Used Log Crosscut Saw for sale (33,048)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: Dsdexn Rt Uopfx Addocr • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 12-23, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length Dsdpfxeup U Ras Addocr * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm Dcodpfxst E Sile Adder - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 2005, functionality: fully functional, cutting height (max.): 140 mm, cutting width (max.): 600 mm, saw blade diameter: 500 mm, table length: 3,000 mm, table width: 620 mm, type of input current: three-phase, saw blade bore: 30 mm, – Year of manufacture: 2005 Dcodew H R Tbspfx Adder – Polish production – DTR and CE TECHNICAL PARAMETERS: – Cutting width: 600 mm – Cutting height: 140 mm – Blade diameter: 500 mm – Main motor: 5.5 kW – Pneumatic clamping – Nozzle diameter: 120 mm – Saw spindle diameter: 30 mm – Feed table: 200 x 62 cm – Discharge table: 300 x 62 cm – Transport dimensions (L/W/H): 300 x 190 x 150 cm – Weight: 650 kg

Condition: new, Year of construction: 2022, functionality: fully functional, Holtec ES 121 SHK 4 m Year of manufacture: 2022 Control: Simatic HMI Saw chain: 4788 (190 cm) Guide bar: 3322 (190 cm) Sawn timber data: Packages for cutting: Max. 4200, an.= 1200 al.= 1200, Minimum: 2,500 Packages after cutting: max: 4,000, min: 700 Dcodpfxox Dmavo Adder Cutting waste: max. 300 Operating voltage: 400 V 50 Hz Oil filling: HLP-D-32 Tank capacity: 70 l Pressure: 70 bar The machine is unused and dismantled. Inspection possible at any time.

Condition: used, Holtec package cross-cut saw - hydraulic lowering of the saw blade - length measurement - hydraulic package ejection Dcedpfsxzr Efsx Addjr

Condition: excellent (used), Model cross-cutting system Brodbaek TYPE BCO 5/150 Dcodpsxz R Ulefx Adder Already dismantled Sale upon customer request

Condition: used, No. 3197 Vertical log band saw Bögli 1600 Used, the machine has been continuously maintained and modernized Sawing operation was discontinued in summer 2024 For logs up to 1500 mm in diameter Clamping carriage approx. 7650 mm long, 5 support arms Clamping carriage approx. 3000 mm wide The maximum length that was cut is 8000 mm Cutting capacity averaged 55 - 70 solid cubic meters per 8.5 hours 2 core cut-off saws Drive motor 55 kW, 1460 rpm Roller diameter 1600 mm Saw blade maximum width 205 mm, length 10560 mm, thickness 1.65 mm Hydraulic unit replaced in 2007 Dodpfx Asvvm Iuoddecr Chip carriage rollers and shafts replaced in 2011 The system was operated by 3 people Operator cabin with remote control and video surveillance Space requirement approx. 25000 x 10000 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in the description and price reserved In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), CATALOG NUMBER 7181 TECHNICAL DATA - max disc diameter: 300mm - disc bore diameter: 30mm - disc guard - max cutting height: 100mm - max cutting width: 700mm - possibility of angle cutting in the vertical plane +90°/-90° (arm travel or disc travel) - possibility to rotate arm right/left - motor: 2.2kW - table size: 950x700mm - extraction port diameter: 60mm - dimensions (LxWxH): 1200x950x1400mm - weight: 155kg ADVANTAGES – manufactured in Italy – not repainted – very good condition – used saw Dcsdjqffrcjpfx Addsr Net price: 6500 PLN Net price: 1550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (with larger exchange rate fluctuations the price may change)

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw max. cutting width: 800 mm max. cutting height: approx. 150 mm Dedextwk Djpfx Addscr saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: used, Technical data: Saw blade diameter: 500 mm Automatic saw feed Max. cutting height: 160 mm Table length: 1950+4000 mm Table width: 550 mm Table with integrated rollers Roller diameter: 80/60 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 6,700 mm Width: 1,600 mm Dsdsxz Dnropfx Addjcr Height: 1,900 mm

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Djdpfxovvkm Is Addocr Storage location: Nattheim

Condition: new, Year of construction: 2025, crosscut and miter saw type: ZS 200 N - 5 KW motor Dedpfxji Dfidj Addscr with machine stand, but without saw blade Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: 001-2023, Band Saw for Sale – Complete Documentation Included and all machine papers are provided, including direct contacts of the manufacturer’s technical staff. Included Equipment: -Log feeding system (visible in the video) -2 brand-new high-quality blades -2 sets of sharpeners for blade sharpening Cutting Capabilities: -Cutting diameter range: 9 – 32 cm -Can cut rolls up to 60 cm length (medical sheets) -Upgrade option available for cutting 2 logs at once -Approximately 20 cuts per minute -Blade and Cutting Control -Automatic blade sharpening -Adjustable sharpening length -Adjustable sharpening frequency (after how many cuts) -Adjustable cutting speed for all cuts -First and last cut can be individually slowed down or sped up -Blade speed adjustable -We operate the machine at 40% speed and have never needed to go higher -Adjustable starting point of the moving table -Each individual cut can be configured separately -Blade guides made from high-quality bearings Dcodpfx Aexz Smvsdder -Blade width: 9 cm -Blade thickness: 1.2 mm -Blade tension indicator -Adjustable blade wheel angle Machine Build Quality: -Built from high-quality components and quality mechanical parts

