Used Cutting Tools for sale (42,707)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Itedpszibqasfx Anijn Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: excellent (used), For sale: Hypertherm Powermax 800 D plasma cutter in very good condition. /////Price stated is for 1 unit/////. Isdpfxoz Sb I Do Anistn Hypertherm Powermax 800 plasma cutter Plasma cutter description: The Powermax800 plasma cutting system uses an inverter power supply to provide smooth DC output voltage, ensuring excellent cutting and grooving quality for mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a constant output current with a variable range from 20 to 50 amps, ensuring optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and pierce metals up to 1 inch (25 mm) thick.

Condition: used, Year of construction: 2004, functionality: unexamined, We are offering this used Kjellberg FineFocus 600 plasma cutting machine, including a new torch and wear parts, manufactured in 2004. Ijdpfxjzn Hilj Aniotn If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of cooling: air, input current: 16 A, Duramax Lock H75°6m Design: · Professional plasma cutting machine for cutting metals up to a recommended thickness of 16 mm (max. 29 mm) · Manual and machine operation with CNC interface and FastConnect™ torch connection · Patented technology for cutting with surface contact · Automatic adjustment of air pressure via Smart Sense™ technology · Marking, scribing, and precise beveling with the new low-amperage process Itedpfsz D Akuex Anion · Duramax® Lock torches are designed for high impact resistance and temperature resistance Scope of delivery: includes torch and ground cable Workshop-tested used unit

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 Ijdpfx Asvi Enaeniotn - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Connection voltage: ~230 V Frequency: 50 Hz Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Iedpfx Anez D Tq Eoistn Mechanical protection: IP 21 Total weight: approx. 3500 kg Year of manufacture: 2008 Plasma: TRC-121 OTC Daihen D-12000 30-120A Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, EX-Trafire 30H Hand System starter 230V Plasma system Portable and powerful Cutting performance Cutting width (mm) (structural steel) 10+ Recommended (mm) 8 Piercing (mm) 8 Cutting current (A) 10-30 Duty cycle: 100% @ 21A - 88.4V 60% @ 25A - 90V Iodpfx Anjz D Aiweistn 35% @ 30A - 92V Voltage 220-240 V Air flow (lpm/bar) 48/4.5 Pressure (max) (bar/psi) 10/145 Dimensions W x L x H (mm) 165 x 480 x 290 Includes hand torch FHT-EX 30H and wear parts Starter kit

Condition: used, functionality: fully functional, machine/vehicle number: 11.031.802, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Robust and simple design Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Iedpfoy U Uqtox Anijtn Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 Iodoz N Dutjpfx Anistn MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Year of construction: 1979, condition: good (used), May WH50 relief grinding machine Data: Manufacturer: Rhode & Dörrender (May) Type: WH 50 year of manufacture: 1979 small grinding Ø: 3mm gr.grindingØ: 50mm weight: 1,35t footprint: 1520 x 1600mm Application range: 2 to 4 cutting tools round and relief grinding Iedpfx Aehadxcjnietn Suitable for grinding molding tools Diaform dresser

Condition: excellent (used), Electric, handheld nibbler TruTool PN 200 Product features Itedsz Sb Hmspfx Anijn The new TruTool PN 200 oscillating shear is primarily used for cutting C-L-U profiles, trapezoidal sheet metal, and other similar elements. The device features a short tool for processing sheet metal with a profile depth of up to 85 mm, as well as C-L-U profiles. Also suitable for corrugated sheets. Ideal for hard-to-reach places. The working direction can be easily adjusted by 360° in 45-degree increments without the need for tools. Minimum changeover time: Punch and die can be replaced quickly and easily, without interruptions and without tools. Unmatched speed: Fast and efficient, 2.1 meters per minute for structural steel with a strength of 400 N/mm². Applications: Trapezoidal sheet metal For cutting profiles with a depth of up to 86 mm and a width of 132.5 / 40 mm. For straight and angled cuts. Profiles For cutting C-L-U profiles. Corrugated sheet metal For trimming and cutting. For angled cuts, as well as internal and radial cutouts. • MAXIMUM SHEET THICKNESS: • MAXIMUM SHEET THICKNESS FOR STEEL 400 N/MM²: 2 mm • MAXIMUM SHEET THICKNESS FOR STEEL 600 N/MM²: 1.5 mm • MAXIMUM SHEET THICKNESS FOR STEEL 800 N/MM²: 1 mm • MAXIMUM SHEET THICKNESS FOR ALUMINUM UP TO 250 N/MM²: 3 mm • RADIUS: • SMALLEST RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • NUMBER OF STROKES AT NOMINAL LOAD: 1500 1/min • STARTING HOLE DIAMETER: 24 mm • RATED POWER INPUT: 550 W

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm MACH-ID 9710 Make: GRESSEL Type: Duogrip 125mm Year: 2012 Itedpfxsz Arige Anisn Length:490mm Width:125mm Height:120mm Weight:55kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Itsdpfx Aszkbirsnijn Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Steady rest COLCHESTER Magnum Itedpfx Aezcnw Ienijn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, overall weight: 50 kg, total height: 150 mm, total length: 830 mm, total width: 180 mm, Metal cutting Tooling CERATIZIT - CORALINE HDG-2 MACH-ID 9707 Make: CERATIZIT Type: CORALINE HDG-2 Year: 2018 Length:830mm Width:180mm Height:150mm Weight:50kg Length:830mm Width:180mm Height:150mm Iedpoz Dtzkefx Anistn Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, 400mm swing, Itsdsz Hatfepfx Anisn 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Iedpfx Asxu E Nqjnietn Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm Iodpfxozdidtj Anistn 3 Chuck: x Spindle bore:75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, Plasma cutting machine Ijdpfx Aozpbmuonistn Suitable for steel up to 40 mm.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Itsdpfx Aowrnf Eenijn Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: used, Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Daumenloch Druchmesser 20mm Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Thumb Cut 20mm  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Itsdpfx Ajx Rdc Rsnisn On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions. Ijdpsz Rk Nmsfx Anietn

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Length:430mm Width:130mm Height:125mm Weight:32kg Iedpfez Arhisx Anietn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1976, Deckel FP3 tool milling machine with 3-axis Heidenhain digital display, the machine is in good condition. Rigid table, SK 40 spindle taper, accessories: various collets and arbor holders, counterholder. Good, operational condition. Can be demonstrated under power by arrangement. Itjdpfx Ajxbx R Usnion

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm Itjdsz N Sgkepfx Anien power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.