Used Mikron Vcp for sale (192)

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Fedpfxsgydn Is Adajpd Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Fsdeqagugjpfx Adaopd

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg Fodpfx Adjykb Hljajpd dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Fodpfow A Af Iox Adaspd Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1033618, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, torque: 600 Nm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,800 mm, total length: 2,900 mm, total width: 2,600 mm, table width: 500 mm, table length: 700 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 10,871 h, number of slots in tool magazine: 24, mount diameter: 40 mm, tool weight: 6,000 g, MIKRON VCE 600 PRO CNC vertical machining center - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Power connection: 16 kW - Tool holder: ISO 40 - Spindle motor power: 12 kW Fpodeyiznaepfx Adaod - Torque at 100%: 600 Nm - Tool change time: 6 sec - Chip-to-chip time: 8 sec - Number of slots: 5 - Slot spacing: 100 mm Note: Without the tool holders shown in the photos! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: good (used), Complete specifications are shown in the photos of the listing. CNC HEIDENHAIN 426 Fpjdpjymgd Isfx Adasd Machine in good working condition, videos available upon request.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 107.32.99.077, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. Fedoxrc Sqspfx Adaepd No private sales.

Condition: used, max. wheel diameter 40 mm gear width 45 mm max. module 1 clamping length max. 75 mm Fjdpjyh Rmgjfx Adaopd number of teeth 5 - 399 hob turning speeds 320 - 3200 U/min weight of the machine ca. 0,6 t Fully Automatic Gear Hobber with Loader for small gears

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Fpodpeilp Euofx Adajd Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Working travels 800 x 500 x 540 mm Table size 910 x 500 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 Fedpfx Ajq Dlciodaepd with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Spindle speeds -10'000 rpm Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories Fodpfxen Hqa Tj Adaopd MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Fjdpfjqi Ufxox Adaopd

Condition: used, table width: 800 mm, table length: 450 mm, A Mikron milling machine is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mikron • Model: WF-21C / 150 • With Heidenhain TNC 150 control • Table: approx. 800 x 450 mm • Condition: Used Fpedpfsympa Eox Adajd Shipping by freight forwarder possible (depending on postal code) International buyers are welcome! You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Fodpfog Nw Rzsx Adaopd

Condition: used, Year of construction: 2001, operating hours: 27,000 h, functionality: fully functional, machine/vehicle number: 107.84.01.011, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, controller manufacturer: Heidenhain, controller model: TNC 430 M, total height: 2,830 mm, total length: 3,200 mm, total width: 2,600 mm, The Mikron HSM 400 is a high-precision high-speed machining center designed for the machining of complex workpieces in tool, mold, and precision engineering. The machine is engineered for high spindle speeds, dynamic axis movements, and outstanding surface quality. STEP TEC spindle, type HVC140-SB-10-15/42-3F-HSK-E40 Spindle hours: 26,897 h Axis drives & dynamics: AC servo motors, ball screw drives Feed rate (X/Y/Z): 0 – 40 m/min Acceleration (X/Y/Z): 1 g (10 m/s²) Speeds & accelerations: B-axis: up to 54,000 °/min C-axis: up to 90,000 °/min Spindle (STEP-TEC) Manufacturer: Step-Tec AG (Switzerland) Tool interface: HSK-E40 Max. speed: 42,000 rpm Power output: 13 kW (40% duty cycle) 10 kW (100% duty cycle) Torque: 4.25 Nm (40% duty cycle) 3.2 Nm (100% duty cycle) Lubrication: oil-air (Alternative configurations up to 60,000 rpm possible as per documentation) Tool & pallet system Fpjdpfx Adjx Hii Ijajd Tool changer: HSK-E40: 18 / 36 / 68 tools Tool change time: approx. 10 s Chip-to-chip: approx. 12.5 s Pallets / clamping systems (depending on equipment): Mecatool GPS: 240 × 240 mm Erowa UPC: 320 × 320 mm System 3R Dynafix: 280 × 280 mm Max. workpiece weight: up to 200 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, type of input current: three-phase, input voltage: 380 V, input current: 20 A, input frequency: 50 Hz, We offer this ready-for-use Mikron WF31D/TNC355 milling machine, year of construction 1989. Vertical and Horizontal machining Fpedpfjyhatljx Adasd Phase voltage: 380 V Frequency: 50 Hz Current: 20 A Power: 9 kW Control circuit voltage: 24 V Diagram number: 152.34.80.805 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2003, functionality: fully functional, coolant tank capacity: 2,000 l, Used, well-maintained transfer machine / rotary indexing table machine / dial-type machine MIKRON MULTISTAR CX 24 Availability: immediately The following modifications have been carried out on the system: Machine: - All motor cables replaced. - All sensor cables replaced. - PLC program adapted to enable and disable collets. - Converted to Knoll coolant system. - Wiring diagram manually modified. - Frequency inverter replaced. - Part selector installed on the machine, including oil pump for oil return. Fpedpfeyk Hraex Adajd Saw: - Saw control converted to Mitsubishi i-QR control system. - Complete electronics of the saw renewed. - Saw fully mechanically overhauled. Accessories: - 1 x loading station (brass D = 3.9 mm) - 1 x unloading station - 1 x part selector (8-position, see picture) - 1 x lateral drilling unit - 1 x rotary straightening device (fully newly mounted October 2023) - 1 x feed / saw unit (control and inverter overhauled in 2021) - 1 x pneumatic loader (via feed tube) - 1 x chip conveyor with dirty water pump (without chip trolley) - 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump, and vacuum pump, including low-pressure pump (5 bar) and high-pressure pump (60 bar) The machine has been operated with cutting oil. If you have any questions or require further information, feel free to send us a message or call us.

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min Fpodpoykb A Hefx Adasd B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: good (used), MAchine come with toolholders. Fpodpfxevk Ng Aj Adaed

Condition: good (used), Year of construction: 2006, Technical details: X 1000 mm Y 1150 mm Z 895 mm 15.000 rpm, HSK 63, 92 places in tool changer, Touch probe will come, laser measuring system. Coolant thru spindle. Parts shown by hand not come. Fpsdpeych D Uofx Adaed Parts shown by hand not come.

Condition: used, Year of construction: 2001, Technical data: Fjdpjt Hr Ahsfx Adaopd Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 Fedpokvrptsfx Adaspd -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Fjdpfx Adow Sxyxsaopd

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Fedpfxjtuwk Us Adaepd

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Fjdpfxsxcxz Nj Adaepd