Used Mb 322 for sale (44,615)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 960 h, Additional Equipment Thickness of the product to be processed, min/max: 8 / 200 mm Main Drive: Feed speed, min/max: 3.5 / 18 m/s // Feed motor power: 2.2 Kw (3 HP) // Vacuum motor power: 11 Kw (15 HP) Possibility to adjust the height of the grinding roller with the help of a thickness indicator Automatic stop of the sander in the event of an accident Automatic oscillation of the grinding belt with electronic control Direction of movement of the inclined belt is opposite to the feed of the workpiece Length of the bevel tape: 2620 mm // Width of the inclined belt: 1370 mm // Grinding roller diameter: 320 mm // Rubberized sanding roller hardness: 30 Sh // Speed of the inclined belt: up to 18 m/s Kedpfx Aaex D Na Ssnefa Pneumatic switch for extremely precise positioning of the sanding roller Slanted belt blower with electronic oscillation // Electric motor power: 11 Kw (15 HP) Inverter for adjusting the speed of the sanding belt (from 3 to 18 m/s) This DMC MASTERBRUSH MB 1350 M4 woodworking machine was manufactured in 2011. It features a control computer with a 10.4'' LCD color touch screen, a vacuum motor power of 11 Kw, and a feed motor power of 2.2 Kw. The machine can handle product thicknesses from 8 to 200 mm and speeds up to 18 m/s. Ideal for precise woodworking tasks, the DMC MASTERBRUSH MB 1350 M4 machine we have for sale. Contact us for further details. Application Types Sanding

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 460 mm Travel Z-axis: 460 mm Spindle speed range: 50 - 15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Tool magazine: 32 positions MACHINE DETAILS Control: OSP-P200M Main drive motor: 22 kW Dimensions & Weight Required space (L x W x H): 2,850 x 2,810 x 2,750 mm Machine weight: 7,200 kg EQUIPMENT Chip conveyor Kodpfx Ajx I Ecyeanjfa Internal coolant supply Standard filtration unit

Condition: used, Year of construction: 2007, control Fanuc 21i-TB turning speeds 4.500 U/min x-axis 205 mm z-axis 580 mm greates pass round over bed 550 mm swing diameter over support 300 mm number of tool places 12 Pos. bar passage 65 mm auto power on hours ca. 56.433 h spindle hours ca. 23.981 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Kedpox Ik T Djfx Aanjfa Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Code: 0198 Brand: SCM TECNOMAX Model: MB 21 - CE Standard Multiple boring machine with 21 spindles for furniture, custom-made furnishings, kitchens, bathroom furniture, panels and various - CE Standard Technical data: 21 quick-release spindles Spindle centre distance mm 32 Worktable height mm 900 Worktable dimensions mm 905 x 372 Max tool diameter mm 40 Max drilling centre distance mm 640 Max drilling head stroke mm 70 Motor power Kw 1,8 Min/max panel thickness 10/85 mm Manual movement for tilting the operating unit N°2 pneumatic clamps Side guide with stops Compressed air 6 bar Overall dimensions mm 1000 x 800 x 1300 h Weight kg 273 Kodpfx Aaoxbpbqonjfa

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - Kfjdpfju R Tftjx Aanea This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: good (used), geared motor, electric motor -Speed: 61 rpm Kfsdpfxsb A Rnds Aanoa -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 24 mm -Brake: 24 V -Protection class: Tropical resistant -Weight: 15 kg

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4710 mm Measurements depth 2700 mm Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50 to 15000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Ksdjx D Rriepfx Aanofa Tools Max weight 10 kg Max tool diameter 70 / 150 mm Max tool length 300–450 mm This 4-axis Okuma MB 5000H was manufactured in 2011. It features a robust horizontal machining center design with a 500 × 500 mm pallet size, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min⁻¹ with a SK40 taper, enhancing its versatility. Additional features include a chip conveyor, shower system, and provision for a Renishaw probe. If you are looking to get high-quality milling capabilities consider the Okuma MB 5000H machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Kfodpfx Aajrwxz Ronoa Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Kfsdpex A Hczefx Aanoa Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: used, mileage: 5,79,000 km, power: 440 kW (598.23 HP), first registration: 01/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: mechanical, loading space length: 7,200 mm, loading space width: 2,500 mm, Year of construction: 2013, Equipment: ABS, air conditioning, crane, parking heater, MAN TGS 32.440 / 8x2 PLATFORM 7,20 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2013 ? MILAGE: 579 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 720 x 250 (L x W ) CAPACITY: 18 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 180/410/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB 322 E - 7 HIPRO + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR Ksdpfox Hczqox Aanefa * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, mileage: 1,04,144 km, power: 65 kW (88.38 HP), first registration: 10/2018, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,870 mm, loading space width: 1,650 mm, loading space height: 1,380 mm, Year of construction: 2018, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, No. 78 – You can find this and many other Mercedes-Benz transporters on our website: — Mercedes-Benz Vito 109 CDI Long, 3-seater, first-owner vehicle, with a full service history. Valid main inspection and emissions test (TÜV) until 02/2027. The vehicle is wrapped in grey, original paint color underneath is white. Last service at 90,000 km including replacement of front and rear brakes. —— Service intervals at 22,000, 38,000, 65,000, and 90,000 km. — Known defects: - Radio display defective. Music plays, buttons are functional. - Aftermarket reversing camera not working. - Only 1 key available. —— All-weather tires. Permissible total weight: 2,800 kg Kerb weight: approx. 1,900 kg Payload: approx. 900 kg Emission standard: EURO 6 Wheelbase: 3,200 mm Cargo area dimensions (approx. in cm): 287 x 165 x 138 VIN: WDF44760313491521 Warranty available subject to additional payment — 1st owner, service history, TÜV until 02/27, brakes recently replaced — Cruise control — Shelving system in cargo area — Wooden floor in cargo area Kjdox Izcispfx Aansfa — Bluetooth hands-free system — Driver and passenger airbags — 3 seats — 2-way front speakers — Hill-start assist — Service interval indicator ASSYST — Electric windows — Central locking — Subject to errors, changes, and prior sale — Optional equipment: Audio system Audio 10, wooden cargo area floor, 2-way front speakers Other features: Third brake light, adaptive brake light, passenger airbag, driver airbag, traction assist/hill-start assist, trailer coupling: electrical wiring for trailer socket, both exterior mirrors aspherical, exterior mirrors mechanically adjustable from inside (both sides), outside temperature display, fixation rails for roof rack, brake assist, braking system with ABS + ASR, roof lighting in cargo compartment, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: Crosswind Assist, windshield with antenna, 185A alternator, 6-speed manual gearbox, cup holders front and rear, belt tensioner, passenger hand grip, lockable glove compartment, body/chassis: standard van, body/chassis: long, fuel tank: 57 L main tank, full partition wall, load securing/tie-down points, engine: 1.6 l – 65 kW CDI CAT, rear fog lamp, wheelbase 3,200 mm, Euro 6 low emission, sliding side door right/load/passenger compartment, seatbelt system with warning (driver/passenger), seat covering/upholstery: Rawson fabric, cab seats: twin bench passenger seat, 6.5x16 steel wheels, window pillar trim, hardboard half-height side trim in cargo/passenger compartment, lashing rails on upper sidewall of cargo area, ASSYST service interval indicator, permissible total weight 2.8 t.

Condition: good (used), Reflective light barrier, light barrier -Type: WL 25-322 Ksdpfjb A Hzaex Aanefa -24 V AC 48-62 Hz 6 VA -Weight: 2 kg

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50–15,000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm Kfsdpfex D Rrcjx Aanoa X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Tools Max weight 10 kg Max tool diameter 70 mm / 150 mm Max tool length 300–450 mm Type of tool holder BT40 This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Ident No.: 2287997 Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Kfodpfxjx A Imho Aanea Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Motor speed: 4400 rpm Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Condition: used, Year of construction: 2009, functionality: fully functional, We offer a used fat frying line with filling station from Opelka. The line is fully functional and has an hourly output of approximately 1,600 pieces at a frying time of 6 minutes. The filling station is equipped with gear pumps. Kfjdpsx Nat Aofx Aansa If you have any questions, please feel free to contact us...

Condition: new, Schneider Automation TSX A250 ALU 154 CPU, 4 MB Modnet1/SFB, E status and serial no. according to photo,unused in opened original box, 100% working, scope of supply according to photos Kodpfx Aaei Ec H Eensfa

Condition: used, Year of construction: 2011, machine/vehicle number: 149002, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, controller manufacturer: OSP, controller model: P200, table width: 500 mm, table length: 500 mm, The Okuma MB 5000H 4-axis machine was produced in 2011. It features a robust horizontal machining center design with a 500 x 500 mm pallet, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min-¹ with an SK40 taper for increased versatility. Additional features include a chip conveyor, a shower system, and provision for a Renishaw probe. If you're looking for high-quality milling capabilities, consider the Okuma MB 5000H machine we have for sale. Kfjdpfx Aajx I Nwnenoa

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m Kfodpfoxrwpdox Aanoa max. table loading capacity: 500 kg

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 6900 kg Measurements height 2750 mm Kedpfox D Dvbex Aanjfa Measurements depth 3000 mm Dimensions Machine Length 2550 mm Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Z-Axis Movement 460 mm Y-Axis Movement 560 mm This 3-axis Okuma MB-56VB vertical machining center was manufactured in 2005. It features a working surface of 1300 × 560 mm, a maximum table load of 900 kg, and rapid feed rates of 40 m/min in X/Y and 32 m/min in Z. The spindle operates up to 12,000 rpm with a power of 20 kW. Tool magazine holds 32 tools. If you are looking to get high-quality milling capabilities consider the Okuma MB-56VB machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, FEIN Support Grinder Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Motor power: 350 Watts Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition Kodpfx Aajx A Imbonjfa

Condition: used, mileage: 2,08,237 km, power: 129 kW (175.39 HP), first registration: 02/1993, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, total width: 2,500 mm, total height: 3,700 mm, loading space length: 4,000 mm, loading space width: 2,360 mm, loading space height: 590 mm, Equipment: ABS, all wheel drive, crane, Mercedes Benz all-wheel tipper with crane MB 1717 AK Atlas 100.1 * First registered 02/1993, * Mileage 208237 km according to the meter reading, * 5958 cc with 129 kW 175 HP * 8-speed manual transmission, * Driver's cabin with 2 seats, * Tire size 12 R 22.5, profile 9-18 mm, * Total weight 18000 kg, empty weight 9550 kg, axle load front 6700 kg rear 11500 kg, * ABS, radio, differential lock, power steering, mooring chocks, * Dimensions in length x width x height 6700 x 2500 x 3370 mm, * Crane Atlas 100.1 range 12m 600kg, max 1.9m 5000kg, * 3 side tipper 4000 x 2360 x 590 steel side walls Kjdpfx Aasqxcmtonofa further details and additional pictures available on request, this description does not represent a binding offer and may contain errors, no guarantee for all information

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Kfsdsxhdz Eepfx Aanja Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Year of construction: 2020, condition: used, New: Yes Kedpfxsx I Epas Aansfa Please contact us for more information.

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 890 mm Measurements depth 788 mm Measurements height 939 mm Machine weight 180 kg Main Drive Kedpfjx D H Nwjx Aanefa Number of axis 3 This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information. Application Types Measuring

Condition: new, Year of construction: 2020, Water Tank MB 32 Standard configuration includes:    • Swivel drawbar eye    • Hydraulic support leg    • Side connection on the left, blind flange on the right    • Braked ADR axle    • Tyres 500/50/17    • Galvanised tank    • 6" Perrot couplings    • Tank capacity: 3,167 litres    • Pump capacity: 4,000 litres/min    • Tank diameter: 110 cm    • Total length: 530 cm    • Total height: 200 cm    • Axle thickness: 60 mm    • Brake drum: 300x60 mm    • Complete with suction hose, PTO shaft and spray nozzles    • Including registration Condition: New Kfsdpfx Aasx I Envenoa Year of manufacture: 2020