Used Metal Stacker for sale (36,505)

Condition: used, machine/vehicle number: IC1470, Year of construction: 2022, operating hours: 1,059 h, load capacity: 1,400 kg, lifting height: 4,690 mm, fuel type: electric, mast type: triplex, construction height: 2,030 mm, enginetype: Electric, manufacturer: Jungheinrich Bdjdpfxezv A R Is Andei Serial Number: 90674186

Condition: used, functionality: fully functional, machine/vehicle number: 6631543, Year of construction: 2018, operating hours: 1,130 h, load capacity: 1,450 kg, lifting height: 4,150 mm, fuel type: electric, mast type: simplex, construction height: 2,620 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Chassis number: 6631543 Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Polyurethane Bedpfx Ano Afr Irodedi Rear tire type: Polyurethane Battery type: Lithium-ion Battery condition: 80 - 100%

Condition: excellent (used), Year of construction: 2026, operating hours: 3 h, functionality: fully functional, machine/vehicle number: DS-62-607, total length: 1,760 mm, total width: 1,610 mm, total height: 2,085 mm, overall weight: 1,120 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, table height: 900 mm, input current: 14 A, This Q-Fin DS600 comes from our showroom in Bergeijk and is now available for sale. The machine has only been used for demonstrations and is therefore in excellent condition. The DS600 is fully operational and can be inspected and tested by appointment in our showroom. Bsdpfxo Agm Rvo Andsdi The DS600 is a powerful stand-alone slag hammer for the quick and efficient removal of metal slag from thermally cut sheet metal up to 600 mm wide. The machine is specially designed to effectively remove slag formation after the cutting process, making it an ideal first step in the finishing process. By removing metal slag in advance, it is prevented from causing damage to subsequent machines during further processing. In addition, the DS600 reduces contamination within the production process and positively influences the lifespan of abrasives and other consumables. The DS600 offers an efficient alternative to the manual removal of metal slag. This significantly reduces the physical strain on operators and allows products to be processed faster and with a more consistent quality. Thanks to its stand-alone design, the DS600 can be easily used as a separate machining unit or as a preparation for a subsequent finishing process. The Q-Fin DS600 combines speed, ease of use, and effective slag removal in one compact solution. This makes the machine particularly suitable for sheet metal processing companies that want to optimize their production process and reduce manual operations. This machine is immediately available from our showroom in Bergeijk. Please feel free to contact us for more information or to schedule a demonstration.

Condition: good (used), Year of construction: 2019, operating hours: 2,445 h, load capacity: 1,600 kg, lifting height: 5,616 mm, fuel type: electric, mast type: other, construction height: 2,365 mm, empty load weight: 1,600 kg, mileage: 2,445 km, - Electric triple-mast stacker - Brand: Still (Germany) - Year of manufacture: 2019 ONLY 2,445 operating hours - Capacity: 1,600 kg - Lifting height: 5,616 mm - Mast lowered height: 2,365 mm Bdodez Nvrwjpfx Andoi - Equipped with: FREELIFT - Battery: 2019 - Includes charger - Automatic filling system Watch the video on YouTube.

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has been in almost no operation since then. The system efficiently covers the entire process from stringer prefabrication, main nailing, IPPC marking to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment of almost all components at the push of a button! Bodpfx Ans Afyn Hjdsdi • Main line output: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line output: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens PLC S7 (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2020) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs) hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Independent operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, outfeed buffer. • Support/spare parts long-term secured through successor AVM Metaalbewerking. Pos. 2: Intermediate drive with integrated IPPC marking station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic mode. • Auto-adjustment at the push of a button: width (700-1500 mm) & height motorized via spindle. • 2 lengthwise adjustable marking units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (fully automatic with nesting) • Stable double-column portal with lifting traverse (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Roller conveyor & safety devices • Heavy-duty removal (approx. 5,900 mm), driven with 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and removal are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: excellent (used), mileage: 4,43,951 km, first registration: 03/2017, tire condition: 50 %, axle configuration: 8x4, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, crane, = Additional options and accessories = - Beacon(s) - Hub Reduction - Power take-off (PTO) - PTO - Sun visor = Remarks = Superstructure Year of manufacture: 2016 Crane Remote control: × Rotator: ✓ Clamshell bucket: ✓ Beautiful DAF CF85/510 configured as a Z-crane hook truck, This one is ideal for the recycling industry! In addition to the options already mentioned, it features: -8x4 -Air conditioning -Navi -catching mouth -Extra hydraulics for trailer or environmental container Bdsdpfxszvzp Ns Andsi -Rear camera -Palfinger hook 22 tons -Palfinger Epsilon tap -260Z96 (26 tons and 9.60 extendable etc etc This one is ready for immediate use! = More information = General information Year of construction: 2017 Axle configuration Tyre profile: 50% Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 17.825 kg Functional Crane: Palfinger EPSILON 260Z96, year of manufacture 2016, behind the cab Make of bodywork: Palfinger Extendable superstructure: Yes Tipper: Back Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, Year of construction: 2026, Optimum Metal Bandsaw OPTIsaw S 275NV Metal bandsaws with a swiveling saw blade. S 275NV with continuously adjustable saw blade speed. Article number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400mm Width/Depth (product) approx. 685mm Weight (net) approx. 185kg Width/Depth max. (product) approx. 985mm Height max. (product) approx. 1700mm Electrical data Power of drive motor 1.5kW Connection voltage 230V Mains frequency 50Hz Motor power of coolant pump 90W Machine data Saw blade speed(s) 20 – 90m/min Bodpfx Ajgx T I Ujndjdi Saw blade length 2480mm Saw blade width 27mm Saw blade thickness 0.9mm Cutting angle 0 – 60° Feed rate continuously adjustable Raising of the saw blade manually Cutting ranges Cutting range 0° round (solid material) 225mm Cutting range 0° square (solid material) 190mm Cutting range 0° rectangular (lying) (solid material) 150 x 245mm Cutting range +45° round (solid material) 145mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular (lying) (solid material) 190 x 150mm Cutting range +60° round (solid material) 90mm Cutting range +60° square (solid material) 90mm Cutting range +60° rectangular (lying) (solid material) 120 x 90mm Explanation of cutting range: The cutting range is determined using aluminum due to the weight of the saw blade. It may vary when using different materials and may be smaller in some cases (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm. -Minimum Material Length: 145 mm. -Quick Change System for Straightening Rollers: Standard. -Flattening Gap Adjustment: Servo Hydraulic with PLC Control Bsdjkyrphopfx Andsdi -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm -Total Weight: 40.000 kg..

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Bsdpfx Aoflt Egsndodi Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: new, Year of construction: 2026, MBSM 150-20 Bodpohk Df Dofx Andsdi For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. As additional options you can get: Bdedpfx Aneqxandedoi upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,284 h, load capacity: 1,400 kg, lifting height: 3,244 mm, fuel type: electric, mast type: simplex, construction height: 2,190 mm, drive type: Elektro, High lift truck Mast type: Standard Bodpou Ac N Sofx Andedi Condition: Ready for use and fully functional Technical condition: good

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,913 h, load capacity: 1,600 kg, lifting height: 4,266 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, drive type: Elektro, High lift truck Mast type: Triplex Condition: Ready for use and fully functional Bdedpfx Ansu Adkkedji Technical condition: good

Condition: excellent (used), Metal band saw blade, band saw blade -unused -Number: 7x sheets available -Price: per piece Bdsdjb A S Dcepfx Andei -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm

Condition: used, operating hours: 4,481 h, lifting height: 3,030 mm, fuel type: electric, mast type: duplex, fork length: 1,140 mm, total height: 1,950 mm, total length: 1,750 mm, total width: 800 mm, color: grey, Year of manufacture: 2016 Empty weight: 816 kg Lifting capacity: 1.000 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: F20271G00780 - Operating hours: 4481 - Type: Pedestrian stacker - Lifting capacity: 1000kg - Lifting height: 3030mm - Overhead clearance: 1950mm - Free lift: 0mm - Fork length: 1140mm - Fork width: 560mm - Mast: Duplex - Drive: Electric - Battery information: Bedpfxew Hy N So Andodi - └ Battery year of construction: 2016 - └ Capacity: 200Ah - └ Battery voltage: 24V - Transport dimensions: 1750mm x 800mm x 1950mm (l x w x h) - Transport weight [kg]: 816kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,445 h, load capacity: 1,000 kg, lifting height: 2,924 mm, fuel type: electric, mast type: simplex, construction height: 2,015 mm, drive type: Elektro, High lift truck Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Bjdpfx Ajvizxnsndjdi

Condition: used, Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner Bsdpszh Dn Ejfx Andodi The system has been upgraded with a Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler, and software Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Bdodpfsziar Nex Andoi Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, Equipment: CE marking, Used Cnc folder Ras XL Center 63.30 cnc folder up down folder 3metre For Sale Bdsdpfjym T Iaex Andji Capacity: 126-inch / 3.2 metre (3,200 mm) folding length and can handle up to 16-gauge (1.5 mm) mild steel. Bi-directional Folding: The machine folds parts both up and down, which minimizes material handling by the operator and increases production speed. Precision Technology: It is equipped with five servo-regulated motors for high-speed operation and includes programmable gripper positions for creating tapered or conical parts. Software Control: Features a multi-touch PC control system where operators can draw profiles directly on the monitor; the software then automatically calculates the folding sequence and provides 2D/3D simulations. Design Flexibility: Offers 300 degrees of free space in front of the folding beams, allowing for the creation of complex part designs that standard machines might struggle to accommodate.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 401 - 549, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, bending angle (max.): 135 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 3,800 kg, total length: 7,430 mm, total width: 1,840 mm, total height: 1,950 mm, power: 4 kW (5.44 HP), input voltage: 24 V, Equipment: documentation/manual, emergency stop, foot remote control, The bending auxiliary bar is not included in the sale. Loading is covered by the seller; transportation is covered by the buyer. Bjdpey D E Tksfx Andodi

Condition: good (used), Year of construction: 2017, operating hours: 785 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 785 km, SEVERAL IN STOCK – This DUO electric stacker, manufactured by LINDE in 2017; - Has a capacity of 1,600 kg as a pallet truck. - Lifts 800 kg to a height of 1,010 mm. - The stacker is equipped with an INITIAL LIFT, making it ideal for uneven floors. Bedpsy R Alksfx Andodi - All functions are working properly. - Only 785 hours on the meter; - The stacker is equipped with a battery with an automatic filling system and an INTERNAL charger. - One battery cover is missing. - Delivered within three working days. - Ready for immediate use and, if desired, delivered with an inspection certificate. - Video to follow.

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of manufacture: 2015 Machine type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser system: Dual Laser Material processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 upgrade / modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, involving the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R models. Technical data Build volume (X x Y x Z): 800 x 400 x 500 mm Mains connection: 3P/N/PE AC 400 V ±10 % Frequency: 50 / 60 Hz Max. current consumption: 17 A per phase Compressed air supply: 7 - 8 bar Inert gas supply: 5 bar Cooling: water-cooled system Machine dimensions approx.: 5,300 x 2,700 x 2,760 mm (L x W x H) Weight approx.: 13,400 kg Equipment Dual laser system Powder handling system Material conveying system Filter units Process gas supply Control cabinet technology Operating and control system Work platform with access ladder Water-cooled laser system Existing peripherals as shown in the pictures Documented service work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of the work Operating data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application areas Additive manufacturing of metal components Aerospace industry Automotive industry Tool and mold making Research and development Prototype manufacturing Industrial series production Scope of delivery Concept Laser X Line 2000R BC2 main unit Powder handling components Filter technology Existing peripherals as shown in the pictures Further accessories according to the existing scope of delivery Bjdpfx Ajzcn Efsndsdi Condition Used Machine from industrial production Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Availability: upon agreement. Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 83 h, load capacity: 1,600 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, construction height: 2,000 mm, drive type: Elektro, Reach stacker Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Bdedpfx Aovympmondsi 3rd valve, Fork carriage - inclination

Condition: good (used), Year of construction: 2017, operating hours: 1,885 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, empty load weight: 1,600 kg, mileage: 1,885 km, This electric TRIPLEX stacker by Still from 2017 is in good condition; The capacity is 1,400 kg; The stacker lifts up to a height of 5,316 mm; Clearance height is 2,265 mm; ONLY 1,885 operating hours; Equipped with FREELIFT; The 2017 battery features an automatic filling system and external charger; Schedule an appointment for a test drive; Watch the video on YouTube Bodpew Nn Tpsfx Andjdi

Condition: good (used), Year of construction: 2018, operating hours: 1,326 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, mileage: 1,326 km, - This electric triple-mast stacker from Still, manufactured in 2018, is in good condition. - ONLY 1,326 operating hours. - The load capacity is 1,400 kg. - The stacker lifts to a height of 5,016 mm. - Mast lowered height: 2,165 mm. - Equipped with a FREELIFT. - The battery has an automatic filling system and an external charger. Bodpfsxqa Sxsx Andedi - Make an appointment for a test drive. - Watch the video on YouTube.