Used Mco for sale (289)

Condition: used, Year of construction: 2006, functionality: fully functional, Emco machine package for sale! For sale: 2 lathes as a package including ALL tool holders and clamping equipment! 1 x Emco 665 MC Plus with counter spindle and 2 turrets, year of manufacture 2006, including 4 meter FMB Turbo 8-80 bar feeder, year 2006. Runs without issues. 1 x Emco 332 Big Bore with counter spindle and 2 turrets, year of manufacture 2001, including 3 meter FMB 5-55 Turbo bar feeder, year 2016. The 332 currently has a fault with the upper turret, specifically in engaging the driven tools (probably the clutch cup is defective). Estimated repair cost is around €5,000. Therefore, we have significantly reduced the price for this machine. Otherwise, this machine also runs without any issues! Kodpfx Aoyifnhshaelt Both machines are in daily operation and available for inspection under power. The machines have been used in single-shift operation only. Since we are selling both lathes as a package due to a system changeover, a vast range of tool holders, clamping systems (for all machines), and feed technology for all loaders is included in the package. It’s simply too much to list everything here! Dismantling and loading onto the customer’s truck can be organized at an additional low cost!

Condition: like new (used), Year of construction: 2008, functionality: fully functional, turning diameter: 340 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, turning length: 650 mm, total length: 1,750 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable, The machine is as good as new, comes from educational use, and is equipped with a complete collet system. Kodpfx Ahoywfrtjaolt

Condition: like new (used), Year of construction: 2021, operating hours: 600 h, functionality: fully functional, machine/vehicle number: MT 65 G2, The machine is like new. Kedpfx Aoyttiqshajlt

Condition: used, Year of construction: 1998, • CNC machining centre Emco, Type VMC 600, year of manufacture 1998 • incl. handwheel + 3 vices with clamping devices Kljdjyucbfepfx Ahaet

Condition: used, Year of construction: 2007, Technical details: Kedsx Aq Hwepfx Ahajlt turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, - Compact tabletop model with user-friendly, parallel upward-opening door Kodpfx Aoytr Ekehaolt - Double-walled housing with blower cooling, low external surface temperature - Furnace insulation made of low thermal mass alumina material, allowing for rapid heating and cooling - High-quality heating elements made from molybdenum disilicide (MoSi2) - Low power requirements - Heating elements controlled via thyristors, ensuring extremely precise furnace control; wear-free and silent operation - High temperature accuracy inside the furnace chamber - Exhaust vent in the furnace ceiling Incl. PC: HP Compaq dx2300 Microtower Dx2300M/E2160/160hnd/1024L/4rf, Dual Core with Microsoft XP + DVD drive + 19" Philips monitor Model ID: 190B4CS/00 (Company: Bechtle, Heilbronn 26.09.2003 net €528 Inventory No. 5633) with Eurotherms iTools with Wizards pre-installed and on DVD, all necessary cables, keyboard, Logitech wireless mouse

Condition: refurbished (used), Trimming recutting machine MEM Cobra Cutting height 120 mm Diameter 1070 mm 4 axes variable 2 x 55 KW Klsdpfx Ahou Ni Iuoajt Refurbished machine. Optionally we can offer new sprinkle separator as in photo.

Condition: excellent (used), Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Klodpfx Aoxd Rl Nehajt Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Kedpfx Ahsxp Hudoajlt

Condition: ready for operation (used), functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, SAMCO Unilev150 double-sided edge sander Specification: • condition - used Klsdpfx Asvmqypjhajt • manufacturer - SAMCO • model - Unilev 150 • working height - 150 mm • sanding belt dimensions 150 x 2150 mm • two sanding belt speeds • tops measuring 22 x 144 cm • both tops adjustable at an angle in the range of 0-30 degrees • engine power - 3.5 / 4.5 HP • pneumatic belt tensioning and oscillation • adjustable veneer sanding shoe on one side and "back" 15x75 cm on the other • attachment, angle grinder • extraction nozzle - fi 140 mm • weight - approx. 450 kg • overall dimensions 144 x 71 x 130 cm (length x width x height ) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • the possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: new, Year of construction: 2026, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 80 m3 / h at 50Hz. Kjdpfx Ajftzkqjhaolt Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Completely new with 12 months warranty. Kedpfoftzvijx Ahajlt Nominal flow: 250 m3 / h at 50Hz. Final vacuum: 200 mbar Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Rotary dry vane vacuum pump. Pump completely new. 12 months warranty Marpa Vacuum pump with equivalent characteristics to the Becker VT 4.40 model. Unbeatable prices. Kedjftzd Sepfx Ahaelt Nominal flow: 40 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 140 m3 / h at 50Hz. Kodsftzhnjpfx Ahaslt Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Dry Rotary vane vacuum pump. Available in stock. Completely new. With 12 months warranty. Nominal flow: 25 m3 / h at 50Hz. Kljdpfxoftzpvs Ahaet Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: used, input frequency: 50 Hz, Offered for sale: a lot of 110 mobile air conditioners of various brands and models. Kedpfjyuyxujx Ahaolt Overview of the models in this lot: Portable 51QPD12N7S – 58 units Amcor PCMB 12KE-410 – 21 units Midea MPK-10CEN2 – 18 units PAC 2600 – 11 units Gree KYD-32Na/D – 2 units Total: 110 units This lot is sold as a whole. Please feel free to contact us for more information, pricing or transport options. Worldwide shipping can be arranged.

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Kjdpfxjdctnbs Ahaelt Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: used, ROTATION DIAMETER 630 MM MAXIMUM TURNING DIAMETER 510 MM Kljdpferzt Iqsx Ahaot MAXIMUM TURNING LENGTH 1578 MM BENCH INCLINATION 45° MAXIMUM X AXIS TRAVEL 1590 MM MAXIMUM Z AXIS TRAVEL 290 MM RAPID 20 M/MIN SPINDLE BORE 105 MM ASA A2-8 CHUCK NOSE TAPER SPINDLE MOTOR POWER 18.5 - 22 KW SPINDLE SPEED 2500 RPM QUILL OF TAILSTOCK DIAMETER 125 MM TAILSTOCK TRAVEL 1590 MM TAPER QUILL CM 5 QUILL TRAVEL 120 MM CNC FANUC Oi-TC CHUCK DIAM. 380 MM ROTATION TURRET WITH 12 PLACES CHIP CONVEYOR YOM 2008 WEIGHT 8500 KG

Condition: ready for operation (used), SMB Combisifter 10/32 + 32/60 2 fractions separates wood, plastic, foil and paper, wind sifting with filter system, 2 vibrating chutes, airlock, control cabinet with complete control system, mobile with hook trolley, self-erecting, compressor for filter cleaning, 1000 operating hours. Klodpfx Ahjp Aunlsast

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm Kjdsu Ixw Ajpfx Ahajlt revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, weight approx.: 450messurements (LxWxH): 1250x1350x1550y-travel: 300z-travel: 200x-travel: 350speed range: 80-2200table diamension: 600x200 Description:  Ksdpfxergvbps Ahaolt -)coolant equipment -)machine lamp Revs80 – 2200 (8) r.p.m.TaperDIN2078 ISO30 (Anzugsschraube M12)Working area300 x 200 x 350 mmTable600 x 200 mmFeeds stepless X,Y range20 – 200 mm/id traverse X,Y range1200 mm/ll travel45 mmMax. feed force1600 NmSpindle motor1,1/1,4 kWvertical table600 x 200 mmDistance vertical milling spindle - milling table20 – 370 mmDistance horizontal milling spindle - milling table84 – 434 mmFeed in X-axis (stepless)20 – 200 mm/minLength1250 mmWidth1350 mmHeight1550 mmWeight450 kg

Condition: like new (used), Year of construction: 2022, operating hours: 650 h, functionality: fully functional, machine/vehicle number: S6E222101, turning length: 520 mm, turning diameter over cross slide: 360 mm, turning diameter: 500 mm, The machine is in like-new condition with only 650 operating hours. It is in excellent optical and technical condition. Kledpoyn Aahefx Ahajt

Condition: excellent (used), Manufacturer, Emco. Machine type, Hyperturn 665 CNC lathe. Inventory number, 22281. Machine designation, Drehmaschine Emco Hyperturn 665. Machine number, serial number R7A Q 2701. Year of manufacture, 2002. Control system, Siemens Sinumerik 840D with PCU 50 V1. Programming, DIN ISO, Siemens ShopTurn capable. Axes configuration, X axis and Z axis. Max turning diameter over bed, approx. 665 mm. Max turning diameter over cross slide, approx. 500 mm. Max turning length, approx. 1,000 mm. Swing diameter, approx. 665 mm. Main spindle. Spindle speed range, up to approx. 4,000 rpm. Spindle nose, DIN standard spindle interface. Spindle motor power, approx. 30 kW. Spindle torque, high torque for soft turning applications. Tool system. Tool turret, CNC controlled turret. Number of tool stations, typically 12 positions. Tool holder type, VDI standard. Live tooling, not included, soft turning configuration. Tailstock, CNC controlled tailstock. Quill diameter, approx. 100 mm. Quill travel, approx. 120 mm. Coolant system, included. Chip conveyor, included. Kledpfx Aex S Hghshast Machine accuracy. Positioning accuracy, approx. 0.01 mm. Repeatability, approx. 0.005 mm. Electrical supply data. Supply voltage, 400 V. Frequency, 50 Hz. Rated current, 110.00 A. Backup fuse, 125.00 A. Connected load, 56.00 kW. Compressed air requirement, approx. 6 bar. Machine dimensions. Machine length, approx. 4,500 mm. Machine width, approx. 2,200 mm. Machine height, approx. 2,100 mm. Machine weight, approx. 8,000 to 9,000 kg depending on configuration. Application, precision soft turning of steel, aluminum, and non hardened materials.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 Klodpowxxdfsfx Ahast >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest Kljdpfxowxxd Es Ahaot >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.