Used Moby F for sale (33,865)

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 21-06-12-054, functionality: fully functional, operating hours: 385 h, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Available from April 1, 2027, for self-disassembly and self-collection. Gsdpfx Asz Ah E Rokasug The machine features ProDrive control with a 3.5" color display and a separate keyboard. The height and swivel adjustment of the saw unit are motor-driven. The CNC-controlled parallel fence enables a cutting width of 1,300 mm. Equipment / technical data: • Machine height 910 mm • Control panel at eye level • ProDrive control with 3.5" color display • Main motor 5.5 kW (7.5 hp) VARIO • Stepless speed control, approx. 2,000–6,000 rpm • Saw unit that can be swiveled to one side, 0–46° • Extended cutting height for saw blade diameters up to 500 mm • AKE quick-change system for the main saw blade • 2-axis scoring unit • Motorized height and lateral adjustment of the scoring unit • Scoring unit motor 0.75 kW / 8,200 rpm • LED lighting in the area of the scoring unit • Table extension 840 mm • Double roller carriage 3,800 mm with floor support • On/off switch on the double roller carriage • Angle miter fence, length stop up to 3,500 mm • Two individual folding stops • Extendable cross slide extension, extendable to 650 mm • CNC parallel fence, cutting width 1,300 mm • Travel speed of the parallel fence 250 mm/s • Automatic dimension correction depending on the fence profile • Front support roller, 300 mm wide • DUPLEX 1350 mm double-sided miter fence • Template holder directly on the control panel • 99 storable cutting programs • Operating hour counter • USB interface • 400 V / 50 Hz Special equipment: 3,800-mm double roller carriage, CNC parallel fence 1,300 mm, 2-axis scoring unit, VARIO drive, and the DUPLEX miter fence. Inspection and test run possible by appointment.

Condition: good (used), Year of construction: 2002, machine/vehicle number: P/50078, functionality: fully functional, power: 17 kW (23.11 HP), input voltage: 24 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 20 mm, height adjustment type: electric, actuation type: electric, total height: 1,500 mm, total length: 8,200 mm, total width: 1,000 mm, overall weight: 3,300 kg, Equipment: CE marking, documentation/manual, Here are some additional key specifications for the machine: Edge thickness: 0.3 – 20 mm Panel thickness: up to 60 mm Feed rate: 12 – 20 m/min Due to a change in the production line, this edge banding machine is now available for sale. The machine was used infrequently in recent years but remained in operation until April 2026. All functions are working, but some fine adjustments are required. The machine is disconnected from the power supply and is located in the heated hall. The manual and adjustment tools are included. A generous amount of edge banding material is included in the purchase price (see photo). Gusdpfxozy Nzzo Akaeg A forklift is available for loading. If necessary, a second forklift can be arranged.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Godpfszuwqtjx Akaeug Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,400 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 30 mm, actuation type: hydraulic, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Panel saw ALTENDORF, F45, with scoring unit, tilting and height adjustment of the saw blade electrically controlled up to 45 degrees, sliding table 3000mm. Gusdpfx Akszzy Sasaeg

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, laser power: 2,000 W, Traverse paths: X-axis (mm) 3060 Guodpfx Aszzw Irjkaog Y-axis (mm) 1530 Z-axis (mm) 160 Max. Sheet dimensions (mm) 3048×1524 Control: Sinumerik 840D SL Laser power: 2000W Max. sheet thickness: Steel 12 mm Stainless steel 6 mm Aluminium (AlMg3) 6 mm Copper 3 mm Brass 3 mm With loading and unloading system for the sheets

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Gedpfx Ajzx Dwnokasug Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: like new (used), Year of construction: 2019, Altendorf F45 EvoDrive panel saw in like-new and fully functional condition, manufactured in 2019. Gujdpfx Akozzrwueaeg The saw has only 9 operating hours!!! Saw blade swivel: 0° to 46° Max. saw blade diameter: 450 mm Max. cutting height: 150 mm (vertical) / 103 mm (at 45° tilt) Power (main motor): 5.5 kW Parallel fence: 1,000 mm Angle/cross fence: extendable up to 3,200 mm Dust extraction connections: Ø 80 mm on the guard (top), Ø 120 mm on the port (bottom) Machine weight: approx. 1,200 kg Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 2021, Total length of the jointer tables: 2250 mm Planer width: 520 mm Max. material removal: 8 mm Planer cutter diameter / planer knives: 120 mm / 4 pcs. Godpfjzzx R Uox Akajug TERSA quick-change system for planer knives Speed: 5000 rpm Motor: 5.0 kW Dust extraction port diameter: 120 mm Dimensions: 2250 x 1440 (L x W) Weight: approx. 465 kg Location: Supplier

