Used Log Carriage for sale (3,669)

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos Dedpjwcwndjfx Akzskp -Dimensions: 460/190/H205 mm -Weight: 21.6 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Djdpfx Akev Tv Tnezskp -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe Dodpfexfguisx Akzskp -Tailstock: with guide carriage -Centre height: 100 mm -Dimensions: see drawing in the photos -Dimensions: 580/100/H180 mm -Weight: 11.1 kg

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each Dksdpjtpkv Aefx Akzjp -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg Dodpfjd N Sihex Akzokp

Condition: good (used), Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 Dsdpfx Akedc Iplozskp -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 Dedpfx Akoxlppiszokp -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg Dsdpfxov Hxube Akzskp -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter Dkodpfoyxyanex Akzep - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: used, mileage: 3,00,000 km, power: 368 kW (500.34 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro6, loading space length: 6,000 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, MAN TGS 33.500 Dkjdpfszkdqrex Akzep Registration: km !!!! 6X6 - ALL-WHEEL DRIVE !!!! Wheelbase: 3900 Manual transmission Retarder Euro 6 Loading area: 6m Crane: Penz 12Z Year of manufacture: 2016 2x Telescopic Timber grab On request, a suitable tandem trailer (7500 kg) can be provided. Trailer Gsodam, year of manufacture: 2015 ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/???/???... Roman We will be happy to assist you with your financing or leasing options. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer to Munich Airport or Passau train station

Condition: used, mileage: 4,54,588 km, power: 353 kW (479.95 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 16,050 kg, maximum load weight: 9,950 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,900 mm, next inspection (TÜV): 09/2026, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: steel, number of seats: 2, loading space volume: 37 m³, loading space length: 5,800 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, trailer coupling, Unladen weight: 16,050 kg, permissible total weight: 26,000 kg, cargo area (L W H): 5,800 mm x 2,480 mm x 2,600 mm, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 315/80 R22.5, leaf spring suspension, rear-mounted crane: wood crane FASSI TZ12.2, seat heating, radio, central locking, underrun protection, sun visor, twin tires, cooler box, all-round beacon: light bar, wide tires, WOOD CRANE, make FASSI, type TZ12.2, lifting capacity 9.00 m / 1100 kg, crane year of manufacture 2020, leaf spring suspension, all-wheel drive 6x6, reversing camera, TÜV valid until 09-2026, GSODAM body, loading length 5800 mm, payload 9,875 kg, clutch and turbo in new condition, gearshift pattern renewed, WMA56SZZ4GM715614, sale on commission, non-binding offer, subject to errors and prior sale. The image may not match the offer.; AWD Dksdpfxozh Rxqo Akzop

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves Dkodpfx Akjzcw Dkozjp - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, mileage: 5,32,997 km, power: 360 kW (489.46 HP), first registration: 10/2017, fuel type: diesel, empty load weight: 14,750 kg, maximum load weight: 11,250 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,700 mm, fuel consumption (urban): 1,035 l/100km, color: green, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of seats: 2, total length: 10,350 mm, lifting height: 4,000 mm, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, trailer coupling, Color: Green RAL6029, Body builder: Loglift, Unladen weight: 14,750 kg, Permissible total weight: 26,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 315/80 R22.5, Air suspension, retarder, digital tachograph, Electronic Braking System (EBS), Electronic Stability Program (ESP), automatic climate control, Adaptive Cruise Control (ACC), H7 headlights, radio, Bluetooth hands-free, adjustable steering column, roof hatch, fog lights, kerb mirror, wide-angle mirror, immobiliser, refrigerator, axle load indicator, hill start assist, LED daytime running lights, 1x15-pin connector, telematics system, upper and lower bunk, EGR, SCR Crane: Loglift type F96S. Non-binding offer, errors and prior sale excepted. The illustration may not correspond to the offer. Dkodpfx Aoy Sp Inokzjp

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, The log processing line includes the following units: • log splitting band saw – ELCA SNV14 • log handling carriage – ELCA CMOL33 Dodjzg Dl Ijpfx Akzjkp • planer – ELCA PTL1000 • cross-cutting circular saw – ELCA TRCBT3 • multiple-blade rip saw – COSTA LEONE 2160 • log profiling system – VISION_1200 • material handling systems required for servicing the processing line ◦ cross conveyor chain conveyor ◦ roller conveyor • band saw sharpening machine – ALIX AF 518 • dust and chip extraction system – VENTIL VENETA, model PF/JET, designed specifically for the system

