Used Martin T72A for sale (90)

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68592, functionality: fully functional, type of input current: three-phase, Martin thickness planer in very good, used condition. T41 - Year of manufacture 1968 (?) Strip planing blade, Z4 The thickness planer was purchased from a dealer in 2018. The machine is being sold as part of the liquidation of our carpentry business. Pick-up price - delivery possible upon request. The sale is made with exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede. Crsdpfxeziuqtj Af Ajd

Condition: used, Martin T60c sliding table saw 5.5 kW motor, 430 cm carriage, Right-hand side adjustable with a motor to 840 mm, Max. blade diameter: 400 mm, Csdpfxszg U Hio Af Ajrd Tilt 0-45 degrees, adjustable with a motor, Blade height adjustable with a motor.

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Codpfx Afjxzfqbe Asrd Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: excellent (used), Catalogue number 7758 Crsdpozaa Tvjfx Af Ajd TECHNICAL DATA Circular Saw: - max saw blade diameter 350mm - spindle 30mm - lockable spindle - blade adjustable front/back, up/down, angle - blade guard - motor 1.1kW - extraction port diameter 80mm Milling Machine: - tenoning spindle: - spindle diameter 40mm - spindle working height 150mm - lockable spindle - max cutter diameter 350mm - 2 spindle speeds: 3000, 4500 rpm - motor approx. 5.5kW - brake - side carriage – manual feed - carriage dimensions (L/W): 1180x600mm - mitre fence - pneumatic clamp - extraction port diameter 125mm - dimensions L/W/H: 1750/2600 (for transport: 1200)/1400mm - weight 715kg ADVANTAGES – German-made – very good condition – used tenoner Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 1990, with Tersa cutter shaft Credpfx Afszg Nl Te Aod Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Machine no.: V 177666 GS-tested GS-tested for wood dust Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in current condition as inspected, without warranty

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, Weight: 1.500 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 Crjdpsxdlx Refx Af Aod - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tiltable - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter Credpfjqlck Nsx Af Ajd - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: Cedpfx Aoqlckpsf Aerd It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Cjdpfx Ast U Rn Ssf Aerd Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Crjdpfx Afepq If Dj Ajd Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 Codjpgkmwjpfx Af Ajrd T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m Cedpev Erkaofx Af Asrd T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2025, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately - Csdpfx Aew D T Dkof Ajrd

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks - Crodpfx Afjr Hr D Ns Ajd

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: Cedpoqlclbofx Af Aerd It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1995, condition: used, Prefeeder Automatic Fossaluzza complete with shuttle and loading roller conveyor Vacuum feeder + belts N 3 bottom printing units vacuum + belts Die-cutting unit Vacuum stacker with bundle output 1 Tenace braker, year 2011 Martin ball turntable 1 Martin braker Bundle flip flop Credozd Dymepfx Af Aed Palletizer Martin with sheet interlayer sheet feeder and pallet inserter

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Credpfx Afju Ix E Ho Aed Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: excellent (used), Angle adjustment Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Table length 240 cm Table width 35 cm Csdpfxewtl N De Af Aord Support extendable up to 80 cm Request more information

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Codpfszdknwsx Af Aerd

Condition: used, Year of construction: 2002, Sawblade tiltable 46 ° Length of the rolling table ~ 3.200 mm cutting width ~ 1.100 mm Cutting height max. 170 mm Saw blade diameter max 500 mm Motor output 5,5 kW Scoring unit 0,75 kW Martin T 73 Classic sliding table saw for precise cutting of solid wood, panel materials and coated materials with swivel saw blade and scorer. The machine enables precise rip, cross and mitre cuts and is designed for daily use in professional woodworking. Includes a comprehensive range of saw blades. Codpfx Afey Spv Es Ajrd