Condition: excellent (used), CATALOG NUMBER 7774 TECHNICAL DATA - max saw blade diameter: 500mm - spindle diameter: 30mm - top pneumatic hold-down - blade guard - pneumatic blade feed - max cutting height: 160mm - max cutting width: 585mm - main motor: 6.2kW - extraction port diameters: 80, 120mm - table dimensions (L/W): 1180x800mm - table height from base: 895mm - roller tables: 2 pcs - infeed roller table with guide: 1770mm - outfeed roller table with guide: 900mm - roller table width: 585mm - overall dimensions (L/W/H): 5000x1360x1370mm - weight approx.: 500kg ADVANTAGES – manufactured in Poland – original DTR documentation + CE (EU) – 2 roller tables – pneumatic saw blade stroke – used saw in perfect condition Dodpjxl Dycofx Addjcr Net price: 19,900 PLN Net price: 4,740 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Year of construction: 2014, condition: refurbished (used), functionality: fully functional, UHM120_H_T TANDEM BAND SAW Diameter of Wheels Ø 1200 mm Width of Wheels 140 mm Max. Cutting Height 1090 mm Max. Cutting Width 620 mm Upper Wheel Tilting 2×0.37 kW Movement of the Tandem 0.75 kW Hydraulic Unit Motor 2.2 kW Main Motor 2×45 kW - 1450 rpm Weight without Motor ~9000 kg - Capability to saw two timbers in one pass by tandem lined two band saws - Timber thickness is adjusted by two axes control system on band saw and log carriage system UTA_Z4 HYDRAULIC LOG CARRIAGE Max opening of headblocks :1000 mm Max opening of hooks : 1070 mm Forwarding speed :160 m/min Speed of headblocks :320 mm/sec Dcedpfx Adeu Rmqijdor Hydraulic unit of forwarding :22 kW Headblocks : 4 pcs Width of rails : 1220 mm - Fixed fence-horizontol movable hooks. The distance between fence and hooks can be adjusted to desired position min: 35 mm- max: 145 m - Independent horizontal move hooks, log is able to be easily aligned according to to cut axis while clamped and is able to be adjusted to a fix distance of the hook and the fence -min:15mm - max:145mm - Two sets of joysticks with six buttons each to control head blocks, hooks and turning arms and 1 set of hydraulic pedal for carriage forward backward movement Conveyors 1. 14 mt longitudinal log conveyor 2. 6 mt Trasnversal Log Decking 3. 7 mt Longitudinal Timber Conveyor

Condition: excellent (used), Exotic log band saw - Feeding cross conveyor with feeder Dcjdpfjkzg Ihsx Adder - Brenta band saw carriage, type Bamat 1600 opening 1600 mm, 5 trestles, 3 log turners - circular cut-off saws, 2x 13 kW - Brenta band saw, type Irpad 1600 1600 x 240 mm, saw blade width 260 mm - take-off roller table - roller conveyor with cross haul-off - cross conveyor - roller table

Condition: excellent (used), CATALOG NUMBER 7680 TECHNICAL DATA - Max. blade diameter: 500mm - Spindle diameter: 30mm - Hydraulic blade stroke - Max. cutting width: 500mm - Max. cutting height (in the center, with a 500mm blade): 160mm - Main motor: 4kW - Table dimensions: 715x1070mm - Table height from base: 790mm - Roller tables: 2 pcs - Table dimensions: - Infeed length/width: 2000x640mm - Outfeed length/width: 2000x640mm - Machine dimensions (L/W/H): 1400x940x1070mm - Total weight: 480kg ADVANTAGES – 2 roller tables Dodpfx Aswtqbfsddecr – Hydraulic blade stroke – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on rate 4.2 EUR) (Prices may change due to strong fluctuations)

Condition: refurbished (used), LBL Brenta chipper CT 700 Max. Cutting depth = 150mm. Max. Cutting height = 650mm 9 blades Djdpfx Ajucp N Aeddjcr Free center disc, overheating protection Clearance = 800mm Fast, precise positioning thanks to servo motor

Condition: excellent (used), Catalog number 7707 Dcsdpfx Adew Edigjdjr TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)

Year of construction: 2021, condition: new, Wravor WRC 1050 max.cutting length 6,5m Dcsdpfx Adogyw R Sodsr We are also happy to configure a new log band saw according to your wishes.

Condition: excellent (used), Holtec package crosscut saw HF 121 1,9m cutting length Dcedpoufg Tdjfx Addjr

Condition: used, Schulte HB 12 horizontal log band saw -Roll diameter 1200 mm -Roll width 145 mm -Fully hydraulic tensioning carriage Dcedpowkpp Asfx Addjr -Carriage drive with cable winch

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs Dedpfx Adsv R Edqedocr -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: excellent (used), Log band saw system Band saw stand - Brenta 1500mm roll diameter Dcsdpfx Aofhl Snjddsr Band saw carriage Artiglio Eagle 1100 3 trestles With complete mechanization