Used Mazak Nexus 6000 for sale (355)

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Cedpfxsxp Rywo Abzshd Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 41 kVA, controller model: Mazatrol Matrix Nexus 2, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 9,271 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in excellent, well-maintained condition, both visually and technically flawless. The machine has been regularly serviced and is in very good cosmetic and technical shape. It is fully functional, inspected, and immediately ready for use. The Mazak 530C impresses with its high-quality features, including a 4th axis that enables precise and efficient machining of complex workpieces, delivering greater flexibility. The automatic door provides added operator convenience, resulting in faster setup times and enhanced safety. Moreover, the coolant supply system (KSS unit) ensures optimal chip evacuation, which guarantees longer tool life and outstanding surface quality. All these features combine to deliver a powerful package designed for productivity, precision, and reliability. With our all-inclusive service package, we personally handle every aspect of the process for you upon request – from delivery to commissioning of your new machine. This includes unloading, installation, and alignment of the machining center. Subsequently, our experienced service technicians take care of the professional commissioning, carry out all necessary functional checks, and ensure that your Mazak VCS 530C operates reliably and precisely. We also offer customized training sessions for your staff so you can optimally utilize the machine from the very start. Even after installation, we remain available for ongoing support – whether regarding maintenance, technical questions, or future upgrades. With our all-inclusive package, you don’t need to worry about a thing – we make sure everything runs smoothly so you can focus entirely on your production. Additionally, we offer extraction systems, accessories, and add-on components, including high-quality Donaldson extraction units, to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians specializing in Mazak and other machinery. We place great emphasis on personal support and will continue to assist you after your purchase. You are also welcome to inspect and test the machine under power at our facility at any time. Feel free to visit and see the machine’s condition and performance for yourself on site. With us, you are in the best hands – professional, reliable, and passionate about machinery! Cjdpfexu Hhzjx Abzehd

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 3300 Measurements depth 4150 Measurements height 3100 Control Unit Model Fusion 640 M SK-40 Main Drive Spindle speed range 12000 rpm Movement X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 840 mm Tools Slots in storage 30 Media Chip conveyor Yes Additional Equipment Renishaw probe This 3-axis Mazak VTC 300C II was manufactured in 2002. It features a Fusion 640 M control, a spindle speed of 12000 rpm, and a tool magazine with 30 places. The machine dimensions are 4150mm in length, 3300mm in width, and 3100mm in height. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 300C II machine we have for sale. Contact us for further details regarding this machine. Application Types Chodpfx Aoxpkn Ijbzed Milling

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Misc. accessories Chsdpfxjxpugbe Abzed MARCELS MASCHINEN CH

Condition: used, For sale is a fully functional CNC turning machine. Video: available on request via WhatsApp Details & equipment: The machine can be inspected Year of manufacture: 2000 Fusion 640 control system Chip conveyor will also be included in the delivery at a later stage Machine documentation available Cedpfx Abew D T Txozehd If interested or if you have any questions, please contact us.

Condition: excellent (used), Year of construction: 2016, operating hours: 20,000 h, functionality: fully functional, controller manufacturer: Mazak, power: 6 kW (8.16 HP), laser hours: 20,000 h, laser power: 6,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 3,000 mm, table height: 1,500 mm, control type: CNC control, degree of automation: automatic, sheet thickness stainless steel (max.): 20 mm, laser type: fiber laser, laser source manufacturer: IPG, actuation type: electric, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, We offer for sale a Mazak Optiplex 3015 Fiber laser cutting centre, 2 - 6 kW. Year of manufacture: 2016. Fiber/solid-state IPG source. 20,000 operating hours. Excellent condition, the machine is well-maintained and operated in a clean environment. Includes extraction unit. 2 interchangeable tables. Automatic nozzle change and calibration. Pierce, cutting, and plasma detection. Beam alignment camera. Fully functional, no known faults or issues. Operated in two-shift mode. Available for sale around January 2026. Chsdpexfr Unofx Abzod

Condition: used, Year of construction: 2003, Max. Swing – 675mm Csdpev Rnuxofx Abzshd Swing over carriage – 350 mm Max. Machining dia. – 380 mm Max. Machining lenght – 538 mm X-axis travel – 230 mm Z-axis travel – 575 mm Spindle - Chuck size – 8” Spindle speed – 5000 rpm Turret w/12 stations Control: Mazatrol PC Fusion 640 T Equipped with: Barfeeder LNS Eco Load

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 11 kVA, workpiece weight (max.): 8 kg, total height: 2,808 mm, total length: 2,880 mm, total width: 2,929 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,800 kg, operating hours of spindle: 16,024 h, spindle nose: 150-660, tool length: 350 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Mazak Vertical Machining Center VCS 530C – well-maintained, inspected & ready for operation For sale is a Mazak VCS 530C vertical machining center in a well-maintained, technically flawless condition. The machine has always been regularly serviced and is in excellent condition both visually and technically. It is fully operational, inspected, and immediately ready for use. With our all-inclusive service package, we personally take care of the complete service for you upon request – from delivery to commissioning of your new machine. This includes unloading, positioning, and aligning the machining center. Our experienced service technicians then handle the professional commissioning, perform all necessary function checks, and ensure that your Mazak VCS 530C operates reliably and precisely. In addition, we offer tailored training for your staff so you can make optimal use of the machine from day one. Even after installation, we continue to support you – whether it involves maintenance, technical queries, or future upgrades. With our all-inclusive package, you don’t have to worry about a thing – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units, to make your production even more efficient and cleaner. Chedpjxuqrkefx Abzed Our service promise: For us, quality, expertise, and customer satisfaction always come first. Our team consists of qualified and experienced technicians who specialize in Mazak machines as well as machines from other manufacturers. We place great value on personal support and are happy to continue assisting you even after your purchase. You also have the option to view and test the machine under power at any time in our facility. You are warmly invited to visit us and see the condition and functionality for yourself. With us, you are in the best hands – professional, reliable, and passionate about machines!

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 15000 kg Control Unit Brand MAZATROL Model Smooth Main Drive Number of axis 5 Movement X-Axis Movement 630 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 1100 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 56 m/min A-Axis Movement -120° to +30° A-Axis Rapid Traverse 18000°/min C-Axis Movement ±360º C-Axis Rapid Traverse 18000°/min Tools Chedexp Sqqspfx Abzjd Number of index 40 Additional Equipment Equipped with Multiple-Surface / Simultaneous 5-axis Machining Center capabilities Features a Knoll 640 S-1 chip conveyor and Knoll KF400 coolant pump This 5-axis Mazak VARIAXIS i-700 was manufactured in 2017. Ideal for complex and precise machining tasks, this vertical machining centre ensures efficient multi-surface processing. Consider the opportunity to buy this Mazak VARIAXIS i-700 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: repair required (used), Year of construction: 1993, turning length: 520 mm, turning diameter: 180 mm, Max swing diameter (over bed): approx. 440 mm Max turning diameter: approx. 180 mm Max bar work diameter: approx. 51 mm X-axis travel: ~ 220 mm Z-axis travel: ~ 510 mm Spindle speed range: up to 4,500 rpm Spindle bore: ~ 61 mm Chodpfx Absxqzkcjzod Machine weight: approx. 4,300 kg Electrical power supply: ~ 400 V / 50 Hz Control: Mazatrol T-32 series Z axis servo control needs to be replaced Price includes robot Price includes tooling (U-drills, tool holders (mostly Sandvik), and accessories (jaws, etc.))

Condition: used, Year of construction: 2018, This machine will soon be in our warehouse! X- 350 mm Y- 550 mm Z- 510 mm Cjdjxl Rkzepfx Abzjhd A-axis -120° to +30° C-axis, table's rotation movement: ±360° Year: 2018-08 Working Time: 7190H Spindle motor: AC 11 kW (40% ED) Rapid feed X, Y, and Z axis: 30 m/min Tool magazine: 30 places Spindle taper: ISO 40 Spindle motor: AC 11 kW (40% ED) Spindle bearing inner/outer diameter: Ø 70 / 110 mm Speed range: 35-12000 rpm Max torque: 65 Nm (40% ED) Floor area of standard machine: approximately 1900 x 3060 mm Height of standard machine: approximately 2857 mm Weight: approximately 7000 kg Total circuit breaker: 37 kVA

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Machine Description: Control: Mazatrol Matrix Technical Data: Max. swing diameter mm 370 / 320 Max. machining diameter mm 344 / 210 Max. bar capacity mm 65 Travel - X1/X2 axis mm 207 / 141 Travel - Y1/Y2 axis mm 100 / 70 Travel - Z1/Z2 axis mm 760 / 815 Main spindle Speed range rpm 5,000 Main drive power (40% DC / 100%) kW 22 / 15 Spindle bore mm 76 C-axis degree 0.0001 Chedsxtplgopfx Abzjd Sub spindle Speed range rpm 5,000 Drive power (25% DC) kW 22 / 15 C-axis degree 0.0001 Tool turret with driven tools Number of stations 2 x 12 Tool shank height mm 25 Boring bar shank dia. mm 40 Driven tools Speed rpm 6,000 Drive power kW 5.5 Machine weight kg 12,500 Machine dimensions (L x W x H) cm 351 x 281 x 248 Equipment/Accessories: Interface for bar feeder LNS Sprint 565 bar feeder Additional coolant nozzles at main and sub spindle Signal light (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece discharge device with conveyor belt C-axis on sub spindle 0.0001° High-pressure coolant system 70 bar Chip conveyor Mayfran Consep 2000 II, right-side discharge

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 286964, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 2,000 mm, total length: 4,000 mm, total width: 2,500 mm, overall weight: 5,000 kg, TECHNICAL DATA & EQUIPMENT: Chjdpfoxm Swxox Abzsd Operating voltage: 400 V Frequency: 50-60 Hz Rated current: 46 A Connection load: 26.1 kVA Control: MAZATROL SMOOTH C The machine is equipped with a 12-position turret, a three-jaw chuck (diameter: 160 mm), a sorting unit with vibrator head by GRIMM, a chip conveyor, and a cooling system. NOTES ON COLLECTION: Collection must be firmly scheduled between December 10 and 12 FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 2016, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, controller manufacturer: MAZATROL, controller model: MATRIX 2, CONTROLS .. CNC controls MAZATROL MATRIX 2 Chedpjxm Rw Defx Abzjd WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 3000 mm .. Y-axis travel: 800 mm .. Z-axis travel: 720 mm .. rotating range B-axis up to: 220 ° .. rotating range C-axis up to: 360 ° TABLE .. table surface (left-right): 3500 mm .. table surface (front-back): 820 mm SPINDLE / HEAD .. spindle revolutions (max): 18000 /min .. tool fixture: ISO SK 40 .. drive power: 35 kW TOOL MAGAZINE .. number of positions: 155 further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 positions, diameter: 1,000 mm • Swarf Conveyor • 5-axis simultaneous machining package • auto pecking cycle with load detection • B) Cylindrical interpolation • G00 slope constant • B) synchronized MillTapp