Condition: excellent (used), Catalogue number 7979 TECHNICAL DATA - Max. diameter of processed dowels: 130mm - Installed bushing: 57mm - Min. input material length: 800mm - Knife head drive motor: 18.5kW - 4 feed speeds + forward/reverse - Feed motor: 2.2kW In order: - Infeed traction rolls, toothed: 6 pcs - 3-knife head - Outfeed traction rolls, smooth: 6 pcs - Extraction port diameter: 140mm - Additional bushings included: 40, 45, 50, 75mm - Dimensions (L/W/H): 3100x1300x1400mm - Weight: 2100kg ADVANTAGES – Polish manufacture – 3-knife head – Additional bushings included: 40, 45, 50, 75mm – Used dowel rounding machine, very good condition Dsdpfx Akszcc Rvjzekp Net price: 31,900 PLN Net price: 7,590 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change with higher fluctuations)

Condition: used, mileage: 2,74,000 km, power: 360 kW (489.46 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 15,940 kg, maximum load weight: 9,985 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, all wheel drive, central locking, compressed air brake, crane, cruise control, differential lock, fog lights, onboard computer, parking heater, truck registration, Scania G490 6x6 timber transporter | Penz crane 12Z 8.70 | 2 pairs of bolster stakes | Automatic transmission, EURO 6, air conditioning | Cruise control, heated seats, auxiliary heater | Radio | Unladen weight 15,940 kg | Loading length 5.5 m, up to the crane 5.95 m | 50 mm trailer coupling | Wheelbase 3,900/1,355 mm | Subject to errors and prior sale Dkedpfoy Ifk Rjx Akzep

Condition: used, empty load weight: 6,000 kg, maximum load weight: 32,270 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2012, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller timber trailer 3-axle | BPW axles with disc brakes | Dead weight 6000kg | Lift axle | Tires: 385/65 R22.5 Errors, input and advance sales excepted. Dodpewdwp Dsfx Akzekp

Condition: used, empty load weight: 5,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller timber trailer 3-axle | SAF axles with disc brakes | Unladen weight 5,520 kg | Payload: 32,480 kg | Lift axle | Tyres: 385/65 R22.5 | 10 pairs of stakes | Subject to error, input mistakes and prior sale. Dkedpfsx S N Ubox Akzjp

Condition: used, empty load weight: 5,730 kg, maximum load weight: 32,270 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2014, next inspection (TÜV): 05/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Schwarzmüller timber trailer 3-axle | BPW axles with disc brakes | Dead weight 5730 kg | Payload: 32270 kg | Lift axle | Pickerl 05/25 | Tires: 385/65 R22.5 Errors, input and advance sales excepted. Djdpfewc Apyjx Akzjkp

Condition: good (used), Year of construction: 2008, Log Stacker Year 2008 Description -straight infeed -infeed belt -reject unit -pressing station -turnoverbelt -delivery to right Dkodpfezh Ev Rsx Akzep

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included - Additional knives included - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Dksdsza Eqgopfx Akzjp Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, mileage: 2,72,901 km, power: 375 kW (509.86 HP), first registration: 01/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, New ZF transmission + new clutch (installed 10/22 at 228,014 km). Short log biofuel. Hydrodrive front axle, steered and liftable rear axle, active roll stabilization, axle load scale for rear axle + trailer, parking brake on the front axle, display for trailer data, radio, MAN telematics, battery main switch, 12/24V sockets, LGS IV, 1 fire extinguisher 2 kg, LED daytime running lights, snow chain holder, RIO box, MAN Media 7" color display radio with navigation SD card for all of Europe, hands-free system for 2 mobile phones, AUX-in/USB, Alucar short log body with 4 outrigger supports, 6850 mm loading length, Epsilon M12ZMaster 91 crane with Masterdrive, cross-lever control (excavator control), hydraulically pre-controlled, double boom extension, 9.10 m reach, wide support base RX 47 (4.70 m), biofuel, toolbox, snow chain holder, 4 x LED spotlights. Djdpezhzhpefx Akzskp

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Dksdew Erlcjpfx Akzep Technical condition: Very good Description: ISO 3A (51 cm), capacity 5,000 kg, width 1,350 mm. To enlarge the width of the original fork carriage, can also be supplied to increase the lost load centre and as an adapter fork carriage between the forklift truck and other attachments. ID OS1670

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 3,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: Mast type Triplex EFG 425-430 Carriage class 3A (51 cm) Width 1120 mm Inside dimension 415 mm Outside dimension 475 mm Height 635 mm ID OS975 Dksdpfx Akot S Rv Dezep

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Dedpfxsw Dwt Ns Akzokp Technical condition: good Description: LINDE 1120 TRIPLEX sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm