Used Monitoring for sale (4,851)

Condition: good (used), Year of construction: 2023, operating hours: 160 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Hsdpfjgl Nlmox Aamsh Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), functionality: fully functional, mileage: 1,25,753 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,100 kg, first registration: 10/2021, next inspection (TÜV): 09/2026, emission class: euro6, color: grey, number of seats: 8, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, 7831 Paint color: Graphite Grey metallic dark MB 7831 BA3 Active Brake Assist BH1 Hold Function CF7 Comfort Suspension CL3 Leather Steering Wheel CL4 Multifunction Steering Wheel with Trip Computer CM2 Bumpers and Attachments Painted in Body Color CN1 Exterior Sill Panels CU4 Aerodynamics Package D12 Roof Railing/Luggage Rack E07 Hill-start Assist E1D Digital Radio (DAB) E57 Trailer Socket Wiring EA4 Audio 40 EL9 2-way Speakers Front and Rear ES2 12V Socket in Luggage Compartment/Cargo Area ET4 Active Distance Assist DISTRONIC EY2 Pre-installation for Live Traffic Information JK3 Instrument Cluster with Pixel Matrix Display JP1 PRE-SAFE® JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters KP7 SCR Emission Control Generation 4 L Left-Hand Drive LA2 Light Assist LC4 Comfort Roof Control Unit LC8 Surround Lighting Tailgate LD9 Rear Compartment Interior Lights LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus LX5 Europe M3E Electric Suction Fan Power Level 5 M60 Alternator 14 V/250 A MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II Hodpfsyc R Shjx Aamoh MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package EZ5 Parking Package EZ8 PARKTRONIC F48 Windscreen Washer System Heater F64 Electrically Folding Exterior Mirrors F68 Heated and Electrically Adjustable Exterior Mirrors F72 Automatic Dimming Exterior and Interior Mirrors FK2 Chrome Radiator Grille FP2 Mirror Package Vito FP4 Chrome Interior Package FR8 Reversing Camera G43 9G-Tronic H00 Warm/Cool Air Duct to Passenger Compartment H12 Additional Hot Water Heater H15 Heated Passenger Seat H16 Heated Driver Seat H20 All-round Heat-Insulating Glass HH9 Semi-automatic Air Conditioning TEMPMATIC HY1 Remote Control for Additional Hot Water Heater HZ0 Electric Auxiliary Heater HZ7 Semi-automatic Air Conditioning, TEMPMATIC in Rear IL5 Left-Hand Drive IL6 Metallic Paint IN2 Wheelbase 3200 mm, Long Overhang JA7 Blind Spot Assist JF1 Rain Sensor JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters LA2 Light Assist LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package RY2 Tire Pressure Monitoring Front and Rear Axle, Wireless SA6 Passenger Airbag SB1 Comfort Driver's Seat SB2 Comfort Passenger Seat SE5 Lumbar Support for Driver's Seat T19 Sliding Door Left US4 3-seater Comfort Bench 1st Row, Outer Seat Foldable US5 3-seater Comfort Bench 2nd Row, Foldable Outer Seat V23 Interior Trim Premium Version VL2 Velour Floor Mats VU9 Black Artico Man-made Leather W16 Fixed Window Front Left in Sidewall/Sliding Door W17 Fixed Window Front Right in Sidewall/Sliding Door W32 Electrically Operated Opening Window Passenger Compartment W65 Tailgate W70 Privacy Glazing in Rear, Tinted Glass W78 Rear Window in Tailgate/Rear Door with Wiper and Washer System Z2S Sport Line Z42 Registration as Passenger Car Z91 Special Model Tourer Edition ZM4 Combi Vehicle ZQ8 Tourer PRO

Year of construction: 2010, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E61SG10042213272+660610910-02608, This combi steamer from the manufacturer Rational is a used SelfCooking Center® with 6 x 1/1 Gastronorm trays in electric version from a highly matured series. Our offer, as shown, includes the UltraVent condensation hood + combi steamer + US III at a package price as offered. This unit is easy to operate, even for unskilled staff. Without the need for constant monitoring or control, you can achieve outstanding food quality. You can prepare different dishes at the same time, and the combi steamer also features automatic cleaning with Care Control®. The combi steamer has undergone extensive overhaul in our in-house workshop and is fully functional. This device is sold as a complete package, including the US III + UltraVent condensation hood. Total tower height: 2125 mm You will receive an invoice with stated VAT. The SelfCooking Center® from RATIONAL is much more than just a professional combi steamer that handles heat and steam. Thanks to four innovative assistants, dishes are prepared faster and more precisely. Cooking becomes an experience and cleaning the appliance is effortless. Technical data – UltraVent condensation hood: • W x D x H: approx. 854 x 1226 x 470 mm • Minimum door opening for transport (W x H): 845 x 1050 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: 660610910-02608 Technical data – combi steamer: • Serial number: E61SG10042213272 • Year of manufacture: 2010 • Trays for: 1/1, 1/2, 2/3, 1/3, 2/8 GN • Capacity: 6 x 1/1 GN • Meals per day: 30-80 • Width: 850 mm • Depth: 780 mm • Height: 810 mm • Minimum door opening for transport (W x H): 845 x 850 mm • Weight: 110 kg • Connection values: 3 NAC 400 V / 10.0 kW / Hz: 50/60 Hjdpfxjyf Eaxe Aamsh Condition: used, overhauled, fully functional Further features: • 100% hygienic fresh steam from the steam generator • Intelligent cooking: the SelfCookingCenter 101 covers 95% of all common cooking applications • Easy to use for everyone, including unskilled staff • SelfCooking Control® – with 9 applications: large roasts, grilled items, poultry, fish, side dishes, potato products, egg dishes/desserts, baking, Finishing® • Cockpit – graphically assisted overview of current cooking chamber climate, forecast cooking progress, review and preview functions, and options at the end of the cooking process • Combi steamer mode with operating modes: steam 30–130 °C, hot air 30–300 °C, combination of steam and hot air 30–300 °C, Finishing® • ClimaPlus Control® – precise humidity measurement, 5-stage adjustment and regulation • Care Control – self-cleaning program • Manual steam injection • Low-temperature and overnight cooking • Delta-T cooking for gentle cooking of large cuts of meat • TFT color display and touchscreen for easy selection • Central control dial with "push" function • Hand shower with automatic retract function • Core temperature probe • Cool-down for quick and safe cooling of the cooking chamber • Halogen cooking chamber lighting • Longitudinal tray insertion suitable for 1/1, 1/2, 1/3, 2/3, and 2/8 GN containers • Interchangeable, easy-to-replace door gasket • Double glazing, pivoting for easy cleaning • Operating and warning indications, for example in case of water shortage Sale is subject exclusively to our general terms and conditions (GTC).

