Used Mco for sale (514)

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: Prodpfx Aju Szfueahsc 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Pedpfexmkcajx Aahsrc

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader Pedpeunzgrsfx Aahsrc condition see pictures

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Predjdctnbspfx Aahjc Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: excellent (used), EMCO TURN 365 – CNC Turning Center Prodpfx Aoxiy Ukeahsc For sale: EMCO TURN 365 CNC turning center, in excellent technical condition, immediately available and ready for operation. Year of manufacture: 2000 EMCO Turn 368/65 Operating hours: 53,000 Year: 2000 Chip conveyor Drip tray Maximum swing diameter over bed [mm]: ø600 Swing diameter over cross slide [mm]: ø360 Maximum turning diameter [mm]: ø310 Maximum workpiece length [mm]: 520 Maximum bar capacity [mm]: ø65 Distance between centers (spindle nose – tailstock center) [mm]: 669 X-axis travel [mm]: 210 Z-axis travel [mm]: 610 AC motor power (Sinumerik / Fanuc) with integrated holding brake [kW]: 24.4 / 22 Spindle speed range (stepless) [rpm]: 60 – 3200 Max. torque (Sinumerik / Fanuc) [Nm]: 267 / 242 C-axis (rotary axis) on main spindle Rotary axis resolution [°]: 0.001 Rapid traverse speed Siemens / Fanuc [mm/min]: 1000 / 100 Automatic tailstock, hydraulically actuated Tailstock travel [mm]: 500 Max. tailstock force [N]: 8,000 Travel speed [m/min]: approx. 20 Tailstock quill taper: MT 4 Disc turret with directional logic, optionally with driven tools Number of tool stations: 12 Tool holders according to DIN 69880 VDI 30 Tool cross-section for square tools [mm]: 20 × 20 Boring bar diameter [mm]: ø32 Number of driven tool stations: 12 Speed range [rpm]: 0 – 5,000 Max. drive power [kW]: 5 Max. torque [Nm]: 20 • Control: Sinumerik 810D/840D (ShopTurn 6.4) • Machine weight: approx. 4,000 kg • Installation dimensions (L × W × H): approx. 4,000 × 2,000 × 2,000 mm — Condition & Scope of Delivery The machine is in very well-maintained condition. The offer includes comprehensive documentation including operator’s manual. • Inspection possible at any time • Free loading • Delivery by arrangement possible — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices subject to VAT. Errors and alterations excepted.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-STRUCTURE) Control and Motors: HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measurement systems, and handwheel) Prsdexc Hphepfx Aahsc IKZ: Internal coolant supply, 20 bar Additional equipment: Tool changer with double gripper, 60 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 measuring probe Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm Prsdpfxeu N Avxe Aahsc pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: ready for operation (used), Year of construction: 2005, operating hours: 25,217 h, General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Prjdpfxoxfcrde Aahoc Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes General Data Measurements width 3400 mm Measurements depth 2550 mm Measurements height 2300 mm Machine weight 8500 kg Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 280 mm, X-Axis Rapid Traverse 24 m/min Y-Axis Movement 100 mm +/-50 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement Z/Z2/Z3=900/750/750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece X 744 mm Table Tslots size VDI40 Turret Number of turrets 2 Number of tool slots 12 Motorized tools VDI40 stations (both upper and lower turret) Media Power consumption 46 kVA Internal cooling Yes This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us. Application Types Turning

Condition: ready for operation (used), EMCO TURN 332MC. Year of manufacture: 2005. Includes - LM 1200. Accessories included. Prodsxgumispfx Aahjc

Condition: excellent (used), Year of construction: 2019, HYPERTURN 65-1300 (SM2Y2) DUOTURN with 2 turrets incl. milling drive and 2 Y-axes High-performance CNC turning/milling center for complete machining of turned and milled parts, with 1300 mm spindle distance; Integrated spindle motors (ISM) on main and sub spindle (liquid-cooled), preloaded roller guides. Drive power: Main spindle - 29 kW Sub spindle - 29 kW Speed range: Main spindle 0 – 5000 rpm Sub spindle 0 – 5000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 Predjw T Apgspfx Aahoc (max. bar capacity ø 65mm) Sub spindle: KK6 Y-axis in both turret slides: • Travel range: +/- 50 mm Includes: • Hollow clamping cylinder including draw tube • Parts ejector and coolant flush through the sub spindle • Sinumerik 840D-sl/OPERATE control o emcoNNECT/APP-based operating interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN conversational programming o USB interface o Network drive / Ethernet o 3D simulation o and much more. • 2x 12-station tool turrets VDI 30, radial with directional logic for up to 2x 12 live tool stations! Swivel speed adjustable with the feed switch. o Performance data: o Max. 6.7kW at 2650 rpm o Constant torque 25 Nm o Speed range 0–5000 rpm o C-axis for main and sub spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1200mm (hinged belt type) • Coolant system integrated in the chip conveyor 2x process pumps 14 bar (turrets) 1x rinse pump 4.8 bar (main spindle / working area) 1x rinse pump 3.7 bar (sub spindle) • Control cabinet air-conditioning unit • Hydraulic unit • Machine lamp • 230 V power socket at control panel • 5 leveling elements • Documentation Including: Bürener Maschinenfabrik: chip conveyor Various accessories Year of manufacture: 2019

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 5030SC-158, Technical data Psdsim H R Dspfx Aahsrc Manufacturer: Cimcore Type: Infinite 5030 SC Year of manufacture: 2006 Certificate date: 05.05.2014 Serial number: 5030SC-158 Opric sensor: perceptron ScanWorks V4 Further data on request. The machine can be modernized with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer! Note: Our offer is intended exclusively for professional customers! (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved!)

Condition: good (used), Year of construction: 2006, functionality: fully functional, FORMCCOK CONTACT COOKER MODEL: CC618 PERFECT WORKING CONDITION Predpfx Aast Sg Txjhec

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! * Pjdsvvtpxspfx Aahorc

Year of construction: 2014, operating hours: 100 h, condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 4500 mm Measurements height 1800 mm Machine weight 2200 kg Control Unit Brand FANUC Model 31t- Model B Controller Brand FANUC Model 31i B Main Drive Spindle speed range 5000 Number of axis 3 Workpiece Workpiece weight 4.5 kg Additional Equipment Automatic bar loading magazine with adjustable part length and bar diameter Remnant extraction system Guide channel made of polyurethane plastic Prjdpsxbul Usfx Aahec Displacement system for longitudinal movement This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm Pedpfx Aaewz Idtshjrc -Weight: 327 kg

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Prodpsw Tg Adofx Aahsc Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Working Range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Pedpew U Ac Njfx Aahorc Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, quill stroke: 100 mm, quill travel distance: 100 mm, total height: 2,120 mm, total width: 2,220 mm, total length: 2,150 mm, overall weight: 2,550 kg, As-new Emco FB6 milling machine (conventional) for sale. Podpoxga Sdefx Aaherc We purchased the machine in 2018 from a training workshop and have used it for only about 15 hours since then. (We acquired a 5-axis machining center for angular work...) We are selling the machine due to lack of space. The machine is in perfect condition and ready for immediate operation. Age-appropriate signs of use. The machine was manufactured in 2011. All technical details can be found in the attached photo. All tool holders shown in the photo are included, excluding the rack and the collets installed in the machine. The dividing head on the table is not included either. You are welcome to inspect the machine. For buyers from Switzerland, 8.1% VAT will be added to the price.

Condition: used, Year of construction: 1990, Technical details: x-travel: 185 mm y-travel: 95 mm z-travel: 200 mm control: emco tronic TM02 spindle taper: SK 30 range of revolution per miute: 10 - 4000 / steples U/min feed continuous: 1 - 2000 / steples mm/min. rapid traverse: ca. 3,0 m/min tool turret - number of stations: 10 interface: R 232 table surface area: ca. 420 x 125 mm Predpfxjvc Awro Aahjc total power requirement: 0,8 kW machine dimensions LxWxH: 2,1 x 0,9 x 2,0 m EMCOTRONIC TM 02 control panel Operating modes: Manual operation (manual) and/or automatic Coolant system (with feed to the milling spindle) Operation via control panel standing on 3 swivel wheels Pneumatic door protection *

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand SIEMENS Additional Equipment Number of tool holders: 12 Tool holders according to DIN69880 VDI 40 Number of driven stations: 12 This 3-axis EMCO VT 400 vertical turning machine was manufactured in 2014. It offers robust construction and precision turning capabilities, ideal for various industrial applications. Consider the opportunity to buy this EMCO VT 400 vertical turning machine. Contact us for more information. Application Types Turning Prodow Tfiiopfx Aahsc

Condition: excellent (used), functionality: fully functional, Grilling and Slicing Line. Complete line consisting of: 1. Teflon Contact Grill Brand: JBT FoodTech (Formcook) Model: PRoGRILL Contact Cooker 1136 TF Serial number: 32270062 Year of production: 2014 Belt type: Teflon Belt width: 1100 mm Overall dimensions: 7000 x 2200 x 2800 mm 2. Through-feed Fryer Brand: Stein Inc. Model: JSO-IV Serial number: 699 Power supply: 415 V, 3 phase, 50 Hz Rated current: 175 A Heating: thermal oil and steam Belt type: wire mesh, stainless steel Belt width: 1000 mm Overall dimensions: 13,300 x 3,000 x 4,000 mm 3. Slicer Brand: Grasselli Model: NSA1000XC Serial number: U19R05/1188 Prjdpfx Aasw Hlw Uohec Year of production: 2014 Power supply: 400 V, 3 phase, 50 Hz Rated current: 31 A Power: 19.0 kW Overall dimensions: 1950 x 2180 x 1500 mm

Condition: good (used), Year of construction: 2007, with UniRobot FMB Control: SIEMENS 828D Bed swing: Ø 540 mm Cross slide swing: Ø 360 mm Spindle – tailstock: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel: X = 210, Z = 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm continuously variable Max. torque: 192 Nm C-axis Rapid traverse: 1000 rpm TOOL TURRET 12 stations all driven Mounting: VDI 30 Speed range: 0-5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MK 4 FMB MH5L-XP robot cell With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Prsdpfx Aaov S Ekyshec Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (hand roller): -190° ~ +190° B-axis (joint/articulation): -135° ~ +135° T-axis (hand rotation): -360° ~ +360° With coolant system Chip conveyor, extraction system Total weight (machine/robotic): approx. 5300 kg

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 800 x 400 mm range of revolution per miute: 63 - 3150 / 18 step U/min feed continuous: X/Y/Z: 8 - 800 / 8step mm/min. spindle taper: SK 4 spindle head swivable left - right: 90 ° quill stroke: 105 mm total power requirement: 5,3 kW weight of the machine ca.: 2245 kg machine dimensions LxWxH: 2,1 x 2,8 x 1,9 m Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spindle with right/left travel Automatic tool clamping via control command Prjdpfovbhcdex Aahjc Coolant device (without container) Chip collection tray Tool accessories (comparable in the photo) *

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Predjwcdytepfx Aahsc Two machines are available

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: S6AW11S1, turning diameter over cross slide: 540 mm, turning length: 550 mm, turning diameter: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all positions TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance from spindle to sub-spindle: 1,050 mm Sub-spindle: A2-6, travel: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axis: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Prsdpfx Aajw T Sq Tjhec Machine weight: approx. 5.7 t Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Transport dimensions of machine: approx. 3.3 x 1.9 x 2.2 m Electric configuration - voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet equipped with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale