Used Magnetic Chuck for sale (5,769)

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 Kjdpfstqfhxex Aanenf The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm Ksdpfx Aeqlgvhsansnf -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Condition: like new (used), functionality: fully functional, total height: 125 mm, outer diameter: 610 mm, hole spacing: 180 mm, Samchully 3-Jaw Chuck / HC-24 1x Standard Flange Kjdpfxjxzcq Ee Aansnf 3 x Soft Jaws 3 x Hard Jaws 1 x Wrench 1 x Grease Gun Specifications: Jaw Stroke Diameter: 16 Piston Stroke: 35 Max. Clamping Diameter: 610 Min. Clamping Diameter: 152 Permissible Maximum Input Force: 82 (8362) Maximum Static Clamping Force: 273 (27838) Max. Speed (rpm): 1760 Weight: 223 Moment of Inertia: 12.2 Max. Hydraulic Pressure: 3.2 (32.6) Hydraulic Cylinder (operation): Y-2035R(RE) Working Hard Jaw: HB18B2 KITAGAWA model: N-24

Condition: ready for operation (used), Steinert Electro Magnetic Drum Brand: Steinert Ksdpfju Tlr Iex Aanonf Dimension drum : Lenght 1300 mm , Ø 500 mm. Driving: 4 kW Gearbox. Power drum = 3 kW. Including new rectifier.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Knodpsvyuy Hjfx Aanof Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: excellent (used), electric magnetic chuck Make: Braillon Model: EPBJ Length: 1500 mm Width: 550 mm Height: 115 mm Knjdpextwu Nsfx Aansf Weight: 760 kg

Condition: good (used), ASSORTMENT / Soft - Hard Jaws for Three-Jaw Chuck / Base holder-tool holder / Sleeves / T-nuts -21x Set Soft Jaws (Special Jaws) Hard Jaws for Three-Jaw Chuck -Jaw dimensions LxW 120x60mm 60 degree - pointed toothing - 3mm tip distance -4x Base holders (CNC lathe) for holding boring bars and internal turning tools -20x Reducing sleeves (various internal diameters) for internal turning tools Knodpfx Aaswtbqdjnsf -Various T-nuts and screws -Remainder see pictures Errors / input mistakes excepted

Condition: used, A total of 3 sets of soft, pre-turned top jaws are being offered. The price listed above applies to one set of chuck jaws. ----- Jaw interface: Serration 1.5 x 60° Chuck types: Kitagawa; Howa; B210; BB210; other Asian manufacturers Chuck size: 10" approx. ø 250 mm For example: HOWA 10", Auto Strong 10" Slot N = 16 mm Width B = 40 mm ----- Picture no. = Item no. Pos.1) 8035_10_09 → €25.00 per set Pos.2) 8035_10_10 → €25.00 per set Pos.3) 8035_10_11 → €25.00 per set ----- # Order - Shipping costs / per set €9.00 ----- Kedpsk Un Siofx Aanenf Jaw dimensions: Width: 40 mm Height: 40 mm Length: 110 mm Hole spacing: La = 17+22 mm For fastening screws DIN 912 = M12 T-slot => N = 16 mm ----- T-nuts or other types of chuck jaws available on request.

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Kjdjxrmp Tjpfx Aanenf -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

Condition: used, Technical details: diameter: 200 mm Ksdpju Nk E Isfx Aansnf Torque: 2200 U/min weight of the machine approx.: ca.17 kg 3 jaws lathe chuck according Norm TGL 30-2332 *

Condition: excellent (used), Permanent magnetic chuck Magnetic plate Dimensions: 200 x 500 x 75 mm Knodpfx Aextmthjansf Weight: 60 kg (28673)

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg Knjdpfxexrlvle Aanof

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm three jaw chuck made of steel incl. chuck key Kedpfx Aju Nlatjanonf inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm on Sale with or without flange! i.D. *

Condition: excellent (used), Electromagnetic clamping plate (28490) Length 500 mm width 250 mm height 75 mm Knedpjtrngpsfx Aanef Voltage 90 Volt 0.4 Ampere Weight 58 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck Knjdjxrlt Repfx Aanef -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

Condition: used, Year of construction: 2006, Technical details: diameter: 430 mm passage: 197 mm width: 240 mm revolution per minute: 1500 U/min weight of the machine approx.: 237 kg Power chuck for EMAG No. 5875620 Kjdpfx Aaju Nlhwsnsnf features: automatic clamping Flanged bore inside Ø 186mm through hole Ø 197 x 64mm 3x clamping bolt M20x250mm Fmax: 5000 daN 2Set of forming jaws *

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate Kjdoxrlfgopfx Aansnf -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 130 mm -Bolt circle: Ø 75 mm -Hole: short cone 3, cone Ø 51 - 53 mm -Dimensions total Ø 130 x 50 mm -Weight: 1.4 kg

Condition: used, Technical details: Length: 400 mm Kedpfx Aaou N Dr Isnenf width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Magnet core 8 pieces width x distance: 40 x 45mm *

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 200 mm -Bolt circle: Ø134 mm -Hole: short cone 6, cone Ø 101 - 106 mm Knodpoxrk T Nefx Aanof -Dimensions total Ø 200 x 145 mm -Weight: 7.6 kg

Condition: used, Technical details: weight of the machine approx.: 8kg kg Ksdpju N Dw Dofx Aanenf dimensions L x W x H: Ø 160mmx 85 mm m Origin Germany Weight 10kg Ø 160mm x 90mm magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm Kodpfxju N Dy Se Aanjnf *

Condition: used, Technical details: Kodpovgbhqofx Aanonf diameter: 250 mm width: 80 mm revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key *

Condition: used, Technical details: diameter: 250 mm weight of the machine approx.: ca.31 kg revolution per minute: 3504 U/min 3 jaws lathe chuck - incl. 3 pcs of jaws external / internal Ksdpfju Nk D Rex Aanjnf *

Condition: used, Technical details: Knodpfx Aasu Nla Honjf diameter: 250 mm passage: Ø 80,0 mm width: 80 mm weight of the machine approx.: 18,0 kg dimensions: Ø 250 x B: 112 mm three jaw chuck made of steel flange intake Ø 210mm with 3 pcs drill hole M12x44 incl. 3 set of 3 jaws *

Condition: used, Technical details: diameter: 200 mm Kedpeu Nln Dsfx Aanonf passage: 50 mm width: 65 mm weight of the machine approx.: 45 kg stationary vice SSH 200 Power chuck, hydraulic Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws *