kg Year: 1999 3 rounded air cushion tables as support Software: Optiplanning Brochure can be provided upon request The machine is in impeccable condition (still in operation). Video can be provided upon request. Machine as seen, without dismantling and freight.

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A Lsdpsyrffnjfx Advsri 260 A at 60% ED 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

Condition: good (used), NUMERICALLY CONTROLLED PANEL SAW WITH AUTOMATIC LOADING  Brand: BIESSE SELCO  Model: EBT 120 L, CE  Availability: Immediate Description:  Solid, reliable and versatile panel sawing centre, able to satisfy the needs of all types of customers: from the small company looking for maximum simplicity in use, to the medium-sized company that works on multiple shifts or that wants to automate the process, up to the large company that works in batches.  Base: The single-shoulder structure makes the carriage/base assembly extremely compact. The guides are fixed to the base along their entire length to ensure maximum linearity of the stroke. The blades rise on prismatic recirculating ball guides that ensure perfect perpendicularity with the work surface, resulting in an excellent cutting finish.  Carriage and blade travel on prismatic guides: maximum rigidity and perpendicularity of the blade to the panel stack. Drastic reduction of friction and wear of materials, even at the highest speeds. Maximum stability over time of the linearity of the travel and the characteristics of the structure.  Presser: the openings made in the pressing bar eliminate the interference zone with the clamps allowing complete use of the panels with small tail cuts and trims as desired.  Blade carriage: The transmission of motion to the blade carriage carried out with a pinion/rack offers greater fluidity of translation and a better cutting finish  Material parking: by moving the tables it is possible to create a parking area for machined pieces and bars outside the cutting line. Technical characteristics: Ljdpevvb Agefx Advori • Cutting dimensions mm. 4,400 x 2,200 • Lifting table dimensions mm. 4,960 x 2,270 • Blade projection mm. 122 • Blade diameter mm. 430 • Scoring diameter mm. 300 • Blade carriage speed m/min. 0-130 • Pusher speed m/min. 60 max with Bruschless motors • Pusher stroke mm. 5,240 • Total installed power Kw28 • Operating pressure Bar 7 • Suction nozzles: 1 x 200mm. - 1 x 150mm. – 2 x 100mm. • Machine dimensions 8,788 x 7,198 mm. • Machine weight KG 7,500 • Machine documentation: use and maintenance manual, software manual, spare parts catalogue, wiring diagram, CE declaration of conformity. Optionals: • Lateral aligner with two pressure elements • Comb stop for material with protruding edge • Loading lift table • Front aligners for automatic loading • Front air curtain tables no. 4 • Pneumatic grippers no. 7 • The blade protrusion is automatically adjusted based on the thickness of the pack to have maximum precision even when cutting a small number of panels • Electronic adjustment of the scoring blade • The alignment of the scoring blade with respect to the main blade is carried out from the outside of the machine body, with the blades in motion and in absolute safety • Quick and safe blade change with pneumatic locking device

Year of construction: 2000, condition: used, TIG welder direct current 380 Volt for stainless steel Arkoquad 220 40 % ED at 220 AH 10 % ED at 140 AH with torch Ground cable Pressure reducer Water cooling Lsdpfx Aogt Auuedvori

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Ljdpeukhd Aofx Advjri Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, Lrodpfexranpox Advei management of BOMs, plant control

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Lsdpfx Ajmt Hhwedvsri Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Lrjdsxt Sgtspfx Advoi

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Lrodpfxsuc Idxe Advsi Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm Lredpfjvrrldex Advji No of Grippers: 11 Thin sheet loading: yes