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Gujdpfx Aszzwbljkasg Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Godpjzx N T Iofx Akajug Manufacturer: GRAULE Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Gjdpfx Aezzwbrskajug (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Y1, Y2, X and R axis CNC Gsdpfxjzz Rz Ss Akaoug Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 980223, overall weight: 1,100 kg, spindle speed (max.): 17,000 rpm, number of spindles: 8, spindle diameter: 16 mm, distance between spindles: 50 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 8 pcs. Spindle diameter: 16 mm Max. spindle speed: 17,000 rpm Distance between spindles: 50 mm Table length: 245 mm Table width: 735 mm Number of workpiece clamps: 2 pcs. Workpiece support/guide: Table MACHINE DETAILS Voltage: 415 V Fuse rating: 16 A Guodpfx Ajzzbdwskaog Power: 7.5 kW Dimensions & Weight Dimensions (L × W × H): 1,700 × 1,100 × 1,150 mm Shipping weight: 1,100 kg Number of shipping packages: 1 pc. EQUIPMENT Drills included CE marking

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Gjdpfx Akezwdqrjaeug Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING body FEDERAL Emulsion / Asphalt Sprayer Guedpfx Aowmpcnskaeg Note: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the cab! • Manual transmission • Differential lock • Long-distance cab • 1 bunk • Leaf/leaf suspension • Tyres: 12 R 22.5 (alternative: 315 / 80 R 22.5) • Tank capacity: 6,000 litres emulsion • Burner NEW! • Spray bar foldable on both sides! Errors and prior sale excepted! = More information = Fuel type: Diesel Mileage: 67,000 km Applicable material: Asphalt Damages: Damaged vehicle (not drivable)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal - Projection laser SL LASER Pro Director 6 Gsdpozz N Uqofx Akaeug - Slotted table/magnetic table

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a fully automatic, professional Furnimate NAT-620-F line (company information provided at the end of the advertisement) for industrial production, designed for joining wood lengthwise using the finger jointing method – straight, mitered, and zigzag joints – with a maximum length of 6.6 m. Output: approximately 1500 linear meters per hour (depending on the cross-section of the material). The length can be automatically divided into 6 parts. Fully functional, in continuous use, and a demonstration of its capabilities is possible on-site at the production facility. High-quality Siemens control electronics. Used sparingly, only a few hours per week. VAT invoice 23%. Net price: PLN 215,000. Manufactured in Taiwan in 2018. In operation since 2019. All parts and sensors are readily available in both the Polish and international markets. Gusdpjzzw R Hjfx Akaog Videos demonstrating the machine in operation can be found on the YouTube channel and the manufacturer's website. Furnimate Wood Working Machinery Co., Ltd. is a Taiwanese manufacturer specializing in advanced finger jointing line systems. Based in Taichung, the company has been providing solutions for the wood industry since the mid-1980s. Key products and offerings: Furnimate produces machines with varying degrees of automation, including: Fully automatic finger jointing lines: Ultra-fast, servo-type systems. Horizontal and inverter systems: Solutions tailored to different production needs. Automatic crosscut saws: Used for precise trimming of materials. Manual machines: Designed for smaller production facilities. Company Information: Location: No. 62, Lane 549, Sec. 2, Sanfeng Rd., Fengyuan Dist., Taichung City, Taiwan. Export: Furnimate is an active exporter, supplying machines to over 50 countries worldwide. If you have any questions, please contact us by phone or email.

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono Godezzv N Iepfx Akajug

Condition: good (used), Year of construction: 2016, Gebruikte fiberlaser van Durma Type: HD F 3015 Vermogen: 2 kW van IPG Tafelafmetingen: 3000 x 1500 mm Guodpfx Akezulvqjaog Complete machine incl. afzuigunit

