Used Mco for sale (292)

Condition: ready for operation (used), functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, SAMCO Unilev150 double-sided edge sander Specification: • condition - used • manufacturer - SAMCO • model - Unilev 150 • working height - 150 mm • sanding belt dimensions 150 x 2150 mm • two sanding belt speeds • tops measuring 22 x 144 cm • both tops adjustable at an angle in the range of 0-30 degrees • engine power - 3.5 / 4.5 HP • pneumatic belt tensioning and oscillation • adjustable veneer sanding shoe on one side and "back" 15x75 cm on the other • attachment, angle grinder • extraction nozzle - fi 140 mm • weight - approx. 450 kg • overall dimensions 144 x 71 x 130 cm (length x width x height ) Additional information: Njdpfx Aevmqypsh Recp • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • the possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: good (used), Code: 0217 Brand: SAMCO Model: F 3000 Belt sanding machine with double gooseneck and 3 motors, for wood, carpentry, metals, aluminum, composite materials, and various other materials Technical data: Table length mm 3000 Table width mm 800 Vertical adjustment of table mm 850 2-speed belt motor rpm 1400/2800 - Hp 3/4 Automatic table lifting Sanding belt length mm 8000 Sanding belt width mm 120 Gooseneck useful depth mm 600 Ncjdpfx Asxivyceh Rep Gooseneck height mm 200 Overall dimensions mm 4300 x 1500 x 1800 h Weight kg 740

Condition: used, Technical Data: Work Table Dimensions: Electrically adjustable table height Belt guard Pressure device Wheel diameter: 195 mm Extraction port: 2x120 mm Nodpfx Aswxtiijh Rscp Horizontal table movement Built-in fan Power supply: 400 V Belt sander motor power: Overall Dimensions: Length: 2000 mm Width: 4400 mm Height: 1600 mm

Condition: used, Year of construction: 2012, turning diameter over cross slide: 250 mm, turning length: 405 mm, turning diameter: 85 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 300 mm, total height: 1,800 mm, total length: 1,700 mm, total width: 1,270 mm, turning diameter over bed slide: 250 mm, overall weight: 1,400 kg, EMCO Turn E25 Year of manufacture 2012 Nedpfx Ahoyi Hk To Rocp Bar feeder Top Load 4-25 Year of manufacture 2014 Without AWZ Loaded free of charge Location: 5400 Hallein/Austria

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Njdpfxsdctnbe Ah Rjcp Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Nodpfxog Rcf Sj Ah Rjcp

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Nsdpfx Aeg Rcf Ish Rocp

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system Njdpovt Amuofx Ah Rscp

Condition: good (used), Year of construction: 2019, functionality: fully functional, HYPERTURN 65-1300 (SM2Y2) DUOTURN with 2 turrets including milling drive and 2 Y-axes. Highly productive CNC turning/milling center for complete machining of turned and milled parts with 1300 mm distance between spindles. Integrated spindle motors (ISM) on main and counter spindle (liquid cooled), with preloaded roller guides. Drive power: Main spindle - 29 kW Counter spindle - 29 kW Speed range: Main spindle 0 - 5000 rpm Counter spindle 0 - 5000 rpm Spindle mount (DIN 55026): Main spindle: KK 6 (Max. bar capacity ø 77 mm) Counter spindle: KK6 Y-axis in both turret slides: • Travel: +/- 50 mm Includes: • Hollow clamping cylinder incl. drawtube • Part ejector and through-spindle flushing on counter spindle • Sinumerik 840D-sl/OPERATE control system o emcoNNECT/APP-based user interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN dialog programming o USB interface o Network drive / Ethernet o 3D simulation and more • 2x 12-station BMT tool turrets Radial with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed rate switch. o Specifications: o Max. 6.7 kW at 2650 rpm Ncodpfx Ahex Auyzs Rsp o Constant torque 25 Nm o Speed range 0-5000 rpm o C-axis for main and counter spindle o TRANSMIT software for simple C-axis programming • Chip conveyor Chip conveyor Minimal quantity lubrication • Control cabinet air conditioning unit • Hydraulic power unit • Machine light • 230 V socket on the operator panel • 5 leveling elements • Documentation MT65/HT65 BigBore77-LEFT Bar capacity 3 inches (ø76.2 mm) instead of ø65 mm (main spindle). Drawtube connection: M85 x 2 Spindle mount (DIN 55026): A2-8 Max. speed: 4000 rpm Max. torque: 250 Nm Max. power output: 29 kW Max. chuck size: ø250 mm MT65/HT65 BigBore77-RIGHT Instead of the 65 counter spindle, the 76 counter spindle with spindle mount KK8 incl. part ejector is installed. Drawtube connection: M85 x 2 Spindle mount (DIN 55026): KK8 Max. speed: 4000 rpm Max. torque: 250 Nm Max. power output: 29 kW Max. chuck size: ø250 mm BMT turret (upper right) with direct drive for HT65DT/HT65TT/MT65 The VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface. Max. speed: 12,000 rpm Max. drive power: 10 kW BMT turret (lower) with direct drive for HT65-DT/-TT/HT65PM The VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface. Max. speed: 12,000 rpm Max. drive power: 10 kW Immediately available

Condition: good (used), Year of construction: 2008, Formcook Combi 625 Contact Oven The Formcook Combi 625 is a dual-zone industrial cooking oven designed for high-capacity food production. It combines contact heat and hot air with steam injection, enabling flexible cooking of proteins and prepared meals. Built for durability and hygiene with stainless steel and silicone-coated rollers, this machine is your partner in high-throughput, consistent cooking. MANUFACTURER Formcook AB MODEL Combi 625 POWER SUPPLY 3 x 400 V, 90 A, 70 kW, 50 Hz DIMENSIONS 4,120 x 1,500 x 2,300 mm COOKING AREA 650 x 2,500 mm COOKING TIME RANGE 1 min 32 sec – 51 min Nodpfx Ajykn Hlsh Rjcp HEATING METHOD Thermal oil plates (max 240°C) + Hot air with steam (max 280°C) STEAM PRESSURE Max. 7 Bar COMPRESSED AIR 6 bar, 100 l/min WATER SUPPLY 60–65°C, max. 30 l/min WEIGHT Approx. 2,500 kg CONVEYOR DIMENSIONS 9,900 x 650 mm YEAR OF PRODUCTION 2008

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Ncedpfxou Img Se Ah Rep Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Drawer 6 Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set.

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Nodpfx Ajxmkcash Rocp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Njdpfx Ahsw Dfhuo Rjcp

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Nedpfetxb Avox Ah Rocp

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Ncedpfx Aetxb Apsh Rjp

Year of construction: 2003, condition: ready for operation (used), Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible. Nedpfsxuvn Dex Ah Rjcp

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Ncodewxxdfopfx Ah Rop Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Nsdpowxxd Eefx Ah Recp Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop Nodpfx Ahowag Stj Rjcp About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 coolant ja chip conveyor ja kW generator - rated current 110 A Ncsdpfx Asqn A Rrjh Rsp connected load 56 kW

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm Nodpfx Aeu Ixw Aoh Rocp max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: excellent (used), Year of construction: 2017, Heidenhain TNC 620 control Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed: 12,000 rpm Rotary and swivel table Tool magazine for 50 tools, ISO 30 Nodex Rpahopfx Ah Rjcp Chip conveyor LANG Automation

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Nodpfju Ibihox Ah Rjcp Parts shown by hand not come.

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank Nodpfxsd Atx Ee Ah Recp -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Condition: used, Measurement data acquisition device, test device, communication system, data acquisition system -DSM: Nanoserver 96M1566L -suitable for: mobile applications -Input: 8-30 V DC, 15 A Njdeff Nmbspfx Ah Recp -Dimensions: 245/220/H120 mm -Weight: 2.8 kg