Used Moby F for sale (33,039)

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Todpfx Aiez Nyd Dorsd (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Tsdoz Hq Rbepfx Airjd Brand new never used. Please check out our other listings as well.

Condition: used, Included in the scope of delivery: 1x load distribution plate, used Material color: Sendzimir galvanized Suitable for manufacturer: Dexion Suitable for shelf depth: 800 mm Overall length: approx. 980 mm C-profile dimensions: 185 x 65 x 35 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 10.07 kg Tedpfedvad Esx Airod Opening for shelf feet: approx. 115 mm The load distributors are suitable for distributing the load over a larger total area. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s Tedpfx Aijzizabjrjd • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. Tjdpfxszwdamo Airsd All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Condition: used, functionality: fully functional, mileage: 2,47,430 km, power: 90 kW (122.37 HP), first registration: 03/2001, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, Year of construction: 2001, operating hours: 5,018 h, Equipment: ABS, power assisted steering, Motorhome, vehicle weight over 2,800 kg: + Bremach + TGR 35.3 / 4x4 + Registered: March 28, 2001 + 247,430 km; 5,018 engine hours + 2 comfort seats + Compressed air connection (compressor can be switched on electrically) + Electric immobilizer + 5-speed manual transmission + Max. speed: 115 km/h + Low gear + Switchable all-wheel drive + Locking differentials + Center console in the cab + Radio + Air intake snorkel + Wind deflectors + 4-cylinder Iveco turbo diesel, 2798ccm; 122 hp, Euro 2 + Unladen weight: 2,050 kg; permissible total weight: 3,500 kg + 600cm x 205cm x 280cm (l x w x h) + Tires: 8.25 R16 LT Todpfjzvqr Hex Airjd Vehicle from the second owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: used, machine/vehicle number: NM0KCTP69XSR94381, mileage: 655 km, operating hours: 22 h, STANDARD RENTAL — no upfront payment, short-term commitment ▪ €2,000 per month, excluding VAT ▪ 2 months' rent in advance ▪ Minimum term of 3 months ▪ Maintenance contract included (maximum 120,000 km per year) Tsdpozulb Tjfx Airod ▪ Insurance not included In addition, a maintenance contract is included, so you don't have to worry about servicing or additional costs. You will benefit from a hassle-free and professional solution, where quality and reliability are paramount.

Condition: used, maximum load weight: 9,920 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2027, loading space length: 7,120 mm, loading space width: 2,480 mm, loading space height: 2,570 mm, loading space volume: 45 m³, total length: 8,900 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2012, Equipment: ABS, Logemann ATS 13 Tandem Trailer – Through-loading system & Edscha – Valid MOT and Safety Inspection until 02/2027 Description: For sale is a tandem flatbed trailer from the manufacturer Logemann (Type: ATS 13). The trailer is in good, operational condition and has a valid safety inspection (SP) until and TÜV (German vehicle inspection) until. Thanks to the practical through-loading system and the Edscha sliding tarpaulin, the vehicle can be loaded flexibly and quickly. Technical data at a glance: * Manufacturer: Logemann * Type: ATS 13 * First registration: 07/04/2012 * Permissible total weight: 13,500 kg * Payload: 9,920 kg * Unladen weight: 3,580 kg * Color: White Equipment & Highlights: * Body: Through-loading system with side curtains and Edscha sliding tarpaulin * Loading area dimensions: Length: 7.12 m | Width: 2.48 m | Height: 2.57 m * Loading volume: approx. 45.51 m³ * Suspension: Air-suspended (raising and lowering) * Axles: Gigant with drum brakes * Safety: ABS and perforated outer frame for optimal load securing * Additional: 1 storage box * Tow hitch: 40mm * Electrical connection: 15-pin * Tires: Size 285/70 R19.5 (Condition: approx. 80%) Tedpez Ewymjfx Airsd Condition & Inspections: * TÜV (German vehicle inspection) valid until: * SP (Safety Inspection) valid until: The trailer is immediately available and ready for use. Viewing is possible by prior arrangement. If you have any interest or questions, please feel free to send us a message or call us! New main inspections/safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ----We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / export license plates We will gladly help you obtain export license plates/short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Tsdsz Nxw Aepfx Airod Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, rotational speed (max.): 4,000 rpm, Fully functional machine from a plastics/wood processing company. In good condition. Machine is available from calendar week 50/2026. Tsdpfx Ajz Ngt Seirsd

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, saw blade guard, scorer, Altendorf F 45 – Panel Saw | ElmoDrive | EvoDrive | ProDrive | HAND GUARD The Altendorf F 45 is one of the highest-quality and most versatile panel saws for professional use in carpentry shops, joineries, interior design, furniture manufacturing, and industrial wood processing. The F 45 impresses with its high precision, robust design, user-friendly operation, and numerous configuration options. Depending on the configuration, it is available with ProDrive, EvoDrive, or the comprehensive ElmoDrive control system. For the highest demands on work safety, the F 45 is also available with the innovative Altendorf HAND GUARD safety system. EQUIPMENT VARIANTS Altendorf F 45 ProDrive Comfortable and clear operation at eye level. The pivoting control unit enables ergonomic operation and precise adjustment of machine functions. Altendorf F 45 EvoDrive Control system with a 7" touchscreen and separate keyboard for comfortable entry of numerical dimensions. The machine axes can be quickly and precisely adjusted. Altendorf F 45 ElmoDrive The most comprehensive control system variant of the F 45. The large 12" touchscreen allows axes and numerous software functions to be conveniently selected and controlled. Altendorf F 45 HAND GUARD For the highest safety requirements, the HAND GUARD is available on the basis of the F 45 with the optical safety system. The camera technology recognizes hands or hazardous situations in the area of the saw blade. In the event of a hazard, the saw unit is lowered, and the saw blade is stopped. After activation, the machine is immediately ready for use again. The HAND GUARD variant is equipped with ElmoDrive. TECHNICAL DATA • Manufacturer: Altendorf • Model: F 45 • Machine type: Panel saw • Control systems: ProDrive / EvoDrive / ElmoDrive • Safety system: optional HAND GUARD • Main motor: depending on the configuration, 5.5 – 11 kW • Saw blade diameter: up to max. 450 mm, larger sizes also possible • Saw blade overhang: up to max. 204 mm • Swivel range: 0 – 46°, double-sided TwinFlex swivel also possible Todpez Nmvajfx Aired • Working height: approx. 850 / 880 / 910 mm • Double roller carriage: up to 3,000 mm • Cutting length: up to 5,000 mm • Cutting width: up to 1,600 mm • CNC parallel fence: optional • CNC angle mitre fence: optional • Tool clamping system: AKE EQUIPMENT AND FUNCTIONS Depending on the configuration, the following are possible: • electromotive height and swivel adjustment • automatic correction of the cutting height during swiveling • motorized or CNC-controlled parallel fence • CNC angle mitre fence • double roller carriage and various carriage lengths • different motor powers • scoring system • various saw blade diameters • RIP FENCE SECURITY • Altendorf HAND GUARD safety system CNC PARALLEL FENCE The CNC-controlled parallel fence enables quick and highly precise positioning. According to the manufacturer, the system achieves a travel speed of up to 250 mm/s with a dimensional accuracy of ± 0.1 mm. AREAS OF APPLICATION Carpentry shops, joineries, furniture manufacturing, interior design, shop fitting, solid wood and panel processing, as well as plastic, aluminum, and industrial wood processing. Inspection and demonstration available by appointment. Nationwide transport, commissioning, and training available upon request.

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist Chain exit: length 2100 mm In good condition Voltage: 380 V Todpfx Aioz Hwg Nerod Weight: approx 250 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method Tedpfjz Hcz Sex Aired - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Todpezx Dwnofx Airod Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: excellent (used), overall weight: 60 kg, Three-jaw chuck Manufacturer: Forkhardt Model: F 315 Diameter: 315 mm Height: 120 mm Jaw height: 175 mm Todpfozw U Stsx Airjd Weight: 60 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, FREY F-LINE F260 + KL6 | Vacuum filler with an attachment for forming kebab slices (Kebab Line) Manufacturer: FREY Maschinenbau GmbH Model / Type: F-LINE F260 + KL6 Serial number: F260PT1392551 Year of manufacture: 2011 Power supply: 400 V / 50 Hz / 3-phase Power: 10.45 kW Filling capacity: up to 7,300 kg/h Maximum filling pressure: up to 50 bar Vacuum pump capacity: 21 m3/h Hopper capacity: approx. 300 liters Portioning range: 5 - 100,000 g Maximum portioning speed: up to 1,120 portions/min Control system: FREY Touch Control TC 733 touchscreen This set consists of a FREY F-LINE F260 vacuum lobe filler and an automatic FREY KL6 forming module, representing a professional, industrial line designed for continuous portioning and precise shaping of meat slices for the production of Döner Kebab rolls. The core of the filler is a modern, maintenance-free servo drive and a lobe pump system with an efficient vacuum pump (21 m3/h), ensuring optimal de-aeration of the filling, consistent weight, and an ideal cross-sectional structure of the finished product. The FREY KL6 system significantly automates and speeds up the process of arranging meat slices with a constant diameter and thickness, eliminating the need for manual portion selection and reducing labor costs. This set is ideally suited for meat processing plants, companies producing semi-finished products for the HoReCa industry, and specialized kebab manufacturers. The user-friendly FREY TC 733 control panel with a digital interface allows for storing up to 200 recipes and dynamically adjusting operating parameters in real time. Tedpfx Aezvgtgjirsd

Condition: used, mileage: 3,68,099 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, empty load weight: 8,180 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 315/70R22,5, rear tire size: 315/70 R22,5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, navigation system, onboard computer, parking heater, spoiler, truck registration, | Ford F-MAX 500 | Automatic transmission, EURO 6 | Intarder, refrigerator | Leather steering wheel | Auxiliary heater, cruise control | Air conditioning, electric windows, heated electric mirrors | Radio, differential lock | Valid TÜV inspection until | Errors, input errors, and prior sale are subject to change. Todpfszvhzfjx Airsd

Condition: used, Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 24013 Tedpfx Ajv Al Ugjirod Druckleistung / Pressure max. 600Kg Prägefläche / Embossing size max. 100 x 130mm Sehr guter Zustand / Very good condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute; max. packaging size: L(80-700)xW(80-380)xH(5-180) mm; sealing blade length: 530mm; 220V, 6.5kW, 6bar, 0.6m³; machine dimensions: L4755xW1660xH1370 mm. Tjdpsv Nl Hijfx Aired Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), The scope of delivery includes: 1x used upright frame strut Todpfxji Dx Iis Airod Manufacturer: Mecalux Material color: blue Length: approx. 851 mm Center-to-center distance of borehole: approx. 795 mm Borehole diameter: approx. 10.5 mm Cross-section: C 40x25x8 mm Weight: 0.930 kg | each General information about the item: This item is offered for collection only. Any further transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the deep bar: Manufacturer: SSI Schäfer Included in delivery: 01x depth bar, used Material color: grey total length: approx. 1.108 mm f. depth of upright: approx. 1.100 mm clear span: approx. 999 mm crossbeam support: approx. 55 mm profile dim.: CS 190 x 75 x 13 mm material thickness: approx. 2,00 mm weight / pcs.: approx. 8,020 kg Todpfxonl Dmkj Aired Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Manufacturer: Mercedes Type: 1017 F (L F 16 TS) fire engine Year of construction: 1983 Mileage: 96262 km Next HU 2020 Engine type: F 3 L 912, diesel, 124 kW Attachments: Bachert 16 / 8 front-mounted pump Unladen weight: 6750 kg Payload: 5250 kg Length: 7600 mm Width: 2500 mm Tsdpfx Aijt H Rrhorsd Height: 3100 mm Cubic capacity: 5638 cm3 Checkbook-maintained until 2019 with HU

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110 degrees Celsius 60m3/hour 20.2m height n 2900 rpm The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals Tsdouif Iuopfx Airsd

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Tjdpfx Aiowrb U Tjrod

Condition: good (used), The scope of delivery includes: 01x crash barrier, used f. Double rack rows Total length: approx. 2,500 mm Total height: approx. 400 mm Total depth: approx. 305 mm Consisting of each: 02x L collision protection corners, used Material color: orange Todpfx Aevawqbsirjd Total height: approx. 400 mm Total depth: approx. 305 mm Total width: approx. 265 mm Material thickness: approx. 4.00 mm 01x U-rails, used Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Oblong hole: 40 x 15 mm Material thickness: approx. 6.00 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.