Used Measurement Systems for sale (43,382)

Condition: good (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 11140003483, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,500 mm, total length: 4,000 mm, total width: 4,000 mm, table width: 795 mm, table length: 1,500 mm, rotary table diameter: 800 mm, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 15,103 h, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 50 A, DECKEL MAHO DMU 100 T Universal Machining Center - Positioning speed X/Y/Z: 20 - 2000 mm/min - Measuring system resolution X/Y/Z: 0.001 mm - Positioning accuracy X/Y/Z: 0.010 mm - Tool holder: SK 40 - Max. tool diameter when all positions in magazine 1 are occupied: 130 mm / magazine 2: 80 mm - Max. tool length from spindle nose: 315 mm - Max. tool weight for automatic tool change: 8 kg - Max. total tool weight in magazine: 160 kg - NC rotary table integrated into the fixed table - Number of T-slots: 14 / H 12 mm - Dovetail guide / one: 14 / H 7 mm - Distance between T-slots: 63 mm - Permissible load on the worktables: fixed table: 800 kg, rotary table: 500 kg - Includes the tool holders located in the tool changer Fjdpfx Aszxzk Esptogg Note: The machine can be transported on a truck up to 3000 mm wide! FCA D-72589 Westerheim - loaded onto a truck.

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Fsdjzz Ahqepfx Aptogg Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, repeat accuracy: 0.001 mm, CNC coordinate measuring machine Mitutoyo CRYSTA-Apex S7106 | Year of manufacture: 2019 | Includes PC evaluation station For sale is a high-precision CNC coordinate measuring machine (CMM) from the manufacturer Mitutoyo, model CRYSTA-Apex S7106. This volumetrically compensated measuring machine, manufactured in 2019, has been regularly maintained; the latest factory calibration certificate dates back to November 2024. General device data * Manufacturer: Mitutoyo * Model: CRYSTA-Apex S7106 * Year of manufacture: 2019 Fgsdpfezyp Iuox Apteg * Serial number: 61891229 Measuring range & resolution * X-axis: 700 mm * Y-axis: 1,000 mm * Z-axis: 600 mm * Resolution of length measuring system: 0.0001 mm Probe system * Type: SP25M * Module: SM25-2 * Serial number of probe system: 25UP39 Accuracy & calibration (according to factory calibration 11/2024) * Length measuring deviation (E0,MPE): (1.7 + 4.0 * L/1000) µm * Single probe form deviation (PForm,MPE): 1.7 µm * Repeatability (R0,MPL): 1.3 µm (measured value: 0.40 µm) * Last calibration/inspection: 14.11.2024 * Status: The coordinate measuring machine meets the factory specifications Additional equipment * PC evaluation station (Dell) with 2 monitors (HP) and keyboard/mouse * Control panel with joysticks for manual movement * Automatic temperature compensation From an insolvency proceeding, sale in open auction. Offer deadline: September 30, 2026, 6:00 PM. Package price for multiple machines from this proceeding possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and submission of offers can be found on our IKV Fester GmbH homepage under Auctions.

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Fjdpfx Ajzwucroptsgg Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Price: Euro 27,500.00 plus VAT, ex works

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, TESA MH3D DCC coordinate measuring machine (CMM) for sale in very good, well-maintained condition and ready for immediate use. Features: PC-DEMIS Pro for Windows Version 4.2 MR4 Release software (legally transferable) Current calibration and maintenance performed on 09/09/2025 Renishaw MH20i / TP-ES probing system Includes several probe extensions and accessories Including EM1 extension exchange module, L=70 mm (new price 07/2025: €1,255 net) 1x TP20 SF probe module (standard probing force) 1x TP20 EF probe module (high probing force for long probe combinations) Functional HP computer included Calibration and measurement records available Operating manual on CD Additional, functional Renishaw Brown & Sharpe TP-ES probe head Fsdoy Taixjpfx Aptjgg Original TESA Star-i probe head (defective) Additional Renishaw MIP probe head (probably defective) Various styli included (see pictures) Condition: Granite table in very good condition Axes run smoothly and precisely No problems with the air bearings Machine has been regularly serviced Used only in a metrology laboratory Immediately ready for production and measurement Typical wear marks present on one side of the guide rail; purely cosmetic and without any technical restrictions Air bearings run smoothly, without jolts, and precisely Calibration is current and within specification Inspection and functional demonstration possible by arrangement. Suitable for quality assurance, incoming goods inspection, manufacturing metrology, toolmaking, CNC machining, or metrology service providers.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover Fjdpfszv Rhuox Aptsgg - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN Fgjdpfx Ajzp Edwsptsg The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Model: MIRACLE 081507  Fedourf Egspfx Aptsgg With RATIONAL-DMIS CAD version 6.9       Measurement range:   X = 800 mm, Y = 1500 mm, Z = 700 mm    Accuracy:   LEADER MIRACLE incl. PH10 head + SP25 – MPEe  SP25 E=2,7+3L/1000 L=mm    Temperature range:  Degrees: 20 – Total temperature variation +/-1°C over 48 hours.  Otherwise according to the technical documentation    Renishaw probe system:  Renishaw PH10M  Renishaw SP25 Body scanning  Renishaw TM-20 “gentle” module incl. 1 pcs. Module  Renishaw SP25-1 incl. 1 pcs. Holder  Renishaw SP35-2 incl. 1 pcs. Holder  Key/probe set – Renishaw M2  Renishaw S3 Plus controller  Calibration ball Ø25.000 incl. Stand  Renishaw Rack for FCR25 incl. 6 pcs. Gates  Incl. Option “Tip changer”  Renishaw Joystick    Rational DMIS for Windows is an interactive graphics software that provides advanced options such as:  User-friendly operating system WIN7 or WIN8  Unique interactive 3D graphic engine import of Iges and Step format  Off-line programming and support of a simulated measuring machine environment  Powerful analytical report generation  Automatic intelligent naming of the measured object  Possibility of connecting a measuring machine to an optional CAD system that uses either IGES, STEP or DMIS  RATIONAL-DMIS CAD option for measuring and analyzing contours and form tolerances 

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Zeiss CNC coordinate measuring machine Prismo Mass Navigator VAST GOLD Year of manufacture: 2021 Last calibration: 02/2025 Measuring range: X = 1200 mm, Y = 1800 mm, Z = 1000 mm In technically and visually like-new condition The machine was located in an air-conditioned precision measuring room Device features, equipment: C99 control system with BP26_SE control panel Automatic temperature compensation VAST GOLD sensor system 9-position probe changer magazine Reference probe Temperature probe Probe changer turret, 7 positions Calibration sphere HP Z4 workstation with monitor Calypso Basic 2022 software Options: Navigator, Curve, QDAS Converter, and PiWeb Reporting Fedpozr I R Eefx Aptsgg Further accessories and options available Available for immediate delivery

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. Fsdpfeyc H N Nsx Aptjgg The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Mitutoyo coordinate measuring machine, type Crysta Apex C544 Temperature compensation for all axes Measuring range, X-axis = 500 mm Measuring range, Y-axis = 400 mm Measuring range, Z-axis = 400 mm Measurement uncertainty = 1.9 + 3L/1000 (µm) Mitutoyo control system UC200 Mitutoyo joystick box, type M Renishaw probe head PH10 Renishaw sensor TP200 Renishaw TP200 measuring modules (6x) Renishaw SCR200 indexing rack Measuring software MCosmos-1 v.4.x PC system WIN10 and 27" monitor (new) Reference sphere / calibration sphere (new) Delivery: Upon request Installation: Upon request Calibration: Upon request Training: Upon request Software upgrade: Upon request Software options: Upon request Measuring room design: Upon request On-site consultation: Upon request Rental: Possible Fgsdpfx Apszt Tg Ujtjg Leasing / hire purchase: Possible

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle Fgjdozdz S Tjpfx Apteg - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Year of construction: 2017, condition: used, REF: MM6447 Fgodjzbkl Sopfx Aptsg 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 280 mm, measuring range Z-axis: 350 mm, overall weight: 100 kg, workpiece weight (max.): 50 kg, Equipment: type plate available, High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing. Anytime optionally via software updatable functions: - Motorized Y-Supporting table Fgsdpfx Apswzlcajtsg Scope of supply: - Basic mechanics with integrated Y-adjustment table - Integrated control system - integrated gauging force regulation - software option roughness - Software option for measurement and evaluation of the following standards: DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Prüfblatt (SEP 1940) - PC W11/64Bit; 24"TFT flat screen; - Compressed air unit consisting: Particulate filter 25µm/0.1µm, oil filters and water separator 2 precision pressure regulator mounted on base with stand - ConturoMatic Software; user manual - Software add-on for roughness calculation - Cable set - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Description of the up down function: The scanning of surfaces in two directions is possible by the measuring direction switching function. This can be assessed without loss of the relationship to other scans from the same measuring process. Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs. Additional evaluation possibilities are for example - Raceway diameters - Diameter - Thickness variation - Parallelism - Cone angle measurement - Calculation of pitch deviation - Thread testing (thread calculation software optionally) etc. Technical data contour and roughness measurement: Aerostatic linear bearings (X and Z) Measuring range Contour X 280mm (XL) 360mm Measuring range Roughness Z 350mm (XL) 550mm Suitable range Ra Ra from 0.08µm* Suitable range Rz Rz from 0.8µm* Resolution 1nm Sensing system optically incremental 1 point measuring in X direction (static) Accuracy +/-(0.85µm+L/100)µm* [L=mm] Measuring speed contour 0.1-3mm/s self-optimizing Measuring speed roughness 0.1-0,5mm/s self-optimizing Positioning speed up to 25mm/s Probing force contour 30mN Probing force roughness 7.5mN Table load 25kg weight: 96kg * According to our specified terms- Subject to change without notice

Condition: good (used), Year of construction: 2014, functionality: fully functional, Description: The machine is in good technical condition, and testing is possible upon prior arrangement. Measurement range: 800 × 1200 × 600 mm. TESASTAR-M measuring head. TESA/TMA adapter. TesastarMP body. 4 TesastarMP measuring modules. TESASTAR-e system. Extensive set of M2 measuring probes. Measuring probe extensions. 5-position rotary measuring probe system. CMM/joystick control. PC workstation. Currently installed software: PC-DMIS CAD++ 2024.2. Fjdpfxszy Ig No Aptogg

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! Fgedpfezmtlqox Aptog You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Keyence XM-T2000 coordinate measuring system from 2021, in excellent and fully functional condition. Keyence XMM-1600 controller included. Additional accessories: Keyence case, dongle, user manual, and certificates. Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance: 1 μm, Angle: 0.0001 degrees Fgsdpfxsx H T H Ds Apteg Measuring accuracy: Repeatability: ±3 μm, Measurement deviation: ±8 μm Maximum load capacity: 25 kg #8406

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. Fgedpfxezx Efte Aptog The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Fgodpszc Erpjfx Apteg Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: ready for operation (used), Hommel Etamic W20 Jenoptik Waveline Roughness Tester, Measuring Device (562) Measuring range: max. 20 mm Measuring span: ± 300 µm Accessories: Tripod Granite measuring plate PC You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Fodezyqzcjpfx Aptjgg Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). Fgsdpfx Apey Um T Hjtjg 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Year of construction: 1999, condition: good (used), functionality: fully functional, SPECTROLAB M8 SPECTROMETER, designed for analyzing the composition of materials using advanced spectrometry technology. The system enables the identification and analysis of elements and/or the composition of materials for industrial applications, quality control, and material classification. It is used to measure aluminum and copper. • Analysis range/technology: optical emission spectrometer (Spark OES) that measures Si, Fe, Cu, Mn, Mg, Zn, Ni, Cr, Pb, Sn, Ti, Ca, P, Sr, V, Al. Fedpfx Aozbtvgoptogg The equipment has been operating under normal industrial conditions until 2020. Suitable for material analysis, quality control, and characterization of compositions in industrial environments.

Condition: used, Thermotron AST-18 HALT/HASS Test Chamber Manufacturer: Thermotron Industries Model: AST-18 Controller: AST-8800 Machine Type: HALT/HASS Test Chamber / Accelerated Stress Test System For sale is a Thermotron AST-18 HALT/HASS test system for combined temperature and repetitive shock/vibration testing. The system enables accelerated stress testing of components and assemblies through extreme temperature changes in combination with multi-axis vibration excitation. Operation and monitoring are performed via the Thermotron AST-8800 controller. Technical Data: Temperature Range: -100 to +200 °C Temperature Change Rate: >50 °C/min at the test specimen Vibration Frequency: 0 to >10,000 Hz Vibration Axes: 3 linear + 3 rotational / 6 degrees of freedom Max. Payload Test Table: 135 kg Airflow Rate: 1,400 CFM / approx. 2,379 m³/h Grid Dimension: approx. 102 × 102 mm Fodpezyndbjfx Aptjgg Voltage Supply: 400 V / 3 Ph / 50 Hz Max. Current according to Nameplate: 65.3 A Heating Power according to Nameplate: 20 kW AST-8800 Controller: Windows-based user interface Combined temperature and vibration display PSD / Power Spectral Density Data recording and data storage Vibration alarm and shutdown limits Ethernet / Web access User management Monitoring of operating and maintenance times Test Chamber: W × D × H: approx. 838 × 864 × 762 mm Test Chamber Volume: approx. 0.55 m³ / 550 liters Vibration Table: Manufacturer's table size depending on the configuration: approx. 610 × 610 to 711 × 711 mm Impactors: 4 or 5, depending on the design Dimensions: Move-In Dimensions W × D × H: approx. 2,286 × 1,448 × 2,210 mm Footprint: approx. 2.29 × 1.45 m Equipment: Thermotron AST-8800 controller Repetitive shock/vibration table Temperature test chamber Acceleration sensors Temperature measurement technology Safety and monitoring functions Condition: Used Optical condition as shown in the pictures. Calibration valid until 30.11.2024, currently expired. Scope of Delivery: Thermotron AST-18 HALT/HASS test system AST-8800 controller RS-28 unit Scope of delivery and accessories as shown in the pictures. Shipping Data: Dimensions: approx. 2,286 × 1,448 × 2,210 mm Weight: approx. 1,000 kg (estimated) Shipping via freight forwarder possible. Availability: upon agreement. Subject to changes, errors and prior sale.

Year of construction: 2013, condition: used, Goudsmit rotary magnetic separator Article number: SCRZ2020018 Year of manufacture: 2013 Excludes rotor with magnetic bars (can be supplied by the manufacturer Goudsmit magnetic systems) Fedpfx Apsxc Ew Djtsgg Dimensions: 200mm x 200mm See our other ads VMA Wekerom

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, type plate available, We are offering this used Keyence VL-500 optical 3D coordinate measuring machine, manufactured in 2020. Manufacturer: Keyence Corporation Model: VL-500 Country of origin: Japan Year of manufacture: 2020 Serial number: CC910026 Fgjdpfx Ajy Uw Dveptog System consists of: Control unit: VL-500 Base/object table: VL-530 Measuring head: VL-570 Calibration plate Manuals Dongle PC Last calibration performed by the manufacturer in 11/2024. If you have any questions or require further information, please feel free to send us a message or call us.