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Gsdpfxjzhrduo Akaeug Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: good (used), Year of construction: 1995, CNC Wire EDM Machine AGIE AGIECUT 270 SF+F HSS Year of manufacture: 1995 Travel in X-axis: 350 mm Travel in Y-axis: 250 mm Travel in Z-axis: 256 mm Travel in U/V axes: ±70 mm Positioning resolution: 0.0001 mm Positioning accuracy: approx. ±3 µm Machining data Max. taper: 30° at a workpiece height of 100 mm Surface finish: up to approx. Ra 0.2 µm with multiple finishing passes Workpiece data Workpiece size, max. dimensions: 750 × 550 × 250 mm Workpiece weight, max.: 450 kg Wire system Wire diameter: 0.10 – 0.33 mm Wire speed: up to approx. 3 m/min Godpfx Aszzyhnjkajug Wire tension: CNC-controlled MACHINE DETAILS Control system: AGIEVISION / AGIE HSS Generator: AGIE HSS Mains connection: 3 × 400 V, 50 Hz Connected power: approx. 10.5 kVA Dimensions & Weight Dimensions (L × W × H): approx. 2,215 × 2,215 × 2,220 mm Machine weight: approx. 3,600 kg EQUIPMENT Fully automatic wire threading

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor Godpfxszv Ulwj Akaoug - Operating instructions in German * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: good (used), Year of construction: 2003, Equipment: scorer, Altendorf F45 Length of aluminum sliding table: 3,400 mm Saw blade diameter: 315 mm Main saw motor: 4 kW Scoring saw motor: 0.75 kW Saw blade width to the right of the saw: 1,350 mm Saw blade height adjustment: automatic positioning Saw blade tilt: automatic positioning Godpfx Aozzl Dzekaeug

Condition: used, mileage: 31,500 km, power: 100 kW (135.96 HP), first registration: 11/1987, fuel type: diesel, next inspection (TÜV): 06/2026, color: red, gearing type: mechanical, number of seats: 9, total length: 7,000 mm, Year of construction: 1987, Equipment: ABS, parking heater, Mercedes-Benz 7.5-ton service vehicle – in very good condition – only 31,725 km. For sale is a Mercedes-Benz service vehicle under 7.5 tons, first registered in November 1987, with an exceptionally low mileage of only 31,725 km. The vehicle comes from official use and is in very good technical condition. Only minor cosmetic signs of wear are present. The truck is ideally suited for trades, fire department conversions, event/promotional vehicles, food truck conversions, camper van projects, or export. Vehicle data Make/Model: Mercedes-Benz Type: Truck < 7.5 tons – service vehicle First registration: November 13, 1987 Mileage: 31,725 km Engine: 5,917 cm³ diesel Power: 134 hp Drive: Rear-wheel drive Transmission: Manual 5-speed Condition: Only cosmetic damage, technically very good Availability: Immediately Chassis & Axles * 2 axles, 1 driven * Permissible front axle load: 3,500 kg * Permissible rear axle load: 4,800 kg Gjdpfxozbfgde Akasug * Permissible total weight: 7,490 kg * Technical total weight: 7,490 kg Tires – 1st axle: * Tire size: 9.5 R17.5 * Condition driver & passenger side: >70% Dimensions * Overall length: 7,000 mm * Overall width: 2,500 mm * Overall height: 2,900 mm Special features * Extremely low mileage * Robust Mercedes diesel engine from the older series (very durable) * Ideal as a base vehicle for conversions * Immediately ready for use * No known technical defects * German registration documents Conclusion: A rare, excellently preserved Mercedes-Benz 7.5-ton truck with extremely low mileage – perfect for commercial use, conversion projects, or export. Vehicles in this condition and with this history are hardly ever found anymore. * WhatsApp message for interested parties: Just let me know – KARL SCHUSTER

Condition: excellent (used), mileage: 2,80,545 km, power: 309 kW (420.12 HP), first registration: 10/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 8,970 mm, loading space width: 2,530 mm, loading space height: 2,680 mm, Year of construction: 2016, Equipment: ABS, AdBlue, central locking, crane, power mirror, tail-lift, = Additional options and accessories = - Aluminum fuel tank - Lift Axle - Radio/CD player - Sun visor - Tailgate = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10 m Capacity kilo: 5430 kg = More information = General information Number of doors: 2 Cab: single Registration number: EG943GJ Technical information Number of cylinders: 6 Engine capacity: 11.120 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle Weights Empty weight: 15.828 kg Carrying capacity: 10.172 kg GVW: 26.000 kg Functional Tail lift: dhollandia DHLM 30, tail lift, 3000 kg Crane: FASSI F 135, year of manufacture 2016, behind the cab Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Guedez Ah Avjpfx Akaog Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A