Condition: used, Year of construction: 1951, machine/vehicle number: 6886, turning diameter over bed:500 mm turning diameter over slide rest:300 mm turning dia. in gap:760 mm turning length:1100 mm centre height:250 mm feeds - cross:0,023 - 0,32 mm/U feeds - longitudinal:0,07 - 1,0 mm/U pitch thread:4 / 12 fach spindle passage:65 mm turning speeds:13 - 600 U/min Crodecxxq Uspfx Af Aod thread - mm pitch:0,5 - 84 mm thread - inch:0,375 - 14 inch. quill stroke:200 mm total power requirement:3 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,8 x 1,2 x 1,25 m with long. & lat. feed, 3-jaw chuck, diameter 380 mm; turning meter above bed without bridge 760 mm

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Tilting range: -5° to +45° Cjdpfx Afjy Ahplj Ajrd Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: V 453572, functionality: fully functional, operating hours: 1,770 h, power: 6 kW (8.16 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: AC, spindle diameter: 30 mm, pivoting range: 90 °, rip fence adjustment: motor-driven, actuation type: electric, rotational speed (max.): 9,000 rpm, rotational speed (min.): 3,000 rpm, table width: 900 mm, table length: 2,405 mm, total length: 3,000 mm, total width: 1,260 mm, total height: 1,800 mm, overall weight: 1,300 kg, year of last overhaul: 2026, Equipment: CE marking, Martin T26 DuoControl Spindle Milling Machine 5/6 kW (6.8/8.2 hp) - 400 V, 50 Hz with neutral conductor in CE configuration with 2-axis control for spindle height and milling fence, electromechanical swivel adjustment with digital display, incl. swiveling control panel with safety device type CPS Gamma V *with milling arbor 40 mm / 160 mm length //Table size: 2405 mm x 900 mm //Table height: 900 mm //Table openings: electric 70 mm - 220 mm //Weight: 1300 kg //Speeds: 3000/4500/6000/9000 rpm with belt quick-change system //Displays: electric speed display Digital (LED) for spindle height (absolute and relative) and swivel angle automatic display of the correction value for the milling depth Dual operating hour counter for total and batch run time //Milling spindle: electrically swiveling via push button +/- 45.50° electrically adjustable in height with rapid and creep feed, with steep taper SK 40, Dornfix quick-change system incl. torque wrench wear-free, electrically braked Electro-pneumatic locking via selector switch //Spindle stroke: Crjdpfx Afjzamwus Asd 150 mm at 5/6 kW and 7.5 kW, 125 mm //Milling fence: Aigner integral fence Milling jaws made of aluminum, hard-coated, with mounts for groove board or guide strip Handwheel adjustment with mechanical digital counter Infeed jaw adjustable separately Maximum WZ diameter 250 mm //Extraction: Extraction port 120 mm diameter on the milling fence Extraction port 120 mm diameter under the table //Maintenance equipment Central lubrication via pump Lubrication of the milling spindle via grease volume regulator 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil pump 1 x grease pump filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x arc milling guard FRS95 for milling operations on the guide ring, with extraction port and feed strip //Electrical equipment: Lockable main switch, automatic star-delta start, electric brake wear-free Contact for controlling the extraction, undervoltage protection, CEE torque connection for feed unit (= 5-pin socket) Operating push button for direction of rotation selection, motor circuit breaker and winding protection BG test certificate No. 991002 GS wood dust tested No. 991001 EC type-tested No. 991003 Additionally: 1 x Electrically adjustable table opening 1 x Support for feed unit mount, swiveling with motorized height adjustment with control panel 1 x extendable table extension

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Used Good condition Cleaned Functionally tested Overhauled Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Crjdpfszbc D Hjx Af Ajd Handover in the current condition as inspected Without warranty and guarantee.

Condition: good (used), Martin panel saw Sliding table: 170 cm Blade tilt and up/down adjustment: hydraulically controlled Motor: approximately 7.5 kW Maximum blade diameter: 450 mm Overall machine width when in operation: 380 cm Csdjy Uw Syjpfx Af Asrd Condition: good, the motor fan guard is missing, but the machine still functions properly.