Used Magnetic Chuck for sale (5,959)

Condition: used, functionality: fully functional, Sine table with electromagnetic clamping plate 600x250x150 mm Psdpfxez Rwbve Airerc including control unit for 230 V (alternating current)

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Pedpfsxcimisx Airjrc

Condition: excellent (used), 1. Permanent-magnet chuck, D = 315 mm, with mounting flange according to DIN 55027, size 6. Prodsd Eaauepfx Airec

Condition: excellent (used), Sinus magnetic clamping plate, 380x150 mm, sine table/angle table Podpfszhrffsx Airjrc Manufacturer: Binder Magnete Type: 0011817C1 In very good condition.

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos Prsdpov U Nwiefx Airjc -Dimensions: Ø 275 x 115 mm Total weight: 30 kg

Condition: used, used, refurbished, 24V-magnetic chucks (flat and sinetable) with and w/o water-cooling in dimensions - 400 x 150 mm - 500 x 200 mm Prjdpfxoc Szv Do Airoc - 600 x 250 mm new wire and plug subject to prior sale

Condition: used, Magnetic chuck, permanent magnetic round chuck, magnetic clamp, magnetic chuck Prsdpfx Aieqfkkboroc -Magnetic chuck: Permanent magnetic round chuck chuck size Ø 305 mm -Hole circle: Ø 170 mm -Receptacle: short cone 8 / cone 135 - 139 mm -Weight: 54 kg

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 Pedpfxjxd Upfo Airerc -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck Pjdpfxown D Twj Airjrc -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Weight: 9.8 kg

Condition: used, length 900 mm width 505 mm height 110 mm Prsdpfx Aijwth Tfjroc weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9062

Condition: used, length 900 mm width 505 mm height 110 mm weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use Prodpfx Aezcgkyjirec condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9061

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg Pjdpjwth Trefx Airjrc We have two identical magnetic chucks with the same dimensions. See S9064

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Dimensions: 200mm x 200mm See our other ads Pedpjxc Ew Djfx Airjrc VMA Wekerom

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Prodpfx Aisxhfqnsrec Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: used, This listing is for the Hanna HI190M Magnetic Stirrer The unit is in full working condition and is ready for immediate use The Hanna HI190M is a compact and durable magnetic stirrer designed for efficient mixing in constrained lab spaces. Key Features Compact & Lightweight Design The device measures approximately 120 × 120 × 45 mm (4.8 × 4.8 × 1.8 in) and weighs between 610 g (12 V DC version) and 640 g (115 V version) Its small footprint helps free up valuable bench space Speedsafe™ Safety Mechanism This smart system prevents dangerous overspeed when the stir bar is suddenly removed, using an opto-sensor and a frequency-voltage converter to monitor and limit speed Adjustable Speed Range Offers stirring speeds from 100 to 1000 RPM, providing precise control over mixing Durable Housing The ABS plastic casing resists many chemical spills, enhancing longevity and safety Power Indicator LED A handy LED lets you know at a glance that the unit is powered on and operating Fuse & Grounding Protection Prsdpjxv Dvxefx Airjc The 115 V and 230 V versions include a replaceable fuse for short-circuit protection, and the case is grounded for additional safety

Condition: excellent (used), Three-jaw chuck, SMW power chuck, 250BB ----- Condition of the item: Good condition. Prodpfx Aiszlt Ezorjc Internal number: PS3

Condition: like new (used), functionality: fully functional, Hydraulic 3-jaw chuck, Samchully, Diameter: 450 mm and Hydraulic clamping cylinder Pede Afvaxjpfx Airsrc Type: Y-1550 RE. Sold individually or as a set!

Condition: excellent (used), outer diameter: 400 mm, Used hydraulic 3-jaw chuck from the Italian manufacturer SMW, model Autoblok 400BH. The set includes the parts shown on the attached photos: chuck, clamps, screws, and hard jaws Prodpfx Aijz Rlx Neroc

Condition: excellent (used), Year of construction: 1997, GUTH ENGINEERING stirred tank, 600 L pressure-resistant magnetic stirrer (MDB 550H) with heating jacket Tank volume: 600 liters Jacket volume: 55 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +5 bar Predpfx Aio Abapiorsc Manufacturer: unknown Year of manufacture: 1997 Space requirement: 140 x 105 x 215 cm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, 600 mm lathe chuck for sale, used only once. Hydraulic 4-jaw. Prjdpfxezgc Uzo Airoc

Condition: excellent (used), Item description: Pjdpfjzltzvsx Airorc Three-jaw chuck SMW power chuck HFK-N-260-72 ----- Condition of item: Good condition. Internal number: PS5

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Podoztplgopfx Airerc Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: used, Year of construction: 2023, grinding range 1000 mm Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Psdo Ad Rmqopfx Airerc

Condition: used, This listing is for 1 of 2 Stuart Scientific SM1 Magnetic Stirrer. Psdpoxv Dhujfx Airsrc The unit is in full working condition and is ready for immediate release. Dimensions: 180 / 280 / 90 Weight: 1.8

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,610 kg, Wagner Magnets – Non-ferrous metal separator / Eddy current separator – Type 0429/1-37/90/8 For sale is a used non-ferrous metal separator (eddy current separator) from the manufacturer Wagner Magnets. The machine was used in our recycling and processing plant and serves to separate non-ferrous metals, such as aluminum, from various material streams. Due to the restructuring and upcoming renovation of our recycling plant, the machine is being offered for sale. Technical data: Manufacturer: Wagner Magnets Machine designation: Non-ferrous metal separator Type: 0429/1-37/90/8 Equipment number: 542449 Order number: A 354429 Belt speed: adjustable from 0.5 to 2 m/s Weight of base unit: approx. 1,610 kg Discharge hood included Permissible ambient temperature: -20 °C to +45 °C Control: Type: 0428/1-25 FE Equipment number: 542450 Mains connection: 400 V / 50 Hz Recommended fuse rating: 25 A (slow-blow) Protection class: IP54 Weight: approx. 173 kg Drives: Rotor drive: 4 kW Belt drive: 1.5 kW Frequency converter for rotor and belt drive included Magnetic drum: Podpfsz R S D Tjx Airsrc Type: 0421N-30/85-02 A 1AL 15x20 Equipment number: 542449 Motor power: 0.55 kW Discharge hood: Weight: approx. 260 kg Condition and sale: The machine is in used condition and shows corresponding signs of wear and tear due to operation. An on-site inspection is possible after prior appointment. Technical documentation is available. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.