Used Mazak Qtn 250 for sale (365)

Condition: used, Year of construction: 2008, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm Dodpsyhp A Ajfx Afpekh table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm Dkedsyhm Rwopfx Afpeh

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MSY Max. turning diameter: 380 mm Max. machining length: 511 mm Dkedpfxjyhwy Io Afpsh Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for secondary spindle, diameter 169 mm - Tool Eye - C-axis - C-axis on sub-spindle - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Dksdjtuggcspfx Afpeh Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) Dedowngklopfx Afpekh GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min Dksdsvc Avbspfx Afpjh rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: good (used), Year of construction: 1998, Mazatrol T-Plus control Max. turning diameter: 470 mm Max. swing diameter: 575 mm Turning length: 1,500 mm Spindle speed: 3,000 rpm Magazine for 40 tools (KM 63/SK 40) B-axis Y-axis Steady rest Tailstock Dkjdeyg Ru Depfx Afpsh Chip conveyor

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40 Dkedpsyhcviefx Afpoh

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm Dkodpfxsyg N Shj Afpjh size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A Dsdpfx Ajx Hwgusfpjkh - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,050 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. Dodpfx Afex Enlrjpekh • Tool magazine: 30 positions • Control: Fusion • Table size: approx. 1300 × 550 mm • Cooling: 15 bar internal (through-spindle) pressure Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing Dkedpfx Asx Enllsfpjh • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: MATRIX 2, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information. Additional equipment • workpiece and tool probe Dkodpsygtq Uofx Afpeh • mist extraction • oil separator Machine Benefits Technical Machine Benefits • Cooling through spindle pressure: 15 bar • Number of pallets: 2 • The machine is in very good technical condition. Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings Dkjdpfx Aex D R Svefpjh • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h Djdpfx Afjydvfcepokh turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: MAZATROL, controller model: 640M Nexus, number of axes: 4, This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information. • B-axis rotation: 360° • Table size: 500 x 500 mm • Permissible load: 1,000 kg • Tool magazine: 120 positions • High pressure coolant: 70 bar Additional equipment Dsdpoygl Ncefx Afpekh • Chip evacuator (chip conveyor) Technical Specification Taper Size ISO 50

Condition: excellent (used), Year of construction: 2018, MAZAK QUICK TURN 100MSY Max. turning diameter: 280 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 42 mm The machine is equipped with: Dodpfjygi A Hex Afpokh - Mazatrol SmoothG CNC control - KITAGAWA 3-jaw chuck for main spindle, diameter 169 mm - KITAGAWA 3-jaw chuck for secondary spindle, diameter 135 mm - Tool Eye - C-axis - C-axis on sub-spindle with 0.0001° resolution - Y-axis - Automatic parts catcher - Signal light (3-color LED) - Reinforced coolant pump - Chip conveyor - Standard MAZAK tool package

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: PC-FUSION-CNC, total height: 2,650 mm, overall weight: 11,500 kg, This 4-axis Mazak FH-4800 horizontal machining center was manufactured in 2002. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Mazak FH-4800 horizontal machining center. Contact us for more information about this machine. Additional equipment • Tool Capacity: 64 positions • Maximum Tool Diameter: 150 mm /Maximum Tool Length: 375 mm/ Maximum Tool Weight: 12 kg Dedpfxex D Ihus Afpekh Machine Benefits Technical Machine Benefits • Rapid traverse rate (x/y/z): 50 m/min • Pallet size: 400 mm x 400 mm • Number of pallets: 2 / pallet indexing: 1° increments / maximum load capacity per pallet: 400 kg • Spindle taper: iso 40/ spindle speed range: 0 – 12000 rpm • Spindle motor power: 22 kw (30 min)/ 15 kw (20 min) /11 kw (continuous) • Distance from spindle center to pallet top: 50 – 660 mm Extra Information In the last 3 years, they changed the spindle, servo, encoder, motor, cover.. More than 40k to keep the machine in good condition. Dimensions Machine Depth 4200 mm

Condition: like new (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, Machine: Mazak Quick Turn 200 MSY with bar feeder / loading magazine Year of manufacture: 2019 The machine has already been packed for shipment to Taiwan according to the highest standards for international sea freight. A demonstration by a Mazak electromechanical technician is possible at any time; in that case, we would simply need to unpack the machine on site again. The machine is currently located at a factory of a now-closed facility in Baden Württemberg. Inspection appointments: Calendar week 10. Control: Mazatrol SmoothG Max. turning diameter: 695 mm Max. swing diameter: 575 mm Distance between the chucks (both spindles): 575 mm Travel distances X-axis: 234 mm Y-axis: 100 mm Z-axis: 575 mm W-axis: 585 mm Rapid traverse X/Y/Z/W: 30/21/33/30 m/min Main spindle Drive power: 26 kW Max. spindle speed: 5,000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Max. bar capacity: 65 mm Sub spindle Drive power: 11 kW Max. spindle speed: 6,000 rpm Dksdpfxsygbcfj Afpsh Turret 12 tool stations (VDI type) 12 driven stations Milling drive power: 5.5 kW Max. speed: 5,000 rpm Additional options / equipment Tooleye Parts catcher Interface for bar feeder C-axis on main and sub spindle Coolant supply through sub spindle Air at the turret Engraving function Cylindrical interpolation Clamping force control Thread re-cutting function Preparation for oil mist extraction Mahle coolant filter Chip conveyor (Mayfran) High-pressure pump 15 bar

Condition: refurbished (used), Year of construction: 2007, CNC FANUC EZ, travels X axis 4200 mm, Y axis 1400 mm, Z axis 585 mm, A axis ±40 degrees, B axis ±40 degrees, table 4000 x 1250 mm, spindle 10,000 rpm HSK 100, power 27 kW, tool magazine for 60 tools. Machine can be viewed in operation and is available immediately. Djdeyh Hcqspfx Afpokh

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640 M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 1,300 mm, table length: 550 mm, overall weight: 8,900 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre Dodpeygw Ecjfx Afpokh CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool Djdpfx Afox Rkvqopekh ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, total height: 2,933 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, tool weight: 8,000 g, product length (max.): 2,570 mm, number of axes: 5, This 5-axis Mazak CV5-500 vertical machining center was manufactured in 2023. It features a maximum spindle speed of 12,000 rpm, a dual-stage electric gear, and a rapid traverse rate of 36 m/min in X, Y, and Z axes. The machine supports a table load of 200 kg and includes a 30-position automatic tool changer. Ideal for complex, multi-axis precision machining. Contact us for more information about this machine. • Electrical load • Apparent power (40% duty): 45.5 kVA • Permanent apparent power: 43.4 kVA Dkjdpfxjyf H Tys Afpsh • Electrical connection: 3-phase AC 380/400/415/440/460/480 V ±10%; 50/60 Hz ±1 Hz • Pneumatics • Pressure: 5–9 bar • Flow rate: 26 l/min • Air blow-off through spindle: 345 l/min • Spindle • Spindle nose: Steep taper 40° • Gear stages: 2-stage (electric) • Rated power (AC inverter motor): 18.5 kW (10% duty), 15.0 kW (25%), 11.0 kW (40% and continuous) • Max torque: 119.4 Nm (10%), 95.5 Nm (25%), 70.0 Nm (40%); continuous 57.3 Nm • Axes, feeds, rapids • Number of simultaneously operating axes: 5 • Rapid traverse X/Y/Z: 36 m/min • Rapid traverse B/C: 30 min⁻¹ • Feed rates X/Y/Z: 36,000 mm/min • Table • Diameter: 500 mm • Tapped holes: M16 × 2 • Reference bore: Ø50 mm H6 (+0.016 / −0.000 mm) • Workpiece capacity • Max diameter: 500 mm • Max height: 320 mm • Travels / Working area • B-axis swivel/indexing: 220° (±110°), 0.0001° • C-axis swivel: 360° • Distance spindle nose – table top (horizontal): 50–520 mm • Distance spindle nose – table center (vertical): 95–565 mm • Automatic tool changer • Tool positions: 30 (optional magazine: 48) • Selection: Random, shortest path • Tool holder: MAS BT 40 or SK 40 • Pull bolt: Yamagaxi ANSI type • Max tool diameter: 80 mm (adjacent occupied) / 125 mm (adjacent free) • Max tool length: 300 mm • Tool change time (chip-to-chip): 4.60 s • Tank capacities • Guideway/ballscrew lube: 1.80 l • Hydraulic oil: 5.0 l • Spindle coolant: 26.0 l • Option: 18,000 min⁻¹ spindle coolant (oil tank): 60 l • Total tank capacity: 320.0 l Additional equipment • Monitoring/sensing package • Analog inputs: 4 × 0–10 V • Digital inputs: 8 • ACC-SENSOR.1AXIS.10M: 1‑axis accelerometer with 10 m cable • Active power sensor (Dimensions: 8105 × H85 mm) • Toolscope IP for DIN rail Rev.4 • Industrial PC functionality in the control cabinet • Communication and control via HMI • PM: Tool and process monitoring • Tool breakage detection • Self-learning wear limit • Fixed and dynamic tolerance bands • Process performance monitoring strategy • Collision monitoring with all Goliog • DIN rail mounting in the control cabinet • Dimensions: 812 × H90 × D62 mm • Documentation including Toolscope • Chip conveyor (dimension reference provided: machine width 3,365 mm including chip conveyor)

Condition: used, Year of construction: 2008, Ma.-No. 204412, Control Mazatrol Matrix Nexus, travel X/Y/Z 260 x 150 x 1,605 mm, max. spindle speed 3,300 rpm, max. spindle bore 102 mm, max. turning diameter 420 mm, max. turning length 1,500 mm, 12-position tool turret with driven tool stations, tool holder VDI 50, max. speed 4,000 rpm, operating hours approx. 81,940, three-jaw chuck, hydraulic steady rest, make SMW Autoblok, tailstock, tool measuring system, chip conveyor, make Mayfran, type QTN300M, tool and accessory package. PCB defective! +++ Note: Machine is part of an online auction! +++ Dkjdpfoyffxhsx Afpsh

Condition: used, Year of construction: 2011, Ma.-No. 327233239, control unit Mazatrol Matrix 2, travel paths X/Z 450 x 150 mm, main spindle, sub-spindle, 2x 8-position tool turrets with driven tool stations, tool holder VDI 40, 2 spindle units, max. spindle speed 5,000 rpm, max. machining length 530 mm, max. spindle bore 51 mm, tool measuring system, operating hours approx. 34,987, gantry loader, make Mazak, type Flex-GL100F, conveyor belt, L 6,000 mm, workpiece table, belt filter unit, make Knoll, type KF 400, chip conveyor, make CROMAR, tool and accessory package +++ Note: This machine is part of an online auction! +++ Dkjdjyffvtopfx Afpeh