Used Mazak Integrex 400 Iv for sale (358)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, MAZAK VCN 410A Nikken 5AX-201 rotary table, 5-axis in continuous mode except tilt, which is managed via the Nikken x21 remote control Table diameter: 200 mm Travels: 560 x 410 x 510 mm Bledoxvra Sepfx Addjr Table size: 900 x 410 mm 30-tool magazine Spindle: 12,000 rpm Chip conveyor

Condition: excellent (used), Year of construction: 2021, Mazak STX 2412 Fiber 3KW Manufacturer: Mazak Type: Super Turbo- X 2412 Fiber 3KW Year of manufacture: 2021 Condition: very good, used Blodpfxoxnpiuo Addor Switch-on hours: 9500h Cutting hours: 2800h Max. Workpiece size X-Y 1250 mm x 2500 mm Work table height 900 mm Axis travel X-Y 2520 mm x 1270 mm Axis travel Z 170 mm Rapid traverse speed Z 25 m/min Axis drive X1/X2 - Y Servo drive with ball screw Axis drive Z servo-driven Position accuracy X-Y +/- 0.01 / 500 mm Position accuracy Z +/- 0.01 / 100 mm Repeat accuracy X-Y-Z +/- 0.005 mm Cutting head With lens Focal length: 7.5'' Wall thickness Round tube Non-contact height sensing Operating status light Maximum sound level 80 dBA System weight 12,200 kg Structural steel O₂ 20 mm N₂ mild steel 6 mm Stainless steel 12 mm Aluminum 12 mm Galvanized 4 mm Brass 6 mm Copper 6 mm

Condition: good (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, Mazak VCN 510 C, year of manufacture 2005, Heidenhain iTNC 530 control, travel X/Y/Z 1050/510/510 mm, 30-position tool changer, SK 40 spindle taper, coolant through spindle 20 bar, table size 1300 x 550 mm, max. table load 1200 kg, chip conveyor, electronic handwheel. Bljdpfx Adjxu U R Rjdor

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, controller model: Mazatrol Matrix Nexus 2, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – Well-maintained, inspected & ready for immediate use For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained technical condition. The machine has undergone regular servicing and is in outstanding optical and mechanical shape. It is fully functional, thoroughly checked, and immediately ready for operation. The Mazak 530C stands out with its high-quality features, including a 4th axis, allowing complex workpieces to be machined precisely and efficiently, providing enhanced flexibility. Additionally, the automatic door offers increased user comfort, resulting in reduced setup times and increased safety during operation. The integrated coolant system (KSS unit) ensures optimum chip evacuation, which in turn leads to longer tool life and excellent surface finishes. Combined, these features deliver a powerful package focused on productivity, precision, and reliability. With our all-inclusive service package, we can personally handle the complete process upon request—from delivery to commissioning of your new machine. This includes unloading, placement, and precise alignment of the machining center. Thereafter, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and accurately. Blodpfx Adexu Hhzodsr We also offer tailored training programs for your staff so you can make optimal use of the machine from day one. Even after installation, we remain your competent point of contact—whether for maintenance, technical questions, or future upgrades. With our all-inclusive package, you have nothing to worry about—we ensure everything runs smoothly so you can focus completely on your production. Additionally, you can acquire extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units to make your production even more efficient and cleaner. Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specialized in Mazak machinery and other equipment. We place great emphasis on personal support and are happy to assist you any time, even after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. You are cordially invited to visit us and see for yourself the condition and functionality of the machine. With us, you are in the best hands—professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All specifications are subject to change without notice.

Condition: excellent (used), Year of construction: 2016, operating hours: 20,000 h, functionality: fully functional, controller manufacturer: Mazak, power: 6 kW (8.16 HP), laser hours: 20,000 h, laser power: 6,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 3,000 mm, table height: 1,500 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 20 mm, laser type: fiber laser, laser source manufacturer: IPG, actuation type: electric, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, We offer for sale a Mazak Optiplex 3015 Fiber laser cutting centre, 2 - 6 kW. Year of manufacture: 2016. Fiber/solid-state IPG source. 20,000 operating hours. Excellent condition, the machine is well-maintained and operated in a clean environment. Includes extraction unit. 2 interchangeable tables. Automatic nozzle change and calibration. Pierce, cutting, and plasma detection. Beam alignment camera. Fully functional, no known faults or issues. Operated in two-shift mode. Available for sale around January 2026. Bledpfoxfr Unox Adder

Year of construction: 2012, condition: ready for operation (used), Main Drive Laser power 2500 W Max Material Thickness Steel up to 20 mm Stainless steel up to 10 mm Aluminium up to 10 mm This Mazak MAZAK HTX510 was manufactured in 2012. A CO₂ laser cutting machine with a working area of 3000 × 1500 mm and laser power of 2500W. It can cut steel up to 20 mm, stainless steel, and aluminium up to 10 mm. Features include an automatic head and nozzle changer and a complete loading and unloading system. Consider the opportunity to buy this Mazak MAZAK HTX510 CO₂ laser cutting machine. Contact us for more information. Application Types Bedexirh Aepfx Addslr Cutting

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm Bodpfexmagujx Addslr turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle - Tool-Drive - C-Axis

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Bjdpfx Adsxnph Dsdjlr Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: used, Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 1,200 kg, total height: 2,900 mm, total length: 2,995 mm, total width: 2,350 mm, table width: 1,200 mm, table length: 550 mm, table load: 1,200 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 12,000 rpm, overall weight: 6,700 kg, coolant supply: 15 bar, CNC Vertical Traveling Column Machining Centre CNC Control Mazatrol 640 M Table size 1200 x 550 mm Table load 1200 kg Number of pallets: 1 x Movement X-axis 1020 mm Bledpfx Ajxnmg Roddor Movement Y-axis 510 mm Movement Z-axis 460 mm Spindle taper MAS BT 40 Spindle speed 35 - 12.000 1/min Spindle motor 22/15 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 11 kVA, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 16,024 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in well-kept, technically flawless condition. The machine has always been serviced regularly and is in very good visual and technical condition. It is fully functional, thoroughly inspected, and immediately ready for operation. With our all-inclusive service package, we personally handle the entire process for you upon request – from delivery right up to commissioning your new machine. This includes unloading, setting up, and aligning the machining center. Afterwards, our experienced service technicians will carry out professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C runs reliably and precisely. Bljdpfx Adjxuqrkjder We also offer customized training sessions for your employees, so you can utilize the machine optimally from day one. Even after installation, we continue to support you – whether with maintenance, technical inquiries, or future expansions. With our all-inclusive package, you don’t have to worry about a thing – we ensure everything runs smoothly so you can focus entirely on your production. Additionally, you can purchase extraction units, attachments, and accessories from us, including high-quality Donaldson extraction systems to make your production more efficient and cleaner. Our service commitment: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specialized in Mazak machines as well as other brands. We place great value on personal support and are happy to assist you at any time, even after your purchase. You are also welcome to visit and inspect the machine under power at our facility. You’re cordially invited to see the condition and functionality for yourself on site. With us, you’re in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All details without guarantee.

Condition: reconditioned (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 200-II MY Max. machining diameter: 380 mm Max. machining length: 538 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis Bedpjxlzp Iofx Addslr - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Machine Description: Control: Mazatrol Matrix Technical Data: Max. swing diameter mm 370 / 320 Max. machining diameter mm 344 / 210 Max. bar capacity mm 65 Travel - X1/X2 axis mm 207 / 141 Travel - Y1/Y2 axis mm 100 / 70 Travel - Z1/Z2 axis mm 760 / 815 Main spindle Speed range rpm 5,000 Main drive power (40% DC / 100%) kW 22 / 15 Spindle bore mm 76 C-axis degree 0.0001 Sub spindle Speed range rpm 5,000 Drive power (25% DC) kW 22 / 15 C-axis degree 0.0001 Tool turret with driven tools Number of stations 2 x 12 Tool shank height mm 25 Boring bar shank dia. mm 40 Driven tools Bljdpfoxtplgsx Addsr Speed rpm 6,000 Drive power kW 5.5 Machine weight kg 12,500 Machine dimensions (L x W x H) cm 351 x 281 x 248 Equipment/Accessories: Interface for bar feeder LNS Sprint 565 bar feeder Additional coolant nozzles at main and sub spindle Signal light (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece discharge device with conveyor belt C-axis on sub spindle 0.0001° High-pressure coolant system 70 bar Chip conveyor Mayfran Consep 2000 II, right-side discharge

Condition: used, Year of construction: 2000, operating hours: 42,362 h, functionality: fully functional, machine/vehicle number: 148417, overall weight: 8,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,000 mm, travel distance X-axis: 2,650 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 100 mm, controller manufacturer: Mazatrol, controller model: L-32B, working width: 1,250 mm, workpiece weight (max.): 300 kg, laser hours: 42,362 h, laser power: 1,500 W, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 12 mm, working length: 2,500 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 6 mm, laser type: CO₂ laser, actuation type: electric, Equipment: emergency stop, nozzle changer, Used Turbo X48 champion from 2001 located in Serbia. This laser cutting is equipped with a control unit Mazatrol L-32B and has a working area of 2500 x 1250 mm, laser power 1.5 kW. 42362 total hours on. Bledpoxl Sfyefx Adder Cutting capacity: -12mm mild -6mm stainless -3mm aluminium For additional pictures and videos of laser cutting in action feel free to contact me.

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Blsdpfjxnphkex Adder Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: used, Year of construction: 2001, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640 M, total height: 3,050 mm, total length: 7,109 mm, total width: 7,805 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 35 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 15,000 rpm, Horizontal Machining Centre with Palletech CNC Control Mazatrol Fusion 640M Pallet table size 500 x 500 mm Number of pallets 10x Table load 500 kg Movement X-axis 710 mm Bljdpfx Adoxnmgdodor Movement Y-axis 610 mm Movement Z-axis 660 mm Table indexing 360 x 1° Spindle Taper DIN 69871A Spindle speed 35 - 15.000 R/min Magazin capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2013, Movement Y-Axis Movement 510 Z-Axis Movement 580 Bljdpfx Adsxbulneder This 5-axis Mazak Variaxis i-600 was manufactured in 2013. It features a Siemens 840D control system, a table size of 600mm, and a spindle speed of 18000 RPM with a power of 35 kW. The machine offers a tool capacity of 40 and has spindle run hours of 1900. If you are looking to get high-quality milling capabilities, consider the Mazak Variaxis i-600 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1997, x-travel 1660 mm Bjdpfeh Hgmzex Addslr y-travel 760 mm z-travel 660 mm control Mazatrol M Plus table surface area 2000 x 760 mm table load 1,0 t rapid traverse 24 m/min turning speed range 7000 U/min power capacity - milling spindle 11 kW tool taper SK 40 | | no. of tools in the magazine 2 x 24 Stück weight of the machine ca. 8,1 t dimensions 4,2 x 3,2 x 2,8 m Vertical Machining Center traveling coloumn - internal coolant - chipconveyor - ext, hand wheel

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Options: Chip conveyor Renishaw RMP 60 15 bar coolant Air blow-off Performance package 8 MB memory expansion 2 additional M codes Central partition Portable handwheel 4th axis preparation Bjdpfx Ajwnbn Ssddslr 3-color lamp

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 17,500 h, machine/vehicle number: 604-171150, control type: CNC control, degree of automation: automatic, controller manufacturer: Mazak Fanuc, controller model: Mazak L64 Fanuc 160I-LB, laser type: CO₂ laser, laser source manufacturer: Panasonic, laser source model: YB-250A8N4e, laser hours: 17,500 h, laser power: 2,500 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 150 mm, pipe length (max.): 8,500 mm, overall weight: 25,000 kg, total length: 22,000 mm, total width: 6,000 mm, total height: 2,650 mm, TECHNICAL DATA X-axis travel: 8,750 mm Y-axis travel: 1,270 mm Z-axis travel: 370 mm U-axis travel: 9,300 mm V-axis travel: 2,515 mm Bjdpoxtud Uofx Addjlr A-axis: nx 360° B-axis: ±135° Control: Mazak L64 with Fanuc Series 160i/-LB Laser Type: YB-L250A8M4E Laser power: 2.5 kW Cutting head Type: 3D cutting head for tubes, profiles, and free-form parts Lens: 7.5” Material & Cutting Capacity Table load: 480 kg Max. workpiece length: 8,000 mm Max. round tube diameter: 150 mm Max. square tube dimensions: 150 x 150 mm Max. double-T beam / H-beam height: 120 mm Max. L-beam dimensions: 150 x 150 mm Cutting capacity (structural steel, 90° cut): up to 15 mm Cutting capacity (stainless steel, 90° cut): up to 8 mm Loading and Unloading System Loading/unloading length: 8 m (for profiles/tubes up to 8 m) Unloading axis stroke X for small parts: 725 mm MACHINE DATA Operating hours: 17,000 hours (Laser on) High Power Runtime: 8,000 hours Machine dimensions: 21,832 x 6,922 x 2,664 mm Installation dimensions: 22,109 x 7,215 x 3,204 mm Weight: 25,000 kg Connected load: 60 kVA Includes computer with Mazak FG-Cadcam 2020 series software for programming.

Condition: used, Year of construction: 2005, functionality: fully functional, Mazak Quick Turn Nexus 200 CNC lathe (2005) Manufacturer: Mazak Type: Quick Turn Nexus 200 Universal 500 CNC Lathe Year of manufacture: 2005 Mazatrol 640T control Condition: used, under power, in production Max. swing diameter 675 mm Max. turning diameter 380 mm Max. turning length 511 mm Speed range 35 – 5,000 rpm Main drive power 26 kW Max. torque 350 Nm Spindle bore 76 mm Number of tool positions 12 Rapid traverse X-axis 30.0 m/min Rapid traverse X-axis 30.0 m/min Tailstock mount MK5 Tailstock stroke 525 mm Number of tools 12 Turret indexing time 0.2s Length 2473mm Width 1780mm Height 1840mm Weight approx. 5000kg Scope of delivery – 1 set of manuals – Machine feet – Automatic parts catcher conveyor belt – Swarf conveyor hinge belt Blsdpfx Asxnngrsddor – Collet chuck – 6x tool holders – High-pressure pump 20 bar – Tool Eye – Bar loader prepared Note: without LTA oil mist extractor

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Table load 1400 kg Blodpfoxnlr Sox Addsr Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Electric spare parts Mazak Mazatech V-10 Complete electric cabinet and operating panel Control Mazatrol M32 Bledpfxextq N Ho Addjr Free loading onto truck Fixed price

Condition: good (used), Year of construction: 2008, turning length: 1,500 mm, turning diameter: 420 mm, Manufacturer: MAZAK Type: QTN 350 II MY Control: Mazatrol Matrix Nexus Year of Manufacture: 2008 Specifications Metric US Standard Max. Turning Diameter 420 mm X-Axis 257 mm Y-Axis 152 mm Z-Axis 1607 mm Spindle Bore 102 mm Speed 3300 rpm Spindle Power 30 kW Tool Changer 12-Speed Driven Tool Power 4000 rpm Driven Tool Power 7.5 kW Quill Mount 5 Mk Quill Stroke 200 mm Blsdpswaikxsfx Addjr Dimensions (Estimate) Length 5000 mm Width 2100 mm Height 2200 mm Weight 8600 kg Please note: The information on this page has been compiled to the best of our knowledge and belief, and where possible, by the manufacturer. This information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you review all important details.

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand MAZATROL Model Matrix Nexus Main Drive Spindle speed range 18000 Blsdpfxjxdn U Ij Adder Number of axis 3 Movement X-Axis Movement 730 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 730 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 740 mm Z-Axis Rapid Traverse 40 m/min Table Table load 500 kg Media Chip conveyor Yes Additional Equipment Chip conveyor CNC handwheel CTS 20 bar 40-position tool changer tool integrity sensor This Mazak NEXUS 5000 II was manufactured in 2007. It features a table size of 500 x 500 mm, capable of handling weights up to 500 kg. Equipped with a high-speed spindle at 18,000 rpm and a spindle motor power of 18.5 kW, it ensures efficient machining. Includes a 40-position tool changer and Mazatrol Matrix control for enhanced precision. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640 M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 1,300 mm, table length: 550 mm, overall weight: 8,900 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre Bljdjxnklwepfx Addor CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.