Used Mitsubishi Fg 18 for sale (368)

Condition: used, mileage: 47 km, power: 85 kW (115.57 HP), first registration: 11/2025, fuel type: electric, maximum load weight: 815 kg, overall weight: 4,250 kg, axle configuration: 4x2, wheelbase: 2,800 mm, color: other, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: other, Year of construction: 2020, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is stated, the current daily exchange rate applies. The valid currency is that of the vehicle's location. Wheel configuration 4x2, single cab, payload 2 t, GVW up to 6 t, wheelbase 2800 mm, heated mirrors, reversing warning system, airbags for driver and passenger, radio with Bluetooth, technical maximum permissible GVW 6000 kg, current registration GVW 4150 kg, up to 4250 kg as a BEV transporter can be operated with a category B driving license (please observe requirements!!). Rsdox Hbp Tjpfx Airjch

Year of construction: 2002, condition: used, functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min Rcodpfxjnh R Nko Airoh wire feed: 15,00 m/min Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 1,006 h, load capacity: 2,500 kg, lifting height: 4,750 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Technical condition: good Rcedpfsu D Rbxox Airsh Front tires type: Superelastic Front tires Condition: 40 - 60% Rear tires Type: Superelastic Rear tires Condition: 40 - 60% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. Sideshift, 3rd valve, front work lights,

Condition: used, mileage: 1,01,561 km, power: 107 kW (145.48 HP), first registration: 05/2007, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: mechanical, emission class: euro4, Equipment: air conditioning, tail-lift, * Mitsubishi Canter Fuso 7C15 4x2 * Box body with tail lift * Air conditioning * Manual transmission * VIN: TYBFE85BH6DU00370 * Engine type: 4M5.2AR-33-69 * kW: 107 * Euro 4 * Displacement: 2977 cc * Unladen weight: 4460 kg * Payload: 2965 kg * Gross vehicle weight: 7500 kg * Wheelbase: 4200 mm * Box interior length: 6.15 m * Box interior width: 2.50 m * Box interior height: 2.50 m Rcodpfxsr Ex Das Aireh * Margin scheme taxation * All information provided without guarantee Tel./WhatsApp:

Condition: new, Mitsubishi HA300NCB-S SPECK NO 84017 + Encoder OSA104 SN J4AVP403AW, unused with signs of storage, 100% functional, scope of delivery as per photos Rcsdpsqx Dfdjfx Aireh

Condition: new, Mitsubishi HA300NCB-S SPEC NO 54016 + Encoder OSA104 J4AVP9V5602, unused with signs of storage, 100% functional, scope of delivery as per photos Rsdpfx Aioqyrrgjrjch

Condition: new, Mitsubishi HC202BS SN W60228019 + Encoder OSA104S2 J4AV3451G, unused with signs of storage, 100% functional, scope of delivery as per photos Rjdpfxoqztuuj Airsch

Condition: new, Motsubishi HC202BS SN W61515002 + Encoder OSA104S2 SN J4AVUJRGK2B ,unused with traces of storage, 100% functional, scope of delivery as per photos Rodpfx Asqztuxeirjch

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Additional equipment Rjdsy Egnxepfx Airoch • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F26-00153, Year of construction: 1997, operating hours: 775 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: simplex, gearing type: automatic, tire condition: 85 %, overall weight: 8,430 kg, empty load weight: 4,930 kg, color: green, Equipment: cabin, head guard, lighting, For sale: forklift - Mitsubishi FD35A Diesel, manufactured in 1996. - Hour meter reading: 775 operating hours. - Lifting capacity: 3.5 tons. Rcodpfx Aisz Sal Ioreh - Mast lift height: 360 cm. - Own weight: 4930 kg. - Complete lighting system. - Forklift in very good condition.

Condition: ready for operation (used), Mitsubishi HD 101-12 servo motor Z636438 SN: N25439018,used, good condition, 100% functional, scope of delivery as per photos Rcjdjufcdxopfx Airjh

Condition: new, power: 129 kW (175.39 HP), overall weight: 7,490 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, total width: 1,995 mm, total height: 2,195 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 7C18 roll-off tipper with municipal hydraulics and Fiedler winter package. 3L turbo diesel engine, 129 kW / 175 hp, EURO 6d Start/Stop automatic 5-speed manual transmission Wheelbase 2800mm Rear axle with twin tires and automatic differential lock Traction tires 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with electronic brake force distribution Ball-head trailer coupling 3-year warranty on the base vehicle from the date of initial registration or up to 100,000 km. Standard cab with the following equipment: Electric windows Electrically adjustable and heated mirrors Central locking with remote control Immobilizer Adjustable steering wheel and steering column Driver airbag Double DIN radio with hands-free system and reversing camera Tachograph with digital technology EC speed recorder Redpjy Sc Ubsfx Airech Storage compartment above the windshield & behind the seat Passenger double seat Driver's seat with armrest Lockable glove compartment Fog lights with automatic daytime running lights Tilting cab Lane keeping assist Brake assist Turning assistant Automatic climate control 900mm hook height Low lifting angle Hydraulic container locking Control panel in the driver's cab Remote control Towing capacity 5000kg Mechanical hook locking Load holding valves on all hydraulic cylinders Emergency stop function Superstructure CE-tested Drive via vehicle hydraulics For roll-off containers with a length of 3200mm. Suitable containers in stock!!!! Additional equipment: * M&S tires * Dimmable LED auxiliary headlights with integrated turn signals (heated) * LED work lights at the rear * Warning markings red - white, 1 set = 4 pieces * Engine-mounted two-circuit universal hydraulic system * 2 double-acting control functions at the front (up/down, left/right, floating position) and 1 working circuit at the rear, * Hydraulic front lifting device with quick-change plate, Multicar system * Wax preservation including Fiedler winter package: spring flap plow FRS 2420, plow width 2.40m (also available as * 2.60m), working width with max. offset 2.20m, 2-cylinder version, curb guards, running rollers, LED plow lighting, warning flags, safety valve set for 2-cylinder version, leak oil line at the front * Spreader Fiedler FFF 2000 permanently mounted on roll-off frame, 2m³ capacity * Control panel in the driver's cab, speed-dependent, etc. * Various cab variants and wheelbases with higher payloads available in the short term. This also makes it possible to realize larger container sizes. Large-volume containers with rear wing doors on the right/left and traversable versions with a hinged rear flap, platform bodies with folding side panels and lattice structures are available at an extra charge. You can find more vehicles of the Fuso Canter and Multicar brands as well as various container sizes at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors Our general terms and conditions apply.

Condition: excellent (used), Year of construction: 2021, SN: 01CS4056, Gewicht 5900 kg, Arbeitsbereich 1.250 x 1.020 x 505 mm, Tischbelastung max. 3.000 kg, Steuerung, Schalt-/Steuerschrank, Nullpunkt-Spannsystem, m. Zubehör Rjdpfx Aszlfa Reirech Der Preis versteht sich als Netto-Ab-Werk-Preis. Demontage, Hebearbeiten und Verladung erfolgen auf Kosten und Risiko des Käufers."

Condition: used, Year of construction: 2011, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, Wire EDM Machine Manufacturer: MITSUBISHI Model: FA20S Year of manufacture: 2011 Rcjdpfez St Tdsx Airsh Control system: MITSUBISHI W31FSA Technical details: X-axis: 500 mm Y-axis: 350 mm Z-axis: 430 mm Workpiece weight: approx. 1,500 kg Condition: Used Technical features & accessories: - External wire pay-off unit - External electrical cabinet - External dielectric tank (TFA20S-A) - External generator Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, number of seats: 3, total width: 1,995 mm, total height: 2,195 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Description: Fuso Canter 7C18 Roll-off Tipper, latest generation Wheelbase: 3400mm. For container lengths up to 4000mm. 3L Turbo diesel engine, 129 kW / 175 hp, EURO 6 Start/Stop automatic 5-speed manual transmission Wheelbase: 3400mm Rear axle with twin tires and automatic differential lock Traction tires: 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with electronic brake force distribution Ball-type trailer coupling 3-year warranty on the base vehicle from the date of first registration or up to 100,000 km. Rjdpfx Aijy T Tx Horoch Comfort cab with the following features: Electric windows Electrically adjustable and heated mirrors Central locking with remote control Immobilizer Adjustable steering wheel and steering column Driver airbag 2 DIN radio with Apple Carplay and reversing camera Tachograph with digital technology EC-approved tachograph Storage compartment above the windshield & behind the seat Double passenger seat Driver's seat with armrest Lockable glove compartment Fog lights with automatic daytime running lights Tilting cab Lane keeping assist Emergency braking assist Turning assistant Automatic climate control Digital tachograph Steering wheel with control unit LED work lights at the rear LED reversing lights * Other cab variants, wheelbases, bodies, and hydraulic systems for snowplows and spreaders are in stock or available for short-term delivery. Please inquire! Roll-off system: KING HZ6 90-degree hook height Push arm system Shallow lifting angle Hydraulic container locking Including remote control Pulling and tipping force: 6000 kg Mechanical hook lock Load holding valves on all hydraulic cylinders Emergency stop function Body: CE-approved Drive via vehicle hydraulics For roll-off containers from: 2800 to 4000mm in length. Various containers in stock!!! Various cab variants and wheelbases with higher payloads are available for short-term delivery. This allows for the realization of larger container sizes. Large-volume containers with rear tailgate on the right/left, as well as drive-through versions with a traversable rear flap, platform body designs with folding side panels, and lattice bodies are available at an extra cost. You can find more vehicles of the Fuso Canter and Multicar brands, as well as various container sizes, at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors. Our general terms and conditions apply.

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Rcsdpfoz Hzz Dox Airjh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,326 h, lifting height: 220 mm, fuel type: electric, gearing type: automatic, battery capacity: 270 Ah, battery voltage: 24 V, battery weight: 150 kg, overall weight: 445 kg, empty load weight: 200 kg, total height: 1,600 mm, total length: 2,500 mm, total width: 800 mm, I am selling an electric forklift manufactured by Mitsubishi. It runs very well and can be tested on-site. The battery is in good condition. It has been inspected, and the defective cells have been replaced. Rcodpfx Ae Aa Aq Tsiroh

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 Rjdpfx Aiezqu Dcersch X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement.

Condition: good (used), mileage: 42,937 km, power: 132 kW (179.47 HP), first registration: 05/2022, wheelbase: 4,300 mm, fuel tank capacity: 200 l, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 6, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Equipment: onboard computer, tail-lift, Year of manufacture: 2022 Rcsdpfj Afck Rox Aireh Number of cylinders: 4 Engine displacement: 2,998 cc Unladen weight: 4,365 kg Payload: 3,125 kg Gross vehicle weight (GVW): 7,490 kg Tail lift: M.B.B., tailgate, 1,000 kg Technical condition: good Visual condition: good = Company Information = Hello

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: 3rd hydraulic function, lighting, pallet forks, sideshift, New price: 12,900 EUR // Old price: 18,900 EUR Mitsubishi IS IN VERY GOOD CONDITION We sell forklifts after a complete service. Prepared for the end-user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklift industry in Poland and many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and perform a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to use. In Poland, upon request, we can arrange for the equipment to be inspected and accepted by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve their logistical problems. We know how to properly prepare the machine and ensure customer satisfaction, leading to recommendations to other customers. We invite you to contact us and utilize our services. Reds Ad Ilqjpfx Airjch Do you need a forklift supplier? Contact us.

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,989 h, load capacity: 2,000 kg, lifting height: 4,750 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 3,778 kg, total length: 2,150 mm, drive type: Elektro, construction width: 1,150 mm, Electric three-wheel forklift Rcedpfx As Afr Rysirjh Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 140/55-9 Rear tire condition: 0 - 20% Battery voltage: 48V Battery capacity: 750Ah Battery year of manufacture: 2015 Double auxiliary hydraulics, integrated fork positioner with side thrust, front and roof windshield, fork adjustment 340 - 1000mm, battery from 2015, 2x work lights at the front, 1x work light at the rear.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Rodpfxez E Su Eo Airoch - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426

Condition: used, functionality: fully functional, mileage: 3,13,000 km, first registration: 09/2026, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2002, MITSUBISHI CANTER 4x2 - Year 2002 DIESEL FUEL / Euro 3 Mileage: 313,000 km (100,000 km) Redpfx Aiez Hnygerjch Manual Transmission / Engine Displacement: 2977 cc / Power: 92 kW GVWR: 35 quintals / License Category: B Payload: 940 kg / Wheelbase: 2500 mm Equipment: TILTING DUMP BODY: 3260 mm x 2140 mm

Condition: ready for operation (used), Mitsubishi HA80CB-SS servo motor, serial number: 180715 + Tamagawa OSE 5KN-6-12-108 encoder, serial number: 66018S, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rcjdpfx Aiji D I R Dsroh

Condition: used, mileage: 1,88,000 km, power: 105 kW (142.76 HP), first registration: 06/2006, fuel type: diesel, overall weight: 6,500 kg, color: red, gearing type: mechanical, emission class: euro3, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,200 mm, Equipment: ABS, air conditioning, central locking, crane, Buy online. Finance digitally. Get it delivered nationwide. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3613] The photos have been processed using AI and are only intended as examples to illustrate the size and equipment of the vehicle. The vehicle is currently being prepared. The images will be updated. ---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * We accept your vehicle as a trade-in, whether old or new Optionally bookable: * 12-60 month used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Mitsubishi Canter 7C14 Tipper | PALFINGER PK 4100 | Air conditioning Load, transport and unload with a single vehicle: Mitsubishi Fuso Canter with a tipper body and a PALFINGER PK 4100 Compact loading crane behind the cab. A versatile combination for construction companies, gardening and landscaping, trades, and material transport. VEHICLE DATA * First registration: 06/2006 * Diesel engine with 105 kW / 143 hp * Displacement: 3,908 cm³ Rcodpfxjz D Rydo Airsh * Manual transmission * 3 seats * Permissible total weight: 6,500 kg * Unladen weight according to vehicle documents: 4,235 kg * Calculated payload according to documents: 2,265 kg * Trailer load, braked: 3,500 kg * Color: Red TIPPER BODY AND LOADING CRANE * Hydraulic tipper body with folding steel side panels * PALFINGER PK 4100 Compact loading crane * Maximum lifting capacity: approx. 1,000 kg * Crane mounted behind the cab and registered in the vehicle registration document * Hydraulically extendable crane boom * Side crane control via joystick * Laterally extendable outriggers with hydraulic support legs * Foldable crane for transport position * Side storage boxes for tools and accessories The loading crane enables the independent loading and unloading of suitable loads within its permissible load diagram. The tipper body also facilitates the unloading of bulk goods and construction materials. OTHER EQUIPMENT * Air conditioning * Suspended ISRI driver's seat * Radio * Digital tachograph * Tow hitch * Orange warning light on the cab * Twin tires in the rear ---- Would you like to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are possible. The photos have been processed using AI and are only intended as examples to illustrate the size and equipment of the vehicle. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.