Used Mazak Variaxis 500 for sale (363)

Year of construction: 2011, condition: ready for operation (used), Laser power: 4kW, laser type: CO2, laser model: YB-L400A 8M, wavelength: 10.6µm, pulse mode: N/P, max. beam diameter: 22.5mm, power stability 8h: +/-2%, gas consumption: approx. 30l/h, travel X/Y/Z: 3260mm/1545mm/430mm, max. workpiece dimensions X/Y/Z: 3050mm/1545mm/25mm, max. table load: 915kg, machine dimensions X/Y/Z: approx. 8000mm/2900mm/2600mm, weight: approx. 14200kg, control: Mazatrol Preview M, operating hours: approx. 31105h, documentation available. On-site inspection is possible. Fodpfx Afjyifl Hjpefu

Condition: good (used), Year of construction: 2007, Used Mazak Machining Center X-axis travel: 1,740 mm Y-axis travel: 760 mm Z-axis travel: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min rating): 18.5 kW Main drive power (30 min rating): 11 kW Tool changer: Number of stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent stations empty: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg Fsdpfx Aoyfmz Djfpefu Control: Mazatrol 640M Interfaces: RS232, LAN, floppy disk drive Dimensions & Weight: Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Included: Various tools + Renishaw probe Documentation/manual Chip conveyor Partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar A complete, very good machine, immediately available!

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Tool cabinet and cutting tools not come. Only tool holders will come. Ffsdpfex Atyajx Afpju

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. Fsdpjxawctofx Afpjfu We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. If you have any further questions, we are happy to assist you.

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Ffodovdkdiepfx Afpju

Condition: used, Year of construction: 1991, Mazak SQT 10MS lathe for sale. The machine is fully functional and in good condition. Technical specifications: Max. turning diameter 230 mm Main spindle Speed range 35-6,000 rpm Main drive power 11 kW Secondary spindle Drive power 5.5 kW Speed range 180 - 6,000 rpm Fedpfx Afov Tbu Depjfu Indexing 72 positions/5 ° Tool turret Number of tool positions 12 Driven tools Speed range 120-3,000 rpm Drive power 2.2 kW Travel paths X-axis 160 mm Z-axis 455 mm B-axis 460 mm Travel speed Feed range X/Z-axis 0 - 5,000 mm/min C-axis 1 - 2,000 °/min Machine data (with standard equipment) Total connected load 43 kVA Machine weight, . 3,500 kg Machine dimensions (L x W x H), approx. 2.70 x 1.70 x 1.85 m Accessories Tool presetter (MAZAK Tool Eye System) C-axis Dual foot switch for opening/closing the chuck Chuck status feedback (open/closed) Front door lock Complete coolant system Work area lighting Documentation

Condition: ready for operation (used), Year of construction: 2015, A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible. Ffjdpfx Afjx Ih Dmopeu

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible. Fedpjvnd Sujfx Afpsfu

Condition: ready for operation (used), Year of construction: 1998, A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible. Fedpfx Afsxfvicjpofu

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Ffsdotx Dn Uopfx Afpju

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1500mm/800mm/660mm, spindle speed: 10000rpm, table dimensions X/Y: 1740mm/750mm, tool capacity: 30, taper type: BT50, control: Mazatrol M-32, weight: approx. 11000kg. Fodpfx Afjtpp H Nopsfu

Year of construction: 2005, condition: ready for operation (used), Distance between centers: 1000mm, turning diameter: 350mm, speed: 4000rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/1900mm, weight: approx. 4500kg, control: Mazak Mazatrol 640. Including tool measurement system and chip conveyor. Documentation available. On-site inspection is possible. Expected to be available from May 2026. Ffodpfxeygmc Rs Afpsu

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible. Ffodjtx Dpfopfx Afpju

Year of construction: 1992, condition: ready for operation (used), Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible. Fsdoyhgpajpfx Afpofu

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Fjdpsx Aunxsfx Afpsfu

Year of construction: 2001, condition: good (used), Data will follow... Ffjdpfxoydni Ho Afpju

Condition: reconditioned (used), Year of construction: 2004, Used 3-axis machining center Mazak Nexus 410A Year of manufacture: 2004 Control: Mazatrol 640M Worktable: Table size: 900 x 410 mm Max. table load: 500 kg T-slots: 3 Distance between T-slots: 125 mm Slot width: 18 mm Travel paths: X-axis: 560 mm Y-axis: 410 mm Z-axis: 510 mm Rapid traverse: X/Y/Z axis: 36 m/min Feed rate: 1 – 8,000 mm/min Working spindle: Speed range: 35 - 12,000 rpm Main drive power: 18.5 kW Tool magazine: Number of tool stations: 30 Max. tool diameter: 80 mm - with adjacent positions free: 125 mm Ffsdpfxeyg Hx So Afpou Max. tool length: 350 mm Max. tool weight: 8 kg Machine data: Total connected load: 33.1 kVA Machine weight: approx. 5,100 kg Machine dimensions (L x W x H): approx. 2.10 x 2.60 x 2.80 m STANDARD ACCESSORIES: Complete coolant system - Flood coolant - Through-spindle coolant Coolant and chip guard Chip and coolant protection by fully enclosed working area Work area lighting Chip conveyor, ejection to the side The machine can be inspected by appointment in Willingshausen. We can load it. Technical data, accessories and description of the machine are non-binding.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,415 h, travel distance X-axis: 425 mm, travel distance Z-axis: 600 mm, overall weight: 4,500 kg, controller manufacturer: MAZATROL, number of axes: 2, This Mazak QTC 100 MSL horizontal turning machine was manufactured in 2021. Ideal for versatile machining operations. Consider the opportunity to buy this Mazak QTC 100 MSL horizontal turning machine. Contact us for more information. Additional equipment • Collet chuck; 2x 3-jaw chuck • Includes bar loader Machine Benefits Ffedpfx Afex Nr T Iopsu Technical Machine Benefits • Known defects: none known • Mounting diameter : 68mm Extra Information Machine still under powerThrough hole diameter: 52mm

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. Ffjdpfx Afjx D I A Sjpeu • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Fsdpfx Aeyh I Tdsfpjfu Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX 300-3ST Year of manufacture: 2004 Control system: Mazatrol 640 CNC-Steuerung Machine's weight: 14.200 kg Tool holder: Capto C6 Ffsdpsyh I Rvefx Afpeu x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: used, Year of construction: 2003, Pallet size 400 x 400 mm X/Y/Z movements.- 560/630/600 mm Spindle taper ISO 40 No of tools in tool changer 80 pcs. Pallet indexing 0,001 deg. Fsdpfx Aoxfcc Njfpsfu Control: Mazatrol PC Fusion 640 M Equipped with: 2 extra pallets Various tool holders

Condition: ready for operation (used), Year of construction: 2016, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 980 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1000 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 30-37 kW; 350 Nm; ISO 50 - DIN PALLET: N.2 ; 0,001° ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg Ffsdpfox H U Nasx Afpju MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1300 mm HIGH PRESSURE COOLANT: 50 Bar TOOL MAGAZINE: CHAIN-TYPE ; 120 POS MAX TOOL DIAMETER: 125 (250) mm MAX TOOL LENGHT: 630 mm MAX TOOL WEIGHT: 30 Kg CONTROL UNIT: MAZATROL SMOOTH G WEIGHT: 21500 Kg OVERALL DIMENSIONS: 6900 x 4210 x 3400 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; THROUGH-SPINDLE AIR BLAST ; PORTABLE HANDWHEEL NOTE: TOUCH PROBE RENISHAW 60

Condition: excellent (used), Year of construction: 1989, I am selling a CNC lathe Mazak QuickTurn 20N. Lathe in bdb condition. Equipment: MAZATROL T-2, control MAZATROL CAM-T-2. Ffjdpfou U R E Aox Afpou

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery Fsdpfx Afeyb S Nrspsfu if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!