Used Mikron 102 for sale (178)

Condition: excellent (used), Control Panel / Keypad Heidenhain Mikron Pgjdpfx Aaelu A Tgeheu Type TE 355 A Id.No. 255 015 02 S.Nr 3787 956 L6

Condition: ready for operation (used), Manufacturer: PFAUTER MIKRON Model: A 15 CNC Condition: Used Serial number: 15.013.03 Nominal workpiece diameter: 100 mm Max workpiece length (with loader): 200 mm Psdpfxexlt Agj Aahegu Max workpiece length (manual): 300 mm Max cutter length: 100 mm Max cutter diameter: 65 mm Max cutter stroke: 100 mm Min.-max. distance between cutter axis and workpiece axis: 10/76 mm Cutter speed: 200.....4000 rpm Machine weight: 5,500 kg

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Pjdpow A Af Isfx Aahegu Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France) Podpfx Aet Hr Aheahjgu

Condition: ready for operation (used), Year of construction: 2001, Control Unit Model Automation Brand HAAS Main Drive Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 550 mm Z-Axis Movement 710 mm Additional Equipment Two coolant pumps: external cooling and internal cooling through the spindle Rotary table for use on the A-axis Renishaw measuring system (without touch probe) This 4-axis MIKRON VCE 1300/40 was manufactured in 2001. It features a large travel range with X = 1300 mm, Y = 550 mm, and Z = 710 mm, and a tool magazine that holds 32 tools with an SK40 chuck. Equipped with a Haas Rotary Table and Renishaw measuring system, it's ideal for precise machining tasks. Consider the opportunity to buy this MIKRON VCE 1300/40 vertical machining centre. Contact us for more information about this machine. Podoxcb Ryopfx Aahegu Application Types Milling

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Pgedpfx Aeqttt Teahsu

Condition: good (used), Year of construction: 2002, Machine is in good condition. Podpfx Astwpameahegu Parts shown by hand not come.

Condition: used, Year of construction: 1997, max. module 2,5 min. module 0,3 control Fanuc 16 M current 19 A total power requirement 12 kVA weight of the machine ca. 5,5 t Manufacturer PFAUTER MIKRON Model A 15 CNC Equipment: - CNC Siemens 840 C - Wet and oil machining are both possible - Manual and electrical circuit diagram High quality and stability, combined with corresponding performance data and modern CNC technology, make the A 15 CNC the ideal gear hobbing machine. Pgjdpfxovu E Nnj Aaheu The short changeover times also allow economical small series production. The impressive quality of Pfauter-Mikorn products guarantees you a trouble-free production process and a long service life for your machine. --> Technical data max. millable module for hobbing: 2.5 mm --> max. millable module for high-performance milling: 2.0 mm --> Number of teeth: 1 - 999 teeth Workpiece data: --> max workpiece Ø automatic loading: 60 mm --> max workpiece Ø manual loading: 100 mm --> max workpiece length automatic loading: 200 mm --> max workpiece length manual loading: 300 mm Working paths: --> X-axis (infeed): 66 mm --> Y-axis (milling length): 150 mm --> Y-axis (shifting): 100 mm --> A-axis swivelling angle (milling head): 50°/50° --> Quill stroke: 110 mm Feed speed: --> X-axis: 0 - 6,000 mm/min --> Z-axis: 0 - 6,000 mm/min --> Y-axis: 0 - 4,000 mm/min Speed range: --> B-axis (milling cutter): 200 - 4,000 min-1 --> C-axis (workpiece): 0 - 375 min-1 Milling performance: --> Motor power 50% ED (B-axis): 3.7 kW Travelling stick: --> max. clamping force: 9 kN --> infeed path: 205 mm Headstock: --> mounting: mechanical --> spindle passage: 32 mm --> Spindle axis from floor: 1200 mm --> Hydraulic operating pressure: 50 bar

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Pgodpfsxg Rvysx Aaheu

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Pgsdpfjwnq Sgox Aahou Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Condition: ready for operation (used), Year of construction: 2000, General Data Measurements width 3680 mm Measurements depth 4130 mm Measurements height 3150 mm Machine weight 10100 kg Control Unit Brand HEIDENHAIN Model TNC 426 M Main Drive Spindle speed range 24000 Number of axis 3 Movement X-Axis Movement 1350 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 750 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 1800 kg Table Number of tslots 10 Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 300 mm Type of tool holder HSK-A63 Pgjdpfxow Ul Dvj Aaheu Additional Equipment High-speed precision machining capability This 3-axis MIKRON VCP 1350 was manufactured in 2000. It features a Heidenhain TNC 426 M control system, X-axis travel of 1350 mm, Y-axis of 900 mm, and Z-axis of 750 mm. The machine supports a maximum workpiece weight of 1,800 kg and includes a high-speed Step-Tec HSK-A63 spindle capable of 24,000 rpm. Ideal for precision machining with a tool magazine capacity of 46 tools. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Pgodpfx Ascl Rurjaheu Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Parts shown by hand not come. Pjdpfer Urm Sox Aahogu

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm Pjdpfx Ajub Amfsahogu - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min Pgodps H I Hdsfx Aahsu electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Pjdpoi El Iasfx Aahjgu Extensive accessories available if required! Please ask if you are interested !

