Used Log Skidder for sale (1,723)

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Klsdpfx Adswt S Nkswol Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: good (used), LOG-O-MATIC (Mainaschaff/FRG) Surface Grinding Machine FS 5030 AH Year: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal/cross/vertical feed Accessories/Equipment: Electromagnetic chuck approx. 500 x 300 mm Manual wheel dresser on support arm Paper band filter Coolant system Machine lamp Machine supports Accessories: Side, angular and radius dressing device Balancing scale Demagnetizing plate Kjdpfx Adsxz R Niowoll The machine is in very good condition and comes from a training facility Available from March 2026

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Klsdpfx Adsu Smq Sowsl - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: refurbished (used), Log feed system IDC000095 - height: 2 m - width: 2,2 m - manufacturer: Bezner Ksdpju A N Eyjfx Adwsll - log diameter: from 50 mm - 200 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 12-25, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. Kedpfxoup U Rao Adwjll - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included - Additional knives included - Operating pressure: 6 bar - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm Kledpfsyab Rvox Adwsl - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7661 TECHNICAL DATA - max machining diameter range: 140 mm - min input material length: 900 mm - machining allowance (on diameter): max 30 mm - cutter head drive motor: 15 kW Klodjwnnkmepfx Adwel - stepless feed speed adjustment via inverter - feed motor approx. 2.2 kW - pneumatic cylinders: 2 pcs - knife setting tool included - additional bushings in the set: 80, 100, 130 mm - mounted bushing diameter: 70 mm In order: - infeed chute - 4 gear-driven feed rollers (first two pneumatically adjustable) - 3-knife cutter head - 3 smooth outfeed feed rollers - dimensions (LxWxH): 4500x850x1800 mm - weight approx. 3000 kg ADVANTAGES – 2 pneumatic cylinders – knife setting tool – additional bushings included – used rounder/turning machine – very good condition Net price: 43,900 PLN Net price: 10,450 EUR based on a 4.2 exchange rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7753 TECHNICAL SPECIFICATIONS - max diameter of machined dowels: 130mm - installed bushing: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - cutter head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed feed rollers - 3-knife cutter head - 3 smooth discharge feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – made in Poland – 3-knife cutter head – used rounding machine, very good condition Net price: PLN 36,900 Klsdpfx Asxhddgsdwsl Net price: EUR 8,780 based on an exchange rate of 4.2 PLN/EUR (Prices may vary with significant fluctuations)

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Kledpfxsx D Dags Adwol Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: new, functionality: fully functional, maximum load weight: 3,000 kg, lifting power: 3,000 kg/m, Year of construction: 2025, Wood grapple for various forestry machines, farm loaders, wheel loaders, loaders, and other carrier vehicles (e.g.: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, etc.) The grapple has an opening width of approx. 1.2m. The rotator allows trunks to be rotated so that they can be picked up or put down precisely. The inclination is adjusted hydraulically so that it can be easily adjusted. Various mounting options are also available, e.g. Euro mounting, H&R standard mounting, etc. Individual adjustment is also possible. Kedpfx Asvygigedwsll Other accessories for forestry machines, wheel loaders, etc. are also available from us. Please contact one of our trained consultants to receive an offer tailored to your needs. We look forward to hearing from you! Your H&R GmbH

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Klodpfsv Ddtksx Adwsl Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: used, Field of application: Mining Klodpfxex Dh S Hj Adwel Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly.

Condition: used, empty load weight: 5,520 kg, maximum load weight: 32,480 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2017, next inspection (TÜV): 08/2025, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller timber trailer 3-axle | SAF axles with disc brakes | Unladen weight 5,520 kg | Payload: 32,480 kg | Lift axle | Tyres: 385/65 R22.5 | 10 pairs of stakes | Subject to error, input mistakes and prior sale. Klodpox S N Ubjfx Adwsl

Condition: used, empty load weight: 5,750 kg, maximum load weight: 32,250 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2020, loading space length: 13,000 mm, total length: 2,550 mm, total height: 13,150 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller 3-axle timber trailer | BPW axles with disc brakes | Unladen weight: 5750 kg | Payload: 32,250 kg | Lift axle | Tyres: 385/65 R22.5 | Toolbox | 8 pairs of bolster stakes | Very good condition | Subject to errors, input mistakes, and prior sale. Klsdpfjx Sytnox Adwsl

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 24,000 kg, axle configuration: 2 axles, first registration: 07/2013, total length: 2,550 mm, total width: 4,000 mm, suspension: air, tire size: 275/70 R22,5, Equipment: ABS, Ressenig tandem timber trailer | BPW axles | air suspension | tyres: 275/70 R22.5 | 2 pairs of stanchions | drawbar with adjustable length | length: 8600mm–12100mm | Errors, input mistakes and prior sale excepted. Kodpfxsxiq Uno Adwsll

Condition: used, empty load weight: 4,200 kg, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2006, front tire size: 275/70R22,5, rear tire size: 275/70R22,5, Equipment: ABS, | Ressenig timber trailer | year of manufacture: 2006 | BPW axles with drum brakes | 2x pairs of stanchions | 275/70R22.5 twin tires | drawbar eye 50mm | tare weight: 5300kg | payload: 13800kg | total weight: 18000kg | 6 meters of timber | Austrian vehicle with valid sticker | good condition | errors excepted, subject to entry and prior sale. Klsdpfxjrg H Aus Adwsl

Condition: used, machine/vehicle number: YV2A4BAD4XA29xxxx, mileage: 12,44,000 km, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21144 Specifications – Volvo FH16 (1999): Year: 1999 Mileage: approx. 1,263,000 km Kedpfjw Ruxzjx Adwell EU approved until: 30.11.2026 6x4 Wheelbase: 430 / 138 cm 520 hp Engine brake Suspension: parabolic Manual gearbox Tires (see photos) Equipment and Condition: Extra wiper heating Front tires are very worn Thermostat replaced Instrument cluster malfunction Fuel gauge not working Central lubrication Liftable axle All belts recently replaced in workshop Valve cover replaced by owner Rear flatbed replaced by owner 400-liter diesel tank Ready for delivery Briab grain trailer (1983): Year: 1983 EU approved until: 19.06.2026 3 axles Length: 1010 cm Air bellows replaced Tipper ABS fault (owner says it’s due to a sensor) Ready for delivery Narko timber trailer (1981): Year: 1981 EU approved until: 30.06.2026 Left rear brake band replaced Faulty sensor Ready for delivery Cranab CRX 10 t/m crane (1993): Certified until July this year New diesel heater Cabin...

Condition: used, machine/vehicle number: YV2R0P0D5NA88xxxx, mileage: 3,30,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22080 Specifications: EU-approved until 18.11.2026 Model year: 2021 Mileage: 330,000 km (may increase slightly) Klsdpfsx Izq Tsx Adwjl Automatic transmission Crawler gear Euro 6 Bergfegen body from 2016, ExTe A9 2.8 m Aluminum rims Length: 1,070 cm Width: 255 cm Wheelbase: 460 cm Curb weight: 15,960 kg Drivetrain: 6x4 Power: 751 hp LED light bar Sleeper cab Radio/CD Climate control / A/C Crane specifications: Model year: 2019 Epsilon M12 Electric control with mini joysticks Water heater Reach: 8.3 meters Description: 2021 Volvo FH16 750 timber truck.The truck is recently EU-approved and currently in daily operation, so mileage may increase slightly.Equipped with a Bergfegen body from 2016 and an Epsilon M12 crane from 2019.Available for delivery on short notice. Km: 330000 HK: 750 Technical approved: Yes EU-approved until: 18.11.2026 Own weight: 15960 Total Weight: 32000 Payload: 15965 Width: 255 Length: 1070 Euro: 6 Model: FH16 750 6x4 Tømmerbil m/ Epsilon M12 kran Gearbox: Automatic

