Used Meca for sale (416)

Condition: used, Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m -Connector: 16 pin Iodpfskrgifjx Aabebc -Dimensions: 600/400/H340 mm -Weight: 13 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, working width: 3,000 mm, stroke length: 180 mm, pressing force: 220 t, TECHNICAL DETAILS Pressure: max. 220 t Folding length: max. 3,000 mm Stroke: max. 180 mm Ibsdpeu S N Htofx Aabjc Control: Delem DA 58 Controlled axes: y1, y2, x, r, z1, z2 Tool holder: Amada-Promecam MACHINE DETAILS Total power requirement: 17 kW Machine weight: approx. 12,000 kg Dimensions: 3,660 × 2,380 × 2,800 mm EQUIPMENT - Safety doors behind the machine - 2-hand foot switch

Year of construction: 2004, condition: used, table length 1250 mm table width 1250 mm burner heads 1 Control Fanuc output 1000 Watt travel -z axis 100 mm travel x / y 1260/1260 mm traversing speed 30/30/42 mm/sec gas consuption 10 Liter/Std. total power requirement 22 kW Ibedpfohly Hlox Aabsc weight of the machine ca. 3,5 t dimensions of the machine ca. 10 m

Condition: used, table diameter 500 mm table load capacity 420 kg table height 185 mm centre height 315 mm center hole MK 5 mm indexing 15 ° weight 275 kg dimensions of the machine ca. 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use - Indexing every 15° or continiously variable Isdpfx Ajr Htvnsabobc by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs

Condition: like new (used), functionality: fully functional, power: 80 kW (108.77 HP), axle configuration: 4x4, first registration: 05/2017, Year of construction: 2017, operating hours: 2,118 h, MECALAC 12MTX, year 2017, 2118 operating hours, complete with 3 excavator buckets, mixing bucket, loading bucket, forks, quick coupler Ibjdpfx Aaewx H Raeboc

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911832, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, spindle nose: HSK F63, tool length: 150 mm, tool diameter: 20 mm, tool weight: 3,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, The MECAL MC302 GEOS-5 5-OSI machining center, manufactured in 2014 in Italy, is designed for milling, drilling, threading and cutting profiles made of aluminum alloys, plastics and steel. The machine, equipped with high-end components and innovative solutions, performs machining both on a single working field and inside 2 separate working zones, which translates into a significant increase in the speed and efficiency of the production process. Simultaneous machining on two work zones is possible through the use of a longitudinal work area with a sliding machining station and a chip conveyor. The MECAL machining center for aluminum profiles achieves high structural rigidity, thanks to a base made of quality steel tubes. During machining, the profile is held by special clamps with an independent power system, allowing positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guides. The MECAL GEOS-5 machining center is offered with 3D software, providing a high level of programming flexibility, user-friendly operation and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile milling machine - number of axes : 5 (X,Y,Z,A,C) - feed rate in Y/Z axis : 1570/740 mm - spindle tilt in A axis : ± 120° - spindle rotation in C axis : ± 210° - accelerated feeds in X/Y/Z axis : 70/60/40 m/1 - 3D graphics software - tool storage capacity : 18 - maximum electro-spindle speed : 24000 rpm - power of electro-spindle : 12 kW Isdeu Dl R Ujpfx Aabobc - maximum blade diameter : 500 mm - maximum diameter of side and face milling cutter : 200 mm - central lubrication

Year of construction: 1998, condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch -pneumatically operated Ibodpob A Hwajfx Aabjc -Year of construction: 1998

Condition: good (used), Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 3,800 kg, input voltage: 20,000 V, input frequency: 50 Hz, power: 1,250 kW (1,699.52 HP), type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, Used transformer, tested, working, 15000v to 400v Ibjdpotp H Exofx Aabjc

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ - 2019 as good as new - control system: AMADA - fiber laser 2100 W - table size: 3000 x 1500 mm ( x 2 ) - operating time: 300 hours - documents - weight: 9400 kg Ibodpoiv S Nqsfx Aabsc - under power Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: used, Bit mortiser Ibedpfx Aajr Iqixjbjc 380V

Condition: like new (used), Year of construction: 2018, Single Head Cutting Machine with Ascending Blade Ø 600 mm Single head cutting machine with ascending blade Ø 600 mm, designed for precise and versatile cuts. - Worktop rotation: manual, up to ±20°, both to the right and to the left. - Preselected angles: quick positioning on 90° and 45°. - Intermediate angular positioning: manual with pneumatic locking for any cutting angle. - DIGIT: equipped with digital display for precise positioning of the cutting angle. - MQL: minimal quantity lubrication system for efficient tool management. - Cutting unit rotation: up to ±20°. Technical Specifications - Blade diameter: 600 mm - Blade hole: 50 mm - Blade rotation speed: 2800 rpm Ibjdev I N Eyspfx Aabec - Motor power: 4 kW - Dimensions (L x W x H): 920/1520 x 1320 x 1525/1800 mm - Weight: approx. 470 kg

Condition: like new (used), power: 55.4 kW (75.32 HP), overall weight: 6,270 kg, next inspection (TÜV): 06/2023, Year of construction: 2023, operating hours: 180 h, Selling a Mecalac AS850 swing loader with folding bucket from our rental fleet The swivel loader has 3 steering modes - front wheel all-wheel dog gear The swivel arm of the loader can be swiveled 90° to the right and left Dead weight: 6.27 t Ibodpfxeqt Dkhs Aabsc Tires: 14.5-20 Bucket width: 1,950 mm Bucket capacity: 0.85 m³ Transport length: 5,600 mm Transport width: 1,950 mm Transport height: 2,830 mm Travel speed: 20 km/h Dumping height max.: 2,640 mm Outside turning radius: 3,450 mm Lifting force: 19.12 kN Engine manufacturer: Deutz Engine type: TCD 2.2 L3 Engine power: 55.4 kW Displacement: 2.2 l Max. speed: 280 Nm (at 1,600 rpm) Number of cylinders: 3 Emission: Stage V Hydraulic SW All maintenance is carried out by our service team in accordance with dealer specifications.

Condition: used, Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity sensor Isdjb A Sarspfx Aabebc -Manufacturer: Telemecanique, inductive sensor proximity switch -Type: XSA-H05313D -Number: 13x available -Price per piece -Dimensions cardboard: 140/45/H45 mm -Weight: 0.1 kg/pc.

Condition: good (used), functionality: fully functional, Amada mod. Togu-EU sharpening machine with PLC for sharpening punches and dies of punching machines complete with accessories. Ibsdpfx Ajt Daiwsabsc

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 15,996 h, overall weight: 6,750 kg, input voltage: 400 V, 1000 KN Max. stroke: 200 Weight: 6750 Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV inspection on a regular basis / maintenance always carried out by Amada on a regular basis Accessories: Tool die: 2 pieces UKB 20.478 V8/12 30° 835mm 3 pieces UKB 20.344 V4/V7 88° 835mm Tool holder: 4 pieces UKB substructure for double V die 20.287 + 60.919 835mm Bending swords: 5 pieces UKB 10.261 H100 R0.6/90° 2 pieces UKB 11.158 H80 R0.6/30° 2 pieces UKB 11.200 H66 R0.8/90° Ibedpfotwliwox Aabec Other: Light barrier in need of repair (new price approx. €4500) – separately as a replacement as an attachment (has been renewed) The machine can be inspected under power in DE84051 Mettenbach by appointment. Sale only to commercial customers and with exclusion of any warranty!

Condition: used, mileage: 3,600 km, power: 90 kW (122.37 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 14,900 kg, first registration: 07/2015, suspension: other, operating hours: 3,600 h, Equipment: rubber tracks, 1st hand, diesel Year of construction 2015 3,600 operating hours 90 kW adjustable boom rubber track blade backhoe bucket top condition immediately ready for use 1st hand Operating weight 13,800 kg permissible total weight 14,900 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, PAYMENT ACCEPTANCE OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale; Adjustment arm Iedpfx Asvicudjabsbc

Condition: used, Year of construction: 2007, High-performance CNC machining centre equipped with a 5-axis electrospindle for advanced machining operations on aluminium, PVC, light alloys, and composite materials. Technical Description: - 5-axis electrospindle – A = +/- 90°, 12 kW with cooling unit - Automatic tool changer with 18 positions + Ø400 mm blade, protected and mounted on the gantry sliding along the X-axis - Working area – travel: X = 7500 mm; Y = 1500 mm; Z = 620 mm Ibedpfevgl Rcjx Aabec - Milling operations with linear and circular interpolation on the X-Y-Z axes - Machining on 5 faces - PENDULAR operation capability - No. 8 pneumatic clamps with automatic positioning - No. 2 pneumatic reference stops - Tool cooling system with minimal lubrication unit - CNC, user and maintenance manual, CE certification included

Condition: like new (used), power: 50 kW (67.98 HP), color: yellow, overall weight: 4,710 kg, Year of construction: 2023, operating hours: 120 h, Here we are selling our demonstration machine, a new articulated wheel loader AX700 with folding bucket: Dead weight: 4.71 t Bucket capacity min.: 0.7 m³ Bucket capacity max.: 1.2 m³ Steering type: Articulated Transport length: 5,285 mm Transport width: 1,600 mm Transport height: 2,470 mm Travel speed: 30 km/h Dumping height max.: 2.78 m Lifting force: 35 kN Engine manufacturer: Deutz Engine type: TD2.9 L4 Engine power: 50 kW Ibjdpfx Aaeqt Dndoboc Displacement: 2.9 l Speed at max. torque: 2300 rpm Torque (at 1,800 rpm): 235 Nm Hydraulic quick coupler incl. folding bucket Service intervals are carried out according to the manufacturer's specifications. New UVV and maintenance upon sale.

Condition: used, Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity sensor -Manufacturer: Telemecanique, inductive sensor proximity switch unused original packaging -Type: XS4-P18PA340D -Number: 3x available -Price per piece -Cardboard dimensions: 80/55/H45 mm Iedemu Rnaopfx Aabobc -Weight: 0.1 kg/pc.

Condition: new, Year of construction: 2025, Machining center with 4 CNC controlled axes for machining profiles made of aluminum, PVC, and steel Machine frame in stable welded construction, stress-relieved annealed, with hardened rail guides Protective cabin over the entire machining length Pneumatically opening safety door Milling spindle: 3.8/4.6 KW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with tool holder ISO 30 with minimum quantity cyclic spraying for tools with fill level monitoring Tool magazine: 5 positions, on the left side of the machine bed, for holding drilling, milling, and thread cutting tools, angle head, disc milling cutter up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: One pneumatic reference stop each on the left and right of the A-axis Travel paths: X - Axis 3500mm Y - Axis 370mm Z - Axis 348mm A - Axis ±90° Travel speeds: X - Axis 70m/min. Y - Axis 30m/min. Z - Axis 30m/min. A - Axis 60°/sec Max. working areas: X - Axis 3270mm Y - Axis 250mm at 0° 116mm at ±90° of the A-axis Z - Axis:170mm at 0° 200mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining by swiveling the A axis 90°-0°-90° Face machining using a disc cutter Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivery without power cable Pneumatic: pressure 6 - 8 bar Ibsdpowrcwpsfx Aabjc Dimensions and weight: Length: 5800mm Width: 1640 mm Height: 2000mm Weight: 2000 kg incl.: graphical programming software CM3D/CAD3D barcode reader additional network connection incl. remote maintenance/diagnosis for 1 year

Condition: used, Inductive sensor, electronic sensor, sensor cable, connection cable, connection cable -Manufacturer: Telemecanique, ready-made sensor cable orig -Type: XZC-P1164L5 -Order No.: 076311 -Number: 10x cables available Iodpfx Aaoir A Rljbobc -Price per piece -Dimensions packaging: Ø 190 x 30 mm -Weight: 0.3 kg/pc.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Iodpfxogag Aho Aabebc -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Condition: used, Monitoring module, safety module, controller, safety relay, relay -Manufacturer:Telemecanique, safety relay -Type: XPS-AL/SerieB Iodpedngwcjfx Aabebc -XPSAL5110 -Snap fastening on: 35 mm standard rail -Price per piece -Number: 6x available -Weight: 0.2 kg

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos Iedpfxjri Unxj Aabsbc -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor Ibedpfx Aekia T Hjaboc -Manufacturer: Telemecanique, Contactor Square D -Type: LC1D096 LR3D 086 -Number: 2x contactor available -Price per piece -Dimension: 125/45/H85 mm -Weight: 0.5 kg/pcs