Used Main Spindle Motor for sale (37,019)

Condition: like new (used), Year of construction: 2022, power: 2.2 kW (2.99 HP), SEW Eurodrive KH77 DRN90L4/BE2/DI/DFC/IV Manufacturer: SEW Eurodrive Type: KH77 DRN90L4/BE2/DI/DFC/IV Serial Number: 01.8125801513.0001.22 Technical Data Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed [rpm]: 2900 Output Speed [rpm]: 33 - 1.6 Total Gear Ratio [i]: 88.97 Max. Torque [Nm]: 1,550 Output Torque [Nm]: 645 Service Factor SEW-FB: 2.40 Design: IM M1A ISO Designation: CLP 220 Lubricant Type: Mineral Oil Hnedpszrdg Nsfx Ah Sjt Lubricant Quantity [l]: 2.10 Motor Power [kW]: 2.2 / 0.11 Motor Rated Power [kW]: 1,500 Motor Frequency [Hz]: 100 Mains Rated Frequency [Hz]: 50-60 +/- 5% Supply Voltage [V]: 3x AC 380 -5% to AC 500 +10% Mains Rated Current [A]: 5.00 Output Rated Current [A]: 5.5 Duty Cycle S1-S10: S1 Adjustment Range (VT): 1:20 Motor Voltage [V] / Switching Mode: 230 Delta Motor Mains Frequency [Hz]: 50 cos phi: 0.74 Insulation Class [°C] / Protection Class [IP]: 155(F) / 54 International Efficiency Class: IE3 Motor Mains Efficiency [%]: 85.6 Efficiency at 50/75% Pn [%]: 84.6 / 86.1 Ambient Temperature Min. [°C]: -20 Ambient Temperature Max. [°C]: 40 Brake Voltage [V] / Brake Torque [Nm]: 400 AC / 10 Brake Rectifier: none Nameplate: German Weight: 78.00 kg SEW Eurodrive Gear Motors – Various Types Immediately Available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideally suited for use in machinery and plant engineering, in material handling technology, and for numerous industrial applications. Available Types: 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor Speed: 1,461 / 12 rpm Total Gear Ratio: i = 121.46 Max. Permissible Torque (Ma max): 8,000 Nm Output Torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Including Decentralized Inverter: DFC20A-0055-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 33 – 1.6 rpm Total Gear Ratio: i = 88.97 Max. Permissible Torque (Ma max): 1,550 Nm Output Torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total Gear Ratio: i = 57.28 Max. Permissible Torque (Ma max): 820 Nm Output Torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total Gear Ratio: i = 108.29 Max. Permissible Torque (Ma max): 600 Nm Output Torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Including Decentralized Inverter: DFC20A-0020-503-A-T00-001/B Motor Speed: 2,900 rpm Output Speed: 30 – 1.5 rpm Total Gear Ratio: i = 97.81 Max. Permissible Torque (Ma max): 200 Nm Output Torque: 177 Nm General Information Manufacturer: SEW-EURODRIVE Robust Industrial Quality Various Power and Torque Ranges Available Partially with Integrated Decentralized Frequency Inverter (DFC) Ideal as a Replacement Drive or for New Projects

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, AC motors for spindle speed and feed Chip conveyor No. 2 polygon milling/thread milling devices No. 1 broaching unit No. 1 threading unit No. 1 pick-up with retraction slide No. 1 deburring unit No. 1 rack milling device No. 2 wedge recesses No. 2 marking devices No. 1 carriage on 6th radial CNC axis (Siemens), with X and Z No. 2 sensors for length control of short, non-threaded or first of bar piece, with automatic discharge into bin at 4th and 8th station Giovanni Cucchi integrated bar feeder No. 1 bar elevator Tool holders Hnsdpjxyghfofx Ah Sot

Condition: used, TECHNICAL DETAILS - number of spindles : 8 - number of turning slides : 8 - number of longitudinal stations : 8 - maximum bar passage : round Ø 22 [mm] - maximum bar passage : hexagonal 19 [mm] - maximum bar passage : square 15 [mm] - max. bar feed length : 60 [mm] - number of spindle speeds : 20 - spindle speed : 620 to 6035 [rpm] - number of camshaft speeds : 24 - max. production : 1-50 [parts/min] - cross slide travel : 30 [mm] - max. independent feed stroke : 50 [mm] Hnjdpfx Ahouhap Do Set - main motor power : 10 [CV] - weight : 4,700 [kg] EQUIPMENT - counter-spindle with brake - counter-operation device - foot + barrel - IEMCA PRA 40/33F bar feeder - chip conveyor

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Hjdpfezk Nnpsx Ah Sont Storage location: 63934 Röllbach

Condition: excellent (used), Balestrini NOVA 3 envelope tenoning machine Main motors 2 x 2.2 kW Diameter of spindles 25 mm Spindles length 70 mm Spigot diameter 2 x 100 mm Hjdpfjvkcfrox Ah Sont Automatic material loading and discharge Workpiece length min/max 199.5 mm / 2030 mm Thickness of workpieces 100 mm Width 90 mm

Condition: new, Bernardo Universal Lathe Titan 660 x 3000 Technical Specifications Distance between centers: 3000 mm Center height: 330 mm Swing over bed: 660 mm Swing over gap: 900 mm Swing over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range: (16) 25 - 1600 rpm Longitudinal feed range: (25) 0.044 - 1.48 mm/rev Cross feed range: (25) 0.022 - 0.740 mm/rev Metric threads: (54) 0.45 - 120 mm Inch threads: (54) 7/16 - 80 TPI Tailstock quill diameter: 90 mm Tailstock quill travel: 235 mm Tailstock taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 4630 x 1200 x 1520 mm Approx. weight: 3300 kg Features • Versatile use in general mechanical engineering, production, single-part manufacturing, etc. • Central, user-friendly control for feeds and threading with leadscrew and feed shaft • Prism bed made of cast iron, inductively hardened and precision ground • Modern main spindle bearings with precision angular contact roller bearings • Hardened and ground gears and shafts, also in the feed gearbox • Rapid traverse longitudinal and cross as standard to reduce non-productive times • Large spindle bore (105 mm) for machining workpieces with large diameter • Smooth start-up via mechanical multi-plate clutch • Electromechanical foot brake to reduce non-productive times • Optimal cutting performance even during facing operations • Bed reinforced with robust ribs to stiffen the guideway and minimize vibration influences Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • Slip clutch • Rapid traverse longitudinal and cross • LED machine light • 3-jaw steel chuck PO3-315 mm / D8 • Face plate 450 mm • Fixed steady rest – through hole diameter max. 180 mm • Travelling steady rest – through hole diameter max. 120 mm • 2 live centers • Motor with magnetic brake to CE standard • Foot pedal with brake function to CE standard • Initial filling with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders Hnsdpfxsxxayfj Ah Sst • Safety device for quick-change tool post • Change gears • Reducing sleeve • Chip guard rear panel • Cable management via energy chain • Operating tools

Condition: used, Year of construction: 2025, Spindle tiltable: Yes, -5 to 45° Height adjustment: manual / handwheel Spindle stroke: 142 mm Tilting adjustment: manual / handwheel Fence adjustment: manual Height display: scale Tilting angle display: scale Hjdpoxrbihefx Ah Sjnt Milling fence display: scale Spindle diameter: 30 mm Spindle length: 140 mm Max. tool diameter: 250 mm Speeds: 3500 / 6000 / 8000 / 10000 rpm Motor power: 5.3 kW Motor brake: Yes, automatic Table size: 1000 mm x 520 mm Sliding carriage length: 1200 mm Extraction connection: 2 x 120 mm Machine length: approx. 1200 mm Machine width: approx. 900 mm Weight: 400 kg

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Motor brake: Yes Hedpfsy Sg Ncox Ah Sont Including feeder

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Hnsdpfjv Uvvfox Ah Sot Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill stroke: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed displayed on digital readout • Hardened and ground gears and shafts, including in feed gearbox • Standard with rapid traverse longitudinally and in cross for reduced non-productive times • Central, user-friendly feed and thread selection with leadscrew and feed rod • Oversized, hardened, and precision-ground gears • Simple, smooth, and precise speed and feed adjustment Hnjdpfoxl Tcmjx Ah Sst • One-piece cast machine bed, extremely torsion-resistant and low-vibration, ensuring essential prerequisites for precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Foot pedal with CE-compliant brake function • Coolant system • Frequency inverter • Overload clutch • Rapid traverse longitudinal and cross • Change gears • Reducing sleeve • 2 centres • Thread dial indicator • LED machine lamp • Chip guard at the rear • Operating tools

Condition: excellent (used), Felder F 700 Z Spindle Moulder 205 cm sliding table integrated in the worktop, Spindle adjustable in height and tiltable 0-45 degrees, Interchangeable 30 mm spindle, 7.3 kW motor, electric brake, Hnodpfjyn Iu Rsx Ah Set Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: Hedpfx Aozk Nw Rsh Sont Motor: 4 kW Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 1,000 rpm. Spindle height adjustment via handwheel Dimensions: 1200 x 80 x 1350 mm Wooden clamping jaws Includes Holz Her 3-roller feed unit and stand with chassis Availability: at short notice Location: Röllbach