Condition: used, machine/vehicle number: YV2R0P0D3JA83xxxx, mileage: 5,39,000 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 21284 Specifications: EU-approved until 30.06.2026 2018 model Mileage: approx. 539,000 km I-Shift gearbox Steel suspension front, air suspension rear Tires (see photos) Retarder Palfinger Epsilon M12L timber crane (2019 model) Euro 6 Autoline sand spreaders Length: 1045 cm Width: 255 cm Wheelbase: 460/137 cm Curb weight: 15,890 kg Drivetrain: 6x4 Power: 751 hp Tool storage Tow hitch Bull bar Auxiliary lights (long-range) 2x rotating beacons Sleeper bed Refrigerator Coffee maker Microwave Radio/CD Climate control / AC Description: 2018 Volvo FH750 6x4 timber truck for sale.Equipped with a Palfinger Epsilon M12L crane from 2019.The truck is under a gold service agreement and can be delivered on short notice. Ksdpfx Adexbxqzowjll Km: 539000 HK: 751 Technical approved: Yes EU-approved until: 30.06.2026 Own weight: 15890 Total Weight: 32000 Payload: 16035 Width: 255 Length: 1045 Euro: 6 Model: FH750 Gearbox: Automatic

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2022, next inspection (TÜV): 02/2026, loading space length: 13,550 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, 3-axle platform for sawn and round wood - JANZEN System Werlte First registered 02/ 2022, from 1st hand Empty weight only 6,000 kg Loading length 13,550 mm, designed for fifth wheel height 1,200 mm Aluminum front wall reinforced version 12 stake pockets welded into the outer frame on each side, 2° incline, as a parking option directly behind the front wall 8 stake pockets across the direction of travel, in the middle in the longitudinal direction 8 stake pockets distributed over the entire length welded 16 pieces ECOO aluminum stakes type 9, load capacity per stake pair 9,000 kg, 8 rows of toothed strips between the stake pairs Chassis fine-grain steel S700, KTL coated and painted Kledpfew I Ixpox Adwol SAF axles reinforced off-road version, with large disc brakes, 430 mm 1st axle lift axle WABCO trailer EBS with anti-skid protection RSS WABCO smart board, with weight display axle loads Tires 6-fold 385/65 R 22.5, tread depth 90% Lighting full LED Crank seat post full load RENTING is the new BUYING, also available with us in full service rental IMMEDIATELY-----

Condition: used, machine/vehicle number: YV2R0P0G3PA31xxxx, mileage: 1,33,908 km, Year of construction: 2023, Please contact ATS Norway for more information Please provide reference number upon request: 22101 Specifications: 2023 model 133.908 km EU approved until: 03.10.26 Automatic transmission Euro 6 751 hp Tires (see pictures) Lift on 2 axles Spring: full air Timber crane Auxiliary light Cow catchers 8x4 Gold deal Service history Refrigerator Radio Bed Webasto Ready for delivery   Ksdpox Sckiefx Adwsll Description: We have a 2023 Volvo FH16 8x4 Globetrotter Royal timber truck w/2023 Loglift timber crane for sale. The car functions as it should and is well maintained and cared for by the owner. The car has a gold agreement and all services have been taken up to date. Mileage will increase slightly as it is in weekly operation. Ready for delivery Km: 133908 HK: 750 Technical approved: Yes EU-approved until: 03.10.2026 Own weight: 13580 Euro: 6 Model: FH16 8x4 Globetrotter Royal tømmerbil m/2023 Loglift tømmerkran Gearbox: Automatic

Condition: used, machine/vehicle number: YV2RT60G7KA83xxxx, mileage: 4,31,205 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 19523 Specifications: - 2019 model - 431,205 km - i-Shift - Euro 6 - 551 HP - 8x4 - Retarder - Lift on 3 axle - Tires (see pictures) - Suspension: full air - Hydraulic outlet - 2016 Palfinger crane - Crane Certified to: 11/25 - 8 meter range - Timber clip - Support legs - Air conditioning/AC Ksdpfx Adsvyftkswell - Auxiliary light - Cowcatcher - Coffee maker - Heated mirrors - Diesel heater - Refrigerator - Aluminum rims - Radio - Videos - Ready for delivery Description: The timber truck has EU approval until 18.07.25 and the crane is certified until 11/25. The truck shows signs of being well maintained by the owner. Everything functions as it should according to the owner and can be put to work straight away. Ready for delivery. For more information, price, and photos, see the listing on our website: Km: 431205 HK: 550 Technical approved: Yes EU-approved until: 23.07.2026 Own weight: 12650 Total Weight: 42000 Payload: 29275 Width: 255 Length: 952 Euro: 6 Model: Fh540 8x4 Tømmerbil m/ 2016 M110L80 Palfinger krane og tømmerklype

Condition: used, maximum load weight: 17,610 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 01/2022, next inspection (TÜV): 01/2027, loading space length: 5,250 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, DOLL 2-Axle Central Axle Trailer, 2-Bolster Variant First registration: 02/2022, single owner Permissible total weight (technical): 21,000 kg Unladen weight: 3,390 kg – SAF axles, off-road version, with drum brakes 1st axle: LIFT AXLE with automatic lift axle control and start assist Air suspension WABCO trailer EBS Kjdpfjx Rr U Ujx Adwoll air reservoirs made of aluminum full LED lighting 4 x LED work lights 8 x 275/70 R 22.5 tires Chassis/load length approx. 5,250 mm Suitable for transporting: 1x 6,100 mm 1x 5,100 mm 1x 4,100 mm 1x 3,700 mm 2x 3,100 mm 2x 2,500 mm 2x 2,100 mm High-tensile steel chassis, continuous aluminium chequer plate covering 50 mm towing eye JOST swiveling support leg 4 x LED work lights 4 x ExTe steel bolsters D7 with 8 x ExTe telescopic aluminium stakes D7 4 x clamp-mounts One pair of sliding stops before the second and third bolster Load capacity per pair of stakes: 7,000 kg 1 x grab protection rest Grab rope front, grab rope rear – between third and fourth bolster RENTING IS THE NEW OWNING, available from us immediately also as full-service lease-----

Condition: new, machine/vehicle number: f044065451f6d849ee7a5b9f8, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385 / 65 r 22,5, Further information Chassis semi-trailer forwarding Welded steel construction in reinforced design, only 2 side members as double T-beams with steel/checker plate between the side members, saddle plate with replaceable 2 kingpins. Protective plate for rear lights. 1 steel storage box, recessed between side members 8 pairs of lashing eyes bolted or welded to the frame at the manufacturer's choice 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Kodoi Rivwspfx Adwoll Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EC 1 spare wheel holder for 1 e-wheel, with wheel fastening set 8 wooden stanchions of the manufacturer's choice, bolted to frame with 2 wooden stanchions each, telescopic from 1800 to 2800 mm, per pair 7 to. Axles + suspension SAF disk brake axles with 430 mm disk diameter Air suspension with lifting & lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle spacing offset mm (combined transport) up to 44 tons gross train weight Wheels and tires 385 / 65 R 22,5 at the manufacturer's discretion Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Front bulkhead/front stanchions Steel/grid bulkhead, approx. 2,300 mm high, bolted to the frame Approval / plates Country of approval: Germany Approval according to EC 2007/46 Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Black coated support legs Front wall hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: 057736dac221bda3fc469966a, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded construction Slightly sloping outer frame with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Front gear support leg Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Kledpfx Aoi Ri H Dedwel 1 open storage compartment for stanchions, underneath loading area 4 pairs of stanchion pockets embedded in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of stanchions W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Tandem trailer drawbar Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm, (Note! Observe load distribution and drawbar load) Axles + suspension GFA axles with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Screen printing plates approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of registration: Germany With Dekra approval and expert opinion 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures!