Used Metal Cutting Band Saw for sale (43,788)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 1-phase 230V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Codpe Agwkxofx Aizsri Weight [kg] gross/net – 210 / 180 kg

Condition: new, Model Name Crodpfsgvkctex Aizoi Shark 282 SXI evo

Condition: new, Model Name Shark 281 CCS Crsdpjgvkchefx Aizei

Condition: new, Model Name Shark 281 SXI evo Csdegvkglspfx Aizori

Condition: used, Year of construction: 2008, functionality: fully functional, miter ja cooling ja weight of the machine ca. 400 kg Crjdeyacp Topfx Aizei

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 12,000 mm, total width: 7,000 mm, Equipment: CE marking, documentation/manual, Complete tube processing system from 1999, consisting of the following components: Cjdpfx Aoz S U Uveizsri 1. Automatic tube feeding system for tubes up to 7,000 mm in length. 2. BEWO ECH-110-M - Tube circular saw for sections with a diameter of 10 - 110 mm and a length of 250 to 3,000 mm. 3. BEWO DB-90 - Tube deburring machine. 4. ROWAMAT RL-3000 - Cleaning machine for tube sections up to 3,000 mm in length. The complete system can be inspected by appointment at ELIT INOX d.o.o. in 32000 Cacak, Serbia.

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting width (max.): 440 mm, control type: PLC-controlled, total height: 1,600 mm, total length: 3,300 mm, total width: 1,500 mm, overall weight: 4,700 kg, cutting range round steel at 90°: 440 mm, Equipment: CE marking, documentation/manual, Automatic band saw for Aluminium, capacity Ø 440 mm, 90°-cut, cutting speed 200-1100 m/min stepless, motor 22 kw, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device with filter, dimension 3300x1500x1600 mm, weight ca. 4700 kgs Csdpfxoy Awago Aizori

Condition: excellent (used), functionality: fully functional, overall weight: 1,600 kg, AMADA HA250 automatic bandsaw -Total power consumption: 3.7 kW -Machine weight approx.: 1.6 t -Blade length: 3505x32x1.1 mm (+3 new blades included) -Voltage: 380 V -Cutting diameter: 0 - 250 mm -Cutting capacity: 250x300 mm -Coolant pump -Chip conveyor -Blade cleaning brush Original machine in excellent technical condition, ready for operation. Can be viewed in Głosków, near Warsaw. Documentation included. Credpfx Aiozzph Dezji Delivery to any location within the country is possible.

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm -Quantity: 2x box available Crodpfjvu S Tmsx Aizsi -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

Condition: used, Year of construction: 1986, Technical details: cutting diameter: 320 mm saw band length: 5320 mm saw band width: 32 mm cutting range 90 degrees: round: 320 mm cutting range 90 degrees: flat: 320 x 320 mm control: Serie P 9521 height over floor: 730 mm band speed: 15 - 110 m/min total power requirement: 4,9 kW Credpju Nii Sofx Aizsi machine weight approx.: 2200 kg dimension machine xH: 1,9 x 2,95 x 1,8 m Heavy-duty hydraulic production band saw in 2-column design - fully automatic Application for: Solid and profile materials made of steel as well as cast iron, light and non-ferrous metal Hydraulic material feed, hydraulic clamping of the clamping jaws Length measurement via precision glass measuring rod length 400mm Max. cut-off length preselectable 9999.9mm Automatic multiple stroke Saw band cleaning brush + 1x spare brush Chip conveyor Coolant device *

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 22 kW (29.91 HP), Item No. 5.4-783 1 used automatic band saw Kasto KASTO HBA A10x12, year of manufacture 2004 Roller conveyor Chip conveyor Coolant system Technical data: Cutting range (round) 300-1260 mm Cutting range (square) 1060x1060 mm Cutting speed (variable) 12-90 m/min Saw band dimensions 11430x80x1.6 mm Csdpfx Aisz Ehryozsri Total drive power 20 kW Machine weight (approx.) 15500 kg Technical data, accessories and machine description are non-binding.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 15 h, cutting height (max.): 300 mm, total height: 1,420 mm, total length: 2,050 mm, total width: 1,170 mm, overall weight: 650 kg, cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 300 mm, warranty duration: 6 months, PEGAS-GONDA 300x320 SHI-LR – Semi-Automatic Band Saw Year of manufacture: 2024 | Showroom Demonstration Machine | Excellent Condition We offer a PEGAS-GONDA 300x320 SHI-LR semi-automatic metal cutting band saw, manufactured in 2024. The machine was used as a demonstration unit in the manufacturer's showroom and has not been used in regular industrial production. PEGAS-GONDA is a Czech manufacturer known for its extremely robust machine construction, reliability, and long service life. This model is designed for demanding industrial applications and precise cutting of steel profiles, pipes, and solid materials. Main Technical Specifications Machine type: Semi-automatic hydraulic band saw Cutting capacity at 90°: Ø 300 mm / 320 × 290 mm Cutting angles: +60° right / −45° left Saw blade dimensions: 3660 × 27 × 0.9 mm Blade speed: 20–100 m/min, continuously adjustable Blade motor power: 2.4 kW Control system: Mitsubishi PLC with display Hydraulic material clamping and saw frame movement Automatic cutting feed protection (PEGAS BRP) Power supply: 3 × 400 V / 50 Hz Machine weight: 650 kg Dimensions: 2050 × 1170 × 1420–2040 mm Condition and Price The machine is in excellent condition, having been used only for showroom demonstrations. Our price: EUR 7,900 Manufacturer's list price for a new machine: EUR 11,441 (with warranty), according to the 2026 price list. Credpfe Aarp Sex Aizoi An excellent opportunity to purchase a high-quality European-made industrial band saw at a significantly reduced price. Location: Czech Republic Inspection possible by prior arrangement. Please contact us for further information.

Condition: new, Robust double miter metal bandsaw for professional use in metal and container construction, with hydraulic lowering of the saw frame. Technical data: Cutting range: 0° round: 315 mm 0° square: 270 mm Cjdpfx Aow Hxapeizori 0° rectangular: 250 x 400 mm 45° round: 280 mm 45° square: 280 mm 45° rectangular: 300 x 280 mm 60° round: 180 mm 60° square: 140 mm 60° rectangular: 140 x 180 mm -45° round: 250 mm -45° square: 220 mm -45° rectangular: 280 x 200 mm Cutting speed: 35 / 70 m/min Saw blade: 3460 x 34 x 1.1 Work table height: 970 mm Motor power: 2.2 kW Motor coolant pump: 100 W Dimensions, approx.: 2270 x 970 x 1140 mm Weight, approx.: 580 kg Features: - Double miter saw with swiveling saw frame from -45° on the left to -45° on the right - Ideal for cutting pipes, profile material, and solid material made of stainless steel, iron, etc. in commercial applications - Generously sized saw arm made of cast iron for vibration-free operation - With 2 saw speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results - CE/IEC, German documentation and German service Scope of supply: - Bi-metal saw blade 3460 x 34 x 1.1 mm - Belt tension adjustable via manometer - Carbide guides - Quick-release vise - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor circuit breaker - Automatic shutdown after the end of the cut - Base frame While supplies last.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401511001, functionality: fully functional, operating hours: 25 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT X-CNC-M | CNC | MIRROR VERSION | SAVE 44% EXCLUSIVE CNC DEMONSTRATION MACHINE – LEFT-HAND MATERIAL FEED – DIRECTLY FROM THE MANUFACTURER! We are selling a fully automatic two-column bandsaw, PEGAS-GONDA 540 HORIZONT X-CNC-M, directly from our showroom. M = MIRROR (MIRROR VERSION) This special version of the 540 HORIZONT X-CNC features a mirrored material feed: the material is fed from the LEFT instead of the usual right side. The perfect solution for production halls where the spatial conditions do not allow for material feed from the right! The machine offers complete CNC control for angular positioning, material feed, and sawing process. Demonstration machine, not used in regular production. Sale due to the renewal of our showroom equipment. SPECIAL PRICE – 44% SAVING! List price: 105,299 EUR Our price: 59,000 EUR plus VAT. You save 46,299 EUR! TECHNICAL DATA Model: 540 HORIZONT X-CNC-M (MIRROR) Fully automatic CNC two-column bandsaw Material feed from the LEFT CNC-controlled angle adjustment: ±45° Round cut at 90°: 540 mm Rectangular cut at 90°: 750 × 490 mm Saw band: 6880 × 41 × 1.3 mm Band speed: 15–150 m/min Main motor: 5.5 kW Weight: approx. 3,875 kg SIEMENS SIMATIC S7-1500 PLC SIEMENS TP700 Comfort Touchscreen Cedpj Aa Dmvofx Aizori CNC-controlled material feed Feed stroke: 2,000 mm Multiple feed: up to 19,999 mm Servo-controlled saw feed Automatic cut adjustment (ASR) Up to 100 cut programs 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer only bears the travel and transportation costs. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 59,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport to the customer, commissioning, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES A wide range of original accessories are available (see accessory price list). We recommend matching PEGAS-GONDA roller conveyors for the left-hand material feed. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: Special MIRROR version with left-hand material feed Fully automatic CNC operation Directly from the manufacturer 46,299 EUR price advantage 6 months warranty Original manufacturer service Immediately available Contact us for a viewing or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP 8-meter infeed table 6-meter outfeed table Crsdpfx Aszzp Epsizoi If you have any questions or would like more information, please feel free to send us a message.

Condition: used, Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg Crsdpsqufthefx Aizoi

Condition: used, The HEMA Garant 500 band saw, in as-new condition, cuts timber workpieces using a circulating band saw blade for general woodworking tasks. The swivelling table and the stop facilitate straight and angled cuts, whilst the special upper and lower roller guides guide the band saw blade along the workpiece. Crsdpfxjz S Aggj Aizei Technical data: - Roller diameter: 500 mm - Motor: 1.5 kW - Cutting height: 275 mm

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 4310 mm saw band width: 27 mm cutting range 90 degrees: round: 260 mm cutting range 90 degrees: square: 400 mm band speed: 17 - 110 m/min electrical connection: 400/50 V / Hz. total power requirement: 4 kW machine weight approx.: 1,22 kg dimension machine approx.LxWxH: 2,4 x 1,0 x 2,0 m dimensions L x W x H: 3,0 x 0,4 x 0,8 m SBA 260/400 U = Fully Automatic Version ·Fully automatic sawing operation Crsdjy Dc N Ajpfx Aizsi ·Automatic shutdown after completion of the cut ·Various accessories included (saw blades) ·Roller conveyor included *

Condition: excellent (used), For sale: a professional, industrial metal-cutting bandsaw, PILOUS ARG 380 Plus S.A.F., manufactured in 2010. The machine is in continuous operation and shows normal signs of wear and tear, as can be seen in the photos (paint scratches). However, from a technical and mechanical standpoint, it is in perfect working order and ready for heavy-duty use. Credpfxo Adyqxj Aizoi Key features and technical condition: • Full semi-automatic operation (S.A.F.): Fully functional hydraulic cycle. When START is pressed, the machine automatically clamps the hydraulic vise, starts the bandsaw blade, performs the cut with the set feed rate, and automatically lifts the arm and opens the vise upon completion. • Smooth speed control: The built-in inverter works flawlessly, allowing smooth adjustment of the blade speed in the range of 15–90 m/min from the control panel. • Mechanical condition: The linear guides of the arm and the rotary table are clean and undamaged. The structure is rigid, with no cracks in the housing or hidden defects. • Powerful capabilities: Cuts materials and rolls with a diameter of up to 380 mm. The machine is massive (weighs approximately 1000 kg), which guarantees no vibrations and perfect cutting geometry.

Condition: used, Year of construction: 2000, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 550 mm, cutting width (max.): 650 mm, total length: 2,250 mm, total width: 3,700 mm, overall weight: 2,400 kg, Equipment: CE marking, documentation/manual, lighting, motor brake, For sale: immediately available, fully operational vertical bandsaw, Friggi 104/FG 700 TS, manufactured in 2000. Work surface: 1200mm x 1500mm Table load capacity: 1000kg Vertical cutting capacity: 550mm Codpfx Ajzvhr Dsizsri Horizontal cutting capacity: 650mm The machine is available for immediate delivery! Technical specifications can be found in the photo!

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg Csdpjva E E Tefx Aizori dimension machine xH: 0,8 x 0,7 x 1,65 m Steel and metal band saw Filing band length 2550 mm Additional equipment: Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Saw length 4318 mm Crjdpfxoiwlmco Aizoi

Condition: used, Metal band saw blade, band saw blade -Condition: unused in original packaging Cedpfx Ajcud I Njizeri -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 1008360, Offer 26291 Technical data: - Cutting range at 90°: - Round: 310 mm Cods Ahnicepfx Aizjri - Flat: 520 x 310 mm - At 45° left, flat: 350 x 310 mm - At 30° left, flat: 230 x 310 mm - At 45° right, flat: 260 x 310 mm - Miter adjustment, left and right - Smallest material dimensions, round/flat: 10/10 x 8 mm - Smallest cutting length: 40 mm - Digital miter angle display - Saw blade dimensions: 5000 x 34 x 1.1 mm - Cutting speed, continuously variable: 20 - 140 m/min - Cutting pressure, continuously adjustable: 0 - 10 m/min - Hydraulic material clamping system with tension pressure regulation - Bundle clamping device - Micro-spray coolant system - Total drive power: 400 V / 6.0 kW - Space requirement: approx. W 3000 x H 1600 x D 1750 mm - Weight: approx. 1900 kg - 9 pieces of height-adjustable infeed and outfeed roller stands

Condition: used, metal band saw blade, band saw blade, metal saw band Cedjikbruopfx Aizeri -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs