Used Measuring Stand for sale (14,314)

Condition: like new (used), Year of construction: 2025, ZEISS ScanBox 5110 D – Automated 3D Measuring Machine Manufacturer: Carl Zeiss GOM Metrology GmbH Model: ZEISS ScanBox 5110 D Revision: Rev. 01 Year of manufacture: 2025 Version: D / Door Machine type: Automated optical 3D measuring machine For sale is a virtually new ZEISS ScanBox 5110 D from 2025, complete with a robot system, motorized rotary table, optical 3D measuring system, ATOS Plus 45M photogrammetry, high-performance workstation, and extensive accessories. Measurement and component data: Max. component size: Ø 1,000 mm Max. component height: 2,000 mm Max. component weight: 2,000 kg Door opening width: approx. 950 mm Bjdpjzypy Refx Abtjll Sensor compatibility: ATOS 5 for Airfoil / ATOS 5 ATOS Plus 45M: 45-megapixel GigE CMOS camera Image field: 1,000 × 667 mm² or 2,000 × 1,333 mm² Dual-reflector LED flash illumination Integrated controller Software: ZEISS INSPECT Optical 3D – Pro VMR – Virtual Measuring Room CAD import / CAD nominal-actual comparison Form and position evaluation according to ISO GPS / ASME Y14.5 Automated measurement sequences and reporting Robot simulation and offline teaching Smart Teach / path optimization Automatic collision detection Direct robot control Image processing computer: 7875.L Workstation AMD Ryzen Threadripper PRO, 32-Core / 4.0 GHz 256 GB RAM NVIDIA RTX 4000 Ada, 20 GB GDDR6 2 TB SSD Windows 11 64 Bit GOM memory expansion: 10 TB RAID1 Electrical data: 371–418 V AC / 50–60 Hz / 3-phase / 16 A Connected load: 6.4 kVA Dimensions / Transport data: W × D × H: approx. 2,200 × 2,850 × 3,050 mm Machine weight: 2,635 kg Shipping / special transport Equipment: Robot system, motorized rotary table, safety / measuring cell, ATOS Plus 45M, 7875.L workstation, 10 TB RAID1, operator station, measuring / inspection accessories, Transport / accessory case and documentation as shown in the pictures. Condition: Used – Year of manufacture 2025 Virtually new, very well-maintained optical condition as shown in the pictures. Scope of supply: ZEISS ScanBox 5110 D complete system with robot system, measuring technology, computer, memory expansion, accessories and documentation as shown in the pictures. Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: like new (used), functionality: fully functional, For sale is 1x Kistler maXYmos BL evaluation unit with the article number 5867B1011. XY monitor for good/bad assessment of curve profiles Table/wall mounting Sensor channel Y: for strain gauge sensors, +/-10V Sensor channel X: for potentiometers, +/-10V Fieldbus: Selectable - Ethernet/IP, EtherCat, or PROFINET for process values and control Digital I/O (24V) for control and results Measurement functions: Box, Line, Envelope Evaluation elements: Box, Line, Envelope 4 evaluation elements per curve 16 measurement programs for 16 different parts Up to 8,000 XY value pairs per curve Short evaluation time, up to 10 parts/second 2 switching signals in real-time for X and Y thresholds USB for notebook (PC program maXYmos PC) Info pages for NIO cause diagnosis Internal serial number generator with selectable format Warning and alarm messages can be freely assigned Access protection for different user groups 3.5" color touchscreen Power supply 24 VDC Bsdpozxz Epefx Abtjll The item comes from stock/spare parts inventory. The optical condition can be seen in the attached pictures. We will gladly provide further technical documents or detailed pictures upon request. Inspection and collection are possible by arrangement. Shipping is possible for an additional charge. Subject to prior sale, errors and changes.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0007306, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, CRYSTA PLUS M 7106 Manual Coordinate Measuring Machine 1. 1 piece 8,500.00 8,500.00 Measuring range: X=700 Y=1000 Z=600 Bodpezkakbjfx Abtell Length deviation of measurement: E=(4.5+0.45L/100) * High accuracy * Unlimited micro-feed capability for traversing (point acquisition) * Self-adjusting air bearings * Quiet operation with minimum air consumption * Granite measuring table * Precision glass scales * Software for MS-Windows NT/2000/XP/WIN 7 * Upgrade from MCOSMOS Manual V2 to V4 * Computer - personal computer * LED monitor DELL 24" * Ceramic calibration sphere for SMS - diameter 20mm

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Bledoxv A T Nspfx Abtel Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Bsdpfezwu Alox Abtjll Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Blsdju Sqmdspfx Abtel

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Bodpfx Ajzxqxfsbtoll The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 For sale is a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. The system is in very good technical and optical condition and has been regularly maintained. The laser scanner has a current calibration. Ideally suited for 3D measurement technology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Equipment Nikon MCAx30+ 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Current calibration of the H120 scanner Transport case for the measuring arm Separate transport case for the scanner Blodpfszxz Ikox Abtol Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, immediately ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. The system has been carefully handled and, due to the current calibrations, can be used directly for professional measurement tasks. The MCAx30+ offers high flexibility in mobile 3D measurement technology due to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both classical tactile measurement and the rapid, non-contact acquisition of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measurement package. Inspection and functional testing are possible after prior arrangement. The sale is preferably as a complete system. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.

Condition: like new (used), 3D Machines – Brown & Sharpe Standard Bedpszndw Tsfx Abtoll

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Bjdpfx Aszwucrsbtell Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Price: Euro 27,500.00 plus VAT, ex works

Condition: used, Year of construction: 2002, total width: 600 mm, total length: 600 mm, total height: 800 mm, Colour: Grey Empty weight: 50 kg - Year: 2002 - Documentation available: No Bsdpfeyu Sl Hex Abtjll - CE certificate present: No - Serial number: 97370 - Measurement equipment model: Tool presetter - Options: Digital readout - Transport dimensions: 600mm x 600mm x 800mm (l x w x h) - Transport weight [kg]: 50kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand 3D scanner, the “Shining 3D Scanner & EX Pro(H)” Item for sale: 1 x Shining 3D Scanner & EX Pro(H) We are happy to configure the machine to your requirements. Please feel free to contact us! Bodpozxxubofx Abtell Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), FARO Gage Plus F4 3D Coordinate Measuring Arm Manufacturer: FARO Model: Gage Plus F4 Machine Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 For sale is a used FARO Gage Plus F4 3D coordinate measuring arm with CAM2 SmartInspect Pro software and a comprehensive range of measuring, tooling, and accessories. This mobile measuring arm is suitable for industrial measuring and testing tasks, quality assurance, as well as the acquisition and control of component geometries. Technical Data: Model: Gage Plus F4 Device Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 Accuracy Specification: 5 + 8L/1000 µm Certification Date: 12.06.2019 Country of Manufacture: Switzerland Software: Blsdpjzxy Sbjfx Abtel FARO CAM2 SmartInspect Pro Software key as shown in the images USB stick as shown in the images Equipment: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the images Measuring and probing accessories as shown in the images Tool and accessory case FARO protective cover Documentation / documents as shown in the images Additional accessories as shown in the images Dimensions: Dimensions of the measuring arm: not clearly specified Transport Data: Transport dimensions: not clearly specified Weight: not clearly specified Shipping or freight forwarding possible Condition: Used Optical condition as shown in the images. Nameplate present. Scope of delivery: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the images Tool and accessory case Measuring and probing accessories as shown in the images FARO protective cover Documentation / documents as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: good (used), Offered here is a measuring microscope from the manufacturer Mahr. Manufacturer: Mahr Type: WMZ Bodpfx Aszu I Enobtsll Serial No.: M-073-08

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Bsdpfx Abszxgmxjtjll Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-S5-22-48417, input voltage: 230 V, overall weight: 51 kg, Dear Sir or Madam, We are selling: FARO Quantum S MAX 2.5 m, year of manufacture 2022, fully functional, current calibration available, including CAM2 Probing Edition with an unlimited CAM2 license and USB dongle, complete with all accessories. - Arm reach: 2.5 m - Number of axes: 7 Sale only to business customers; no warranty. Equipment: - Calibration kit - Transport case - Mounting plate Blodpozxn E Nefx Abtel - 3 mm and 6 mm iProbes - USB cable - Power cord 230 V - Rechargeable battery - Mount G3+, magnetic holder 150 mm - Measuring software CAM2 Probing Edition 1, unlimited license for CAM2 - USB dongle, single-user license Please contact us if you have any questions.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 113018006121, Equipment: documentation/manual, type plate available, Optical measuring system with the following objectives: 1900WD30, 800WD17, 400WD19, and 150WD11. Rotary unit with EROWA clamping system. Ring light, compatible with all objectives. Bedpjzwuxaofx Abtjll Automated pick-and-place system with 24 positions, featuring the latest software packages: MetMax 4.0.1, Alicona Laboratory Measurement 11.0.1, and Inspect 2023. 2 Inspect licenses available as floating licenses. Automation Manager.

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231598, Keyence International NV/SA – KEYENCE IM-7030 Year of manufacture: 2019 The KEYENCE IM-7030 is a highly precise digital measuring projector with automatic image processing and integrated optical probe. The system has been specifically developed for fast and non-contact measurement of workpieces in manufacturing and quality assurance. Thanks to the automatic measurement process activated by the push of a button, the machine is particularly suitable for serial measurements and recurring inspection tasks. The machine combines simple operation with high measuring accuracy and enables rapid inspection of contours, diameters, distances, angles, and geometric features of various workpieces. Thanks to the wide-field and high-precision modes, both larger components and the smallest precision parts can be reliably measured. Manufacturer: Keyence International NV/SA Model number: IM-7030 Machine type: Digital measuring projector with optical probe Year of manufacture: 2019 Blodpfxozx Rtvs Abtel Travel ranges in wide-field mode: X-axis: 100 – 300 mm Y-axis: 100 – 200 mm Z-axis: 75 mm Travel ranges in high-precision mode: X-axis: 25 – 225 mm Y-axis: 25 – 125 mm Z-axis: 75 mm Maximum table load: 1 kg Measuring accuracy in wide-field mode: ±1 µm at Ø100 mm ±2 µm at 200 × 300 mm Measuring accuracy in high-precision mode: ±0.5 µm at Ø25 mm ±1.5 µm at 125 × 225 mm Operation: Automatic measurement at the push of a button Control / Software: IM-H2C and IM-H2ED Suitable for series production: Yes Special features of the system include high measuring speed, simple operation without complex programming, and non-contact optical measurement technology. The KEYENCE IM-7030 is ideally suited for use in CNC manufacturing, precision engineering, incoming goods inspection, and industrial quality assurance. The machine can be inspected with power supplied after scheduling an appointment. Changes, errors in technical data and specifications, and prior sale are subject to change!

Condition: excellent (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, table height: 860 mm, plate height: 160 mm, For sale is a used measuring table in very good condition. The stone plate is undamaged and in very good condition. Plate dimensions: Length: 1200mm Width: 800mm Height: 160mm Height from the floor to the top edge of the plate: 860mm Bjdpozuxt Nefx Abtell Center height: 200mm Flatness: DIN 876, accuracy class: 1

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, table width: 680 mm, table length: 855 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Measuring range, X-axis: 400 mm Measuring range, Y-axis: 500 mm Measuring range, Z-axis: 350 mm Maximum workpiece weight: 280 kg Table width: 680 mm Table length: 855 mm MACHINE DETAILS Dimensions & Weight Blsdpfxozu Ixue Abtjl Dimensions (L x W x H): 2,000 x 1,100 x 1,100 mm Total weight: 500 kg

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D probe, SK40 OMP60 probe – used Compact 3D probe With optical signal transmission, it is possible to directly set up and inspect workpieces on the machine and transmit the signal. Possible application area for the probe system for medium and large machining centers, compatible with all optical receivers from Renishaw. Switching methods for the probe can be adjusted. Factory setting for optical on/optical off. Probe stylus, l = 100 mm, Probe ball, Ø 5.0 - ruby ball Mount for OMI-2 receiver - interface Protective hose and fitting for the cable from the receiver unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Operating manual for the OMP60 probe is available in paper form and on CD-ROM. Made in UK Bljdpfxsznk I Se Abtsl RENISHAW OMI-2 transmitter/receiver OMM with connecting cable Machine interface MI12 Honda Tool holder SK 40 Price negotiable Our asking price is €4,190.00 net, ex works, plus packaging costs. All technical specifications are subject to printing errors and changes. Sale exclusively to countries within the EU.

Condition: used, Werth Type: Werth SCOPE-CHECK 400 3D coordinate measuring machine Technical data: Measuring capacity (X x Y x Z): 400 x 200 x 200 [mm] Work table with integrated electrical cabinet: 1600 x 950 x 780 [mm] Max. weight on table: 20 [kg] Operating conditions: * Relative humidity: 40 - 70 [%] * Temperature: 10 - 40 [°C] Measuring precision (20°C, 8 kg, magnification 5X, resolution 0.5 microns) On table, E1 = 1.8 + L/120; E2 = 2.0 + L/150 All positions, E1 = 2.5 + L/120; E2 = 2.9 + L/100; E3 = 4.5 + L/75 Incremental scales Ball screw drive with servo motor Optical magnification (video): 0.5X to 5X Optical field (video): 13 x 10 [mm] to 1.3 x 1 [mm] Movement on linear guide with ball bearing Combinable lighting: diascopic, episcopic, ring-shaped LED/axial Voltage: 230 [V] Frequency: 50 [Hz] Power: 2 [kW] Weight: 300 [kg] Bjdszh Dq Hjpfx Abtell Accessories CN Lighting control via software Video sensor IP for detection of measuring contour (screen display) Electronic control for table movement Manual control for table via joystick Predisposition for mechanical probe Calibration, 3D measurement, probe communication software Software: WinWerth v8.40 Scope of delivery: (Werth coordinate measuring machine with accessories as shown) Condition: used (Changes and errors in the technical data are subject to change!) Please inquire about transport options before purchase. We will be happy to answer any further questions you may have by telephone.

Condition: not inspected (used), Mitutoyo Quick Vision Apex QV-X404P1L-C CNC Image Processing Measuring Machine / Optical Measuring System Manufacturer: Mitutoyo Corporation Type: QV-X404P1L-C Code No.: 363-131EU Professional CNC image measuring system for non-contact dimensional measurement tasks. For sale is a used Mitutoyo Quick Vision Apex CNC image processing measuring machine, including the existing PC system, two monitors, control unit, measuring software, and extensive documentation. The existing PC system and the installed QVPAK software start. However, the complete machine and measuring function could not be fully tested. The Quick Vision series is used for non-contact dimensional measurement of workpieces using an optical system, image acquisition, and image processing. Suitable for precise measuring and testing tasks, including those involving components from the electronics, precision mechanics, and industrial manufacturing sectors. Technical data: Manufacturer: Mitutoyo Corporation Model: Quick Vision Apex Type: QV-X404P1L-C Code No.: 363-131EU Country of manufacture: Japan Machine type: CNC image processing measuring machine Measuring range X / Y / Z: approx. 400 × 400 × 250 mm Measuring principle: non-contact optical image measurement CNC-controlled measuring system Existing measuring software: Mitutoyo QVPAK QVPAK (R): Version 7.502.0010 QVGEO: Version 7.502.0010 Statistics: Version 7.502.0010 Equipment: Mitutoyo Quick Vision Apex measuring machine PC workstation Fujitsu Siemens CELSIUS PC system 2 Fujitsu monitors Keyboard and mouse Mitutoyo control unit / joystick with emergency stop QVPAK measuring software Mitutoyo MCOSMOS / MiCAT data carrier GEOPAK documentation QVPAK documentation Other Mitutoyo operating manuals and documents Clamping plate / workpiece fixture as shown in the picture Bodpoztyabsfx Abtjll Connecting cables and accessories as shown in the picture Application areas: Optical dimensional inspection Non-contact workpiece measurement Quality assurance Precision measurement technology Component and contour inspection Manufacturing and process control Scope of delivery: Mitutoyo Quick Vision Apex QV-X404P1L-C with PC workstation, monitors, control unit, existing software, documentation, and accessories as shown in the pictures. Scope of delivery is limited to what is shown in the pictures. Condition: Used Optical condition according to the pictures PC system and existing QVPAK software start. Signs of wear and tear due to age and use are present. Visible damage / signs of wear are present on the machine housing, see pictures. Important note: The machine has not been tested because it is in a protection mode after being moved. This is also intended by the manufacturer during machine transport. The machine must be put back into operation by qualified Mitutoyo personnel. Shipping by freight forwarder is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 7,000 mm, measuring range Y-axis: 3,150 mm, measuring range Z-axis: 2,400 mm, Coordinate measuring machine in double-arm design TECHNICAL DETAILS X-axis measuring range: 7,000 mm Y-axis measuring range: 1,600 mm YT-axis measuring range: 3,150 mm Z-axis measuring range: 2,400 mm Probe head licenses License: PC-DMIS, NodeLocked PC-DMIS Option – World Axis PC-DMIS – CAD++ (DCC CMM) PC-DMIS Option – Tool Changer PC-DMIS Option – Wrist PC-DMIS Option – Require Hasp PC-DMIS Interface – Leitz (B&S) Measuring conditions Temperature range: 16 – 26 °C Max. temperature gradient (over time): 1.5 °C/h Blsdpfxoyla Iws Abtsl Temperature gradient (over 24h): 5 °C/24 h Temperature gradient (spatially): 1 °C/m Measuring accuracy MPEe for single arm: 20 + 13 L / 1,000 ≤ 55 µm MPEe for double arm (Yt = 3,150): 30 + 15 L / 1,000 ≤ 80 µm MPEp: 20 µm Measuring technology Probe head: CW43L (continuous) Probe: TP6 Stylus length: 40 mm Resolution: 1 µm Dynamics 3D positioning speed: 52 m/min 3D acceleration: 2.0 m/s²

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Faro Gage Plus measuring arm with 6 axes Measuring arm length: 4 ft (approx. 1.2 m) Accuracy: 5 + 8L/1000µm Bedszwkphspfx Abtell Includes measuring table, accessories, and matching transport case Includes operating instructions and manuals.