Condition: new, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre distance: 1500 mm Centre height: 230 mm Swing diameter over bed: 460 mm Swing diameter over gap: 690 mm Swing diameter over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight approx.: 1845 kg Features - Modern main spindle bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including feed gearbox - Central, user-friendly control for feeds and threads with leadscrew and feed rod - Oversized, hardened and precision-ground gears - Simple, smooth, and precise speed and feed adjustment - Rapid traverse longitudinal and cross as standard to reduce non-productive times - One-piece, heavily ribbed machine bed for high torsional stiffness and vibration damping, providing the basis for accurate turning Hsdpfsxl Dyvsx Ah Sjnt Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. through-hole dia. 150 mm • Follow steady – max. through-hole dia. 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake conforming to CE standards • Foot pedal with braking function, CE compliant • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear wall • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx. 1145 kg Features • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, with set spindle speed displayed digitally • Prism bed made of grey cast iron, induction-hardened and precision ground • Central, user-friendly controls for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing arrangement with precision angular contact ball bearings • Standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including those in the feed gearbox • Simple, smooth, and precise adjustment of speed and feed settings • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout system ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity dia. 135 mm • Travelling steady rest – max. capacity dia. 65 mm • Foot pedal with brake function, CE compliant • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Indexing stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system Hnjdpfxjxl Tare Ah Sjt • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard (rear) • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range, 2 stages: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight: approx. 1325 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, selected speed displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and thread control with leadscrew and feed shaft • Modern main spindle bearings with precision angular contact ball bearings • Standard features include frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including in the feed gearbox • Speed and feed settings are simple, smooth, and precise to operate • Adjustable tailstock for taper turning, handwheel with fine scaling (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady – max. workpiece diameter 135 mm • Travelling steady – max. workpiece diameter 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter Hnodpfx Aexl Ta Sjh Sst • First fill with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 dead centres • Chip guard/rear screen • Operator tools

Condition: new, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications Distance between centers: 2000 mm Center height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (12 steps): 25 – 1700 rpm Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev Cross feed range (42 steps): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm Weight approx.: 1995 kg Features • Modern main spindle bearing assembly with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, ergonomic control for feeds and threads via lead and feed shaft • Large, hardened, and precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse (longitudinal and cross) as standard for reduced non-productive time • Machine bed cast in one piece, extremely torsion-resistant and low-vibration for high precision turning Hodpfexl Dzasx Ah Sjnt Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. diameter 150 mm • Travelling steady rest – max. diameter 110 mm • Quick-change toolpost with 4 holders • Safety device for quick-change toolpost • Motor with electromagnetic brake according to CE • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centers • Reducing sleeve • Thread-chasing dial • LED machine lamp • Chip guard at rear • Operating tools

Condition: new, Bernardo Universal Lathe Smart 410 x 1500 Pro Technical Specifications - Distance between centers: 1500 mm - Center height: 210 mm - Swing over bed: 420 mm - Swing over gap: 580 mm - Swing over cross slide: 255 mm - Bed width: 250 mm - Spindle bore: 52 mm - Spindle mount: DIN 55029, D1–6 - Speed range (16 steps): 45 – 1,800 rpm - Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev Hjdpfxoxl Dwuj Ah Sent - Cross feed range (17 steps): 0.025 – 0.85 mm/rev - Metric threads (42): 0.2 – 14 mm - Inch threads (45): 2 – 72 TPI - Tailstock quill diameter: 50 mm - Tailstock quill travel: 140 mm - Tailstock taper: MT 4 - Motor power: 3.0 / 4.5 kW - Machine dimensions (L x W x H): 2570 x 900 x 1600 mm - Weight approx.: 1,400 kg Product Features • Prism bed made of grey cast iron, induction hardened and precision ground • Electromechanical foot brake for reduced auxiliary times • Central, user-friendly control for feeds and threading with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Large-dimensioned, hardened and precision-ground gears • Hardened and ground gears and shafts, including feed gearbox • Simple, smooth, and precise adjustment of speed and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. capacity 135 mm • Traveling steady rest – max. capacity 65 mm • Coolant device • Four-way tool post • Safety guard for tool post • Micrometer longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread indicator dial • Motor with electromagnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 dead centers • Chip guard • Service tools

Condition: used, Year of construction: 1993, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine Hodpfxjrgt E Ro Ah Sent The scope of delivery regarding the tooling equipment could be different like pictures. *

Year of construction: 2002, condition: excellent (used), The Sedgwick spindle moulder is designed with a backward tilting spindle - 45 degrees with a forward tilting of 5 degrees. Motor Power 4kw 1.1/4" Spindle diameter Spindle length 140mm Hodozumtqjpfx Ah Sont Ex College Machine - Like New Year 2002

Condition: used, Technical specifications: Hodezd Efkjpfx Ah Sont Spindle diameter: 30 mm Spindle height: 160 mm Speeds: 3000/4500/6000/8000/10000 rpm Manual adjustment of spindle height Spindle lock Work table dimensions: 2570x840/1120x1670 mm Adjustable support arms Motor power: 4 kW Power supply: 400 V Overall dimensions: Length: 2570 mm Width: 840/1120 mm Height: 1670 mm

Condition: used, Tornos CNC-controlled multi-spindle automatic lathe Type/Model: Tornos MultiDeco 20.6 Condition: used Operating hours: 45,300 h Bar stock: Ø 5-22 mm Max. part length without secondary operation: 100 mm Max. part length with secondary operation: 80 mm Spindle rotation speed up to: 4000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Counter-spindle motor power: 1.1 kW Number of numerical axes: 17 Axial slide: 5 Cross slide: (radial and axial) 5 (Pos. 1 to 5) Facing slide: 1 CNC-controlled secondary operation slide with up to two secondary operation tools (Pos. 7) Connection value: 35 kW Dimensions (L x W x H): approx. 8053 mm x 1508 mm x 2210 mm Weight: approx. 8500 kg Equipment/Accessories: - Control system: Tornos PNC Deko - HIRTH - Gear cutting drum locking system Hedpfxszgwtxe Ah Sjnt - Spindle stop at Pos. 4 (activated via installation curves) - 2 quick-change drilling spindles XC06020.01; GWS Modular 40004; up to 80 bar - 3 fixed drilling units GWS Modular 40004; up to 80 bar - 7 base plates for tool holders GWS 60 AD60032 (Göltenbodt) - 7 base holders for turning tools GWS 60/41 (Göltenbodt) - Bar feeder integrated: TORNOS MSF 522/6 - Material guide channel for bar feeder - CO2 extinguishing system Kraft und Bauer - Oil treatment system Knoll: VRF 500/1550 - 2 high-pressure pumps, each 40 L/40 bar - 1 pump, 20 L/35 bar - Oil capacity approx. 2000 liters - Chip conveyor Knoll - No discharge chute

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Hnjdpfxsxbq Ulj Ah Set Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile . and other models second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 Hnsdpjvzghrsfx Ah Sot volt. 380/50 weight kg. 1000

Condition: new, Bernardo Production Lathe Goliath 500 x 2000 Technical Specifications Distance between centers: 2000 mm Center height: 250 mm Swing over bed: 500 mm Swing over gap*: 720 mm Swing over cross slide: 310 mm Bed width: 400 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range (24): 9 – 1600 rpm Longitudinal feed range (80): 0.063 – 6.43 mm/rev Cross feed range (80): 0.027 – 2.73 mm/rev Metric threads (46): 1 – 224 mm Inch threads (44): 1/8 – 28 tpi Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3520 x 1240 x 1550 mm Weight approx.: 3375 kg * Removable gap section: 200 mm Features Hedpfjxl D Aqox Ah Ssnt • Versatile applications in general mechanical engineering, production, single-part manufacturing, etc. • Machine bed cast in one piece is extremely torsion-resistant and low in vibration, providing the essential requirement for precise turning • Modern main spindle bearing with precision angular contact ball bearings • Central, user-friendly control for feeds and threads, with lead and feed screw • Rapid traverse for longitudinal and cross feeds as standard, to reduce auxiliary times • Large dimensioned, hardened, and precision-ground gears • Removable gap bridge allows machining of large-diameter workpieces • Sliding tailstock for taper turning, handwheel with adjustable fine scaling (0.02 mm) • Electromechanical foot brake to minimize non-productive time • Excellent machining performance also in facing operations Scope of delivery • Slip clutch • Rapid traverse, longitudinal and cross • LED machine lamp • 3-axis ES-12 V digital readout with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 400 mm • Fixed steady rest – max. passage diameter 200 mm • Traveling steady rest – max. passage diameter 110 mm • 1 live center / 1 revolving center • Motor with magnetic brake, CE-compliant • Foot pedal with brake function, CE-compliant • Initial fill with Shell Tellus 46 • Coolant system • Quick-change toolpost with 4 tool holders • Safety guard for quick-change toolpost • Reducing sleeve • Chip guard • Service tools

Condition: excellent (used), functionality: fully functional, DEMAG Hoist Unit P400 P600 P1000 total 24 items - Fine travel gear FG - Main hoist motor - Housing - Wire rope drum - Rope guide - Brake good condition, partly top used to like new Hnsdpfx Ajv Uvubjh Sst Info: 20,000 DEMAG spare parts and components in stock! demag parts ware house