Condition: ready for operation (used), Year of construction: 2013, operating hours: 11,576 h, Control Unit Pedpfow S N Elsx Aahjgu Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 650 mm Z-Axis Movement 500 mm Additional Equipment Automatic cabin doors Kineopt Internal cooling supply with ARO belt filter system and extraction 11380 program run hours, 11500 spindle hours Optional accessories such as clamping devices and tools available This 5-axis MIKRON UCP 800 Duro was manufactured in 2013. Ideal for complex geometries and multi-sided machining, this vertical machining center ensures precision and efficiency. Consider the opportunity to buy this MIKRON UCP 800 Duro vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Pedpfx Aoxcxz Noahogu

Condition: good (used), MAchine come with toolholders. Pgedevk Ng Aepfx Aaheu

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm Pgsdpfjw N S D Sjx Aahju max. module 3 min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: good (used), Year of construction: 2011, operating hours: 25,800 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, total height: 2,270 mm, total length: 3,300 mm, total width: 3,100 mm, rotational speed (max.): 16,000 rpm, overall weight: 6,500 kg, For sale is a 3-axis CNC milling machine from the brand Mikron, model VCE 1000 Pro. The machine is in excellent condition, very well maintained, fully functional, and ready for immediate use. A mountable 4th axis from Lehmann is included in the offer. The machine recently received new guides and a ball screw (KGT) in the X-axis, as well as an overhauled StepTec spindle (unused since refurbishment). Technical data: Control: Heidenhain iTNC530 Year of manufacture: 2011 Control on: 25,800 h Machine on: 24,000 h Spindle on: COMPLETELY OVERHAULED Travel X, Y, Z: 1020, 560, 600 mm Max. distance spindle to table: 735 mm Drive type: Inline motor spindle Max. speed: 16,000 rpm Rapid traverse X, Y: 36 m/min Rapid traverse Z: 24 m/min Tool holder: SK 40 Max. tool length: 305 mm Max. tool diameter: 77/115 mm Worktable: 1000 x 560 mm Max. table load: 1,350 kg Coolant tank capacity: 300 l Dimensions: 3300 x 3010 x 2270 mm Weight: 6,500 kg Integrated belt filter unit Chip conveyor Internal coolant supply (IKZ) 4th axis by Lehmann Transport and loading can be arranged Europe-wide upon request, for an additional charge. All prices are plus VAT. Pjdpfx Ajv Tlf Hjahsgu Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or ways to contact us, visit our website.

Condition: used, functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-axis Heidenhain TNC 114 digital readout and infinitely variable feed Podpfjw Ni Riox Aahegu Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travels X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the Machine: For sale is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, which means it can move to a programmed dimension in any chosen axis (X, Y, or Z) and stops automatically upon reaching it. Four different zero points can be set, and dimensions can be entered as absolute or incremental values. The feed rate is infinitely adjustable from 0–750 mm/min, and can also be regulated during machining. Rapid traverse can be activated at the push of a button, while spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only adjustable when the machine is stationary. The vertical milling head is mounted with three bolts and can be removed and reattached in just 2 minutes. It is hand-fastened using the swing arm seen on the left side of the machine and can be simply swung aside. A key feature of the machine are the large travel distances relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically inspected. Take the opportunity to inspect and test the machine under power on site.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 15,000 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Pedpfsw S N Erjx Aahegu Spindle speed range 20000 rpm Number of axis 5 Movement X-Axis Movement 650 Y-Axis Movement 650 Z-Axis Movement 550 Tools Number of index 30 Type of tool holder HSK63 Additional Equipment Internal cooling supply with ARO belt filter system and extraction 30 tools, HSK63, 20000 rpm Optional accessories such as clamping devices and tools available This 5-axis MIKRON HPM 600U was manufactured in 2011. A vertical machining centre designed for precision and efficiency, it's ideal for complex machining tasks. Consider the opportunity to buy this MIKRON HPM 600U vertical machining centre. Contact us for more information. Application Types Milling

Year of construction: 2024, condition: new, functionality: fully functional, Polyp Scrap Grapple for Terex Fuchs, Sennebogen, Liebherr Capacity: 500 Lt / 0.5 m3 Model: 5 Tinned - Half Closed Pedpfx Asrr Sn Heahjgu

Condition: good (used), Year of construction: 2003, Parts shown on pictures and movie not come. 10.000 rpm, IKZ 20 bar, SK 40, 24 places in toolchanger. Pjdpfew Rq Dtsx Aahegu