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 4210 Measurements depth 6900 Measurements height 3400 Machine weight 21500 Control Unit Brand MAZATROL Model SMOOTH G Main Drive Spindle speed range 10000 Number of axis 4 Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 980 mm Z-Axis Rapid Traverse 60 m/min Workpiece Workpiece X 1050 mm Workpiece Y 1300 mm Chodjxmlkxepfx Abzed Table Min distance between vertical spindle and table 100 mm Max distance between vertical spindle and table º1000 mm Table load 1500 kg Tools Max weight 30 kg Max tool diameter 125 (250) mm Max tool length 630 mm Additional Equipment Chip Conveyor Tool Presetting Air Blow on the Spindle Remote Handwheel This 4-axis Mazak HCN-6800 horizontal machining center was manufactured in 2016. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this Mazak HCN-6800 horizontal machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2021, Mazak STX 2412 Fiber 3KW Manufacturer: Mazak Type: Super Turbo- X 2412 Fiber 3KW Year of manufacture: 2021 Condition: very good, used Switch-on hours: 9500h Cutting hours: 2800h Max. Workpiece size X-Y 1250 mm x 2500 mm Work table height 900 mm Axis travel X-Y 2520 mm x 1270 mm Axis travel Z 170 mm Rapid traverse speed Z 25 m/min Axis drive X1/X2 - Y Servo drive with ball screw Axis drive Z servo-driven Position accuracy X-Y +/- 0.01 / 500 mm Position accuracy Z +/- 0.01 / 100 mm Repeat accuracy X-Y-Z +/- 0.005 mm Cutting head With lens Focal length: 7.5'' Wall thickness Round tube Non-contact height sensing Operating status light Maximum sound level 80 dBA System weight 12,200 kg Structural steel O₂ 20 mm N₂ mild steel 6 mm Chedpfx Aexnpiuebzjd Stainless steel 12 mm Aluminum 12 mm Galvanized 4 mm Brass 6 mm Copper 6 mm

Condition: good (used), functionality: fully functional, controller model: CNC Mazatrol, number of slots in tool magazine: 24, Equipment: documentation/manual, MAZAK Yamazaki VTC 20 B Vertical CNC Machining Center Model VTC-20 B Used CNC Control MAZATROL M-32-B MAZATROL conversational programming EIA/ ISO programming function including interface for reader-punch unit MAZAK Monitoring System C AFC TBR TLM Adaptive feed control Tool breakage monitoring (only under Mazatrol) Workpiece service life monitoring and replacement tool call function Complete coolant system Flood coolant Coolant and chip protection Drum-type tool magazine for 24 tools Synchronous thread cutting Csdpfjw Rmu Iox Abzehd 24-position tool magazine Tool length measurement device Monitoring System B M-function with feedback M-function Inspection under power is possible by appointment. All technical data subject to errors or misprints. Price upon request Sale exclusively within EU countries only.

Condition: used, Year of construction: 2001, functionality: not functional, The issue is that the machine takes a very long time to start up. Year: 2001 Control unit: Mazatrol Fusion 640 MT Axes: 5-axis (X, Y, Z, C, B) Turning capacity: Maximum turning length: 1,500 mm Maximum turning diameter: 660 mm Maximum swing over bed: 700 mm Main spindle: Maximum speed: 4,000 rpm Spindle motor power: 22–30 kW Chuck size: 10” or 12” (depending on configuration) Milling spindle / B-axis head: B-axis travel: ±240° Y-axis travel: ±70 mm Maximum milling speed: 12,000 rpm Tool taper: HSK-63 or BT-40 Tool magazine: 40-position automatic tool changer (ATC) Maximum tool length: 300 mm Maximum tool weight: 8 kg Equipment included: Tailstock Steady rest Coolant system Chip conveyor Fully enclosed guarding Machine weight: approx. 12,000–13,000 kg Csdpsxt R Dkofx Abzjhd

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Options: Chip conveyor Renishaw RMP 60 15 bar coolant Air blow-off Performance package 8 MB memory expansion Cjdpfx Aewnbn Sobzehd 2 additional M codes Central partition Portable handwheel 4th axis preparation 3-color lamp

Condition: used, Year of construction: 2019, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, controller manufacturer: MAZAK, controller model: SMOOTH G, CONTROLS .. CNC controls MAZAK SMOOTH G WORKING RANGE -CUBIC- .. X-axis travel: 1000 mm .. Y-axis travel: 530 mm .. Z-axis travel: 510 mm TABLE .. table surface (left-right): 1300 mm .. table surface (front-back): 500 mm .. workpiece load (max): 1200 kg SPINDLE / HEAD .. spindle revolutions (max): 12000 /min .. tool fixture: ISO SK 40 AXIS DRIVES .. feed velocity (max): 8000 mm/min .. rapid traverse: 42000 mm/min TOOL MAGAZINE .. number of positions: 30 Chjdpfx Asxm Rwdobzjd ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes

Year of construction: 1996, condition: ready for operation (used), General Data Measurements width 1950 mm Measurements depth 2800 mm Measurements height 1950 mm Machine weight 5300 kg Main Drive Spindle speed range 3500 rpm Spindle bore 80 mm Number of axis 2 Codpfx Aexmbwhobzohd Movement X-Axis Movement 200 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 1020 mm Z-Axis Rapid Traverse 25 m/min This Mazak QT30 was manufactured in 1996. A robust horizontal turning machine featuring a max turning length of 950 mm, diameter of 320 mm, and spindle bore of 80 mm. It supports bars up to 70 mm and offers spindle speeds up to 3500 rpm. Dimensions: 2800x1950x1950 mm, weight 5.3 t. For more information about this machine, please reach out to us. Application Types Turning

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) Cedoxnph Dopfx Abzjhd PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: used, Year of construction: 1990, turning length: 440 mm, turning diameter: 440 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, total height: 1,800 mm, overall weight: 4,300 kg, bar passage: 51 mm, bar diameter (max.): 51 mm, controller manufacturer: MAZATROL, controller model: T32-2, number of spindles: 1, space requirement length: 2,500 mm, space requirement width: 2,600 mm, CONTROLS .. CNC controls MAZATROL T32-2 BASIC FUNCTIONS .. number of spindles: 1 .. number of turrets: 1 .. live positions: no WORKING RANGE TURNING .. swing diameter (max): 440 mm .. turning diameter (max): 225 mm .. bar diameter (max): 51 mm .. worpiece length max.: 440 mm MAIN SPINDLE .. spindle revolutions (min): 45 /min .. spindle revolutions (max): 4500 /min .. spindle diameter: 61 mm X/Z SLIDE .. rapid traverse Z: 30000 mm/min .. rapid traverse X: 30000 mm/min .. tool fixture: Turret .. number of tool positions (total): 12 Cedpoxm Rtxofx Abzohd X SLIDE .. X-axis travel: 220 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2500 mm .. space requirements -front/back-: 2600 mm .. total height: 1800 mm .. total weight approx.: 4300 kg ATTACHMENTS (TURNING) .. tailstock: yes .. chip conveyor: no .. coolant unit: yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 2,446 h, General Data Measurements width 3485 mm Measurements depth 4424 mm Measurements height 3442 mm Machine weight 11500 kg Control Unit Brand MAZATROL Model 640M Chsdpfxoxn U E Ue Abzod Main Drive Spindle speed range 40 - 12000 Number of axis 3 Movement X-Axis Movement 1740 mm Y-Axis Movement 760 mm Z-Axis Movement 660 mm Table Outer length 2000 mm Outer width 760 mm Table load 1400 kg This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 4700 Measurements depth 8600 Measurements height 3550 Machine weight 27000 Control Unit Brand MAZATROL Model 640 M-PC Main Drive Spindle speed range 10000 Spindle motor power 29.8 kW Tool taper SK 50 Number of axis 3 Movement Cedpsxg Upqjfx Abzshd X-Axis Movement 3000 mm Y-Axis Movement 1480 mm Z-Axis Movement 640 mm Tools Slots in storage 60 Media Chip conveyor Yes This 3-axis Mazak FJV 60/120 vertical machining center was manufactured in 2001. It offers robust capabilities for precision machining. If you are looking to get high-quality milling capabilities, consider the Mazak FJV 60/120 machine we have for sale. Contact us for more information. Application Types Milling