Condition: good (used), functionality: fully functional, mileage: 1,01,207 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, first registration: 04/2023, next inspection (TÜV): 05/2027, emission class: euro6, color: black, number of seats: 9, number of previous owners: 1, Year of construction: 2023, machine/vehicle number: RYA223, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, sliding door, soot filter, BH1 HOLD Function C447 SERIES 447 C70 Pedestrian protection CF7 Comfort suspension CL1 Steering wheel adjustable in tilt and height CL4 Multifunction steering wheel with trip computer CM2 Bumpers and add-on parts painted in body color CU4 Aerodynamics package E07 Hill start assist Hjdpfx Asyc R N Hjamoh E1D DIGITAL RADIO (DAB) E2R Radio generation 2 E34 Buffer battery for starting process EA4 Audio 40 ED4 Fleece battery 12 V 92 Ah EL9 2-way speakers front and rear EW6 Pre-installation Remote Services Plus EY2 Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management EZ8 PARKTRONIC F447 SERIES 447 F61 Interior mirror F66 Lockable glove compartment F68 Exterior mirrors heated and electrically adjustable FKB COMBI VEHICLE FP4 Chrome interior package G43 9G-TRONIC H00 Warm air duct to passenger compartment H20 All-round heat-insulating glass HH9 SEMI-AUTOMATICALLY CONTROLLED AIR CONDITIONING TEMPMATIC HI1 Climate zone 1 (cold/comfort) HX1 Refrigerant R-1234yf HZ0 Electric auxiliary heater HZ7 Rear compartment semi-automatic air conditioning, TEMPMATIC I52 HU Map Data Country Set 3 IB6 Series C447 Vito/V-Class IG5 Basic IK0 Complete vehicle IL1 Domestic - code IL4 Region EU/EFTA IL5 Left-hand drive IL6 Metallic paint IN2 Wheelbase 3200 mm, long overhang J55 Seat belt warning device for passenger seat JA1 Warning light for windshield washer fluid level JH3 Communication module (LTE) for digital services JK3 Instrument cluster with pixel-matrix display JW8 ATTENTION ASSIST JX2 Maintenance interval 40,000 km KB5 Main tank 70 liters KP7 Emission control SCR Generation 4 L LEFT-HAND DRIVE LA2 Headlight assistant LD9 Interior lighting in rear compartment LE1 Adaptive brake light LX5 Europe M40 Generator 14 V/200 A M72 Vehicle suitable for HVO MG9 Generator management MJ8 ECO Start/Stop function MK8 Speed limit 210 km/h O6 Emission class Euro 6d M/N1 GR. II MS1 CRUISE CONTROL MU2 OM 654 DE 20 LA 100 kW (136 hp) 3800/min MX0 BlueEFFICIENCY package Q00 Trailer load 0 kg/lbs R21 Wheel size group 1 RF9 Tire brand Goodyear (90) RG7 Tires 225/55 R17 RK8 Light-alloy wheels 7 J x 17, 20-spoke design RM0 All-season tires RX7 Wheel brand Borbet RY2 Tire pressure monitoring front and rear, wireless S00 Airbag control unit Generation AB12 S02 Driver's seat S23 Dual passenger seat SA6 Passenger airbag SH1 Thorax-pelvis sidebag driver SH9 Windowbags for driver and passenger T14 Active catch for sliding door T70 Child safety lock on doors in passenger compartment T74 Grab handle for entry T75 Grab handles for entry driver and passenger U63 Passenger compartment seating 3-seat bench 2nd row U71 3-seat bench 1st row with folding outer seat UR3 Rear seat quick-release fittings 2 seat rows V23 Premium interior trim V36 Roof lining V41 TPO plastic floor in passenger compartment VF4 Fabric Caluma black VH1 Grab handle in rear compartment VV9 Anchor points in roof frame W16 Fixed window front left, in side wall/sliding door W17 Fixed window front right, in side wall/sliding door W29 Fixed rear window W50 Double rear door 180 degrees without window W70 Tinted windows in passenger compartment, privacy glass W78 Rear hatch window with wiper and washer system XA5 Weight variant 3,200 kg XC9 COC papers XM0 Facelift Z42 Registration as passenger car ZM4 Combi vehicle ZQ8 Tourer PRO

Condition: good (used), functionality: fully functional, mileage: 1,25,753 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,100 kg, first registration: 10/2021, next inspection (TÜV): 09/2026, emission class: euro6, color: grey, number of seats: 8, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, 7831 Paint color: Graphite Grey metallic dark MB 7831 BA3 Active Brake Assist BH1 Hold Function CF7 Comfort Suspension CL3 Leather Steering Wheel CL4 Multifunction Steering Wheel with Trip Computer CM2 Bumpers and Attachments Painted in Body Color CN1 Exterior Sill Panels CU4 Aerodynamics Package D12 Roof Railing/Luggage Rack E07 Hill-start Assist E1D Digital Radio (DAB) E57 Trailer Socket Wiring EA4 Audio 40 EL9 2-way Speakers Front and Rear ES2 12V Socket in Luggage Compartment/Cargo Area ET4 Active Distance Assist DISTRONIC EY2 Pre-installation for Live Traffic Information JK3 Instrument Cluster with Pixel Matrix Display JP1 PRE-SAFE® JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters KP7 SCR Emission Control Generation 4 L Left-Hand Drive LA2 Light Assist LC4 Comfort Roof Control Unit LC8 Surround Lighting Tailgate LD9 Rear Compartment Interior Lights LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus LX5 Europe M3E Electric Suction Fan Power Level 5 M60 Alternator 14 V/250 A MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package EZ5 Parking Package EZ8 PARKTRONIC F48 Windscreen Washer System Heater F64 Electrically Folding Exterior Mirrors F68 Heated and Electrically Adjustable Exterior Mirrors F72 Automatic Dimming Exterior and Interior Mirrors FK2 Chrome Radiator Grille FP2 Mirror Package Vito Hsdpeyc R Ntofx Aamoh FP4 Chrome Interior Package FR8 Reversing Camera G43 9G-Tronic H00 Warm/Cool Air Duct to Passenger Compartment H12 Additional Hot Water Heater H15 Heated Passenger Seat H16 Heated Driver Seat H20 All-round Heat-Insulating Glass HH9 Semi-automatic Air Conditioning TEMPMATIC HY1 Remote Control for Additional Hot Water Heater HZ0 Electric Auxiliary Heater HZ7 Semi-automatic Air Conditioning, TEMPMATIC in Rear IL5 Left-Hand Drive IL6 Metallic Paint IN2 Wheelbase 3200 mm, Long Overhang JA7 Blind Spot Assist JF1 Rain Sensor JP4 Lane Package JW5 Lane Keeping Assist JW8 Attention Assist JX2 Service Interval 40,000 km KB5 Main Fuel Tank 70 Liters LA2 Light Assist LE1 Adaptive Brake Light LG2 LED Intelligent Light System LG4 Rear, Brake, and Indicator Lights in LED Technology LG8 High Beam Assist Plus MG9 Generator Management MJ8 ECO Start-Stop Function MO6 Emission Standard Euro 6D M/N1 Gr. II MU6 Engine OM654 DE 20 LA 140 kW (190 hp) MX0 BlueEFFICIENCY Package RY2 Tire Pressure Monitoring Front and Rear Axle, Wireless SA6 Passenger Airbag SB1 Comfort Driver's Seat SB2 Comfort Passenger Seat SE5 Lumbar Support for Driver's Seat T19 Sliding Door Left US4 3-seater Comfort Bench 1st Row, Outer Seat Foldable US5 3-seater Comfort Bench 2nd Row, Foldable Outer Seat V23 Interior Trim Premium Version VL2 Velour Floor Mats VU9 Black Artico Man-made Leather W16 Fixed Window Front Left in Sidewall/Sliding Door W17 Fixed Window Front Right in Sidewall/Sliding Door W32 Electrically Operated Opening Window Passenger Compartment W65 Tailgate W70 Privacy Glazing in Rear, Tinted Glass W78 Rear Window in Tailgate/Rear Door with Wiper and Washer System Z2S Sport Line Z42 Registration as Passenger Car Z91 Special Model Tourer Edition ZM4 Combi Vehicle ZQ8 Tourer PRO

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, working width: 1,030 mm, stroke length: 200 mm, overall weight: 4,000 kg, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40 Year of Manufacture: 2017 Technical Specifications Manufacturer: BYSTRONIC Operating hours: approx. 9,500 h Model: Xpert 40 Year: 2017 Press capacity: 40 t Bending length: 1,030 mm Stroke: 200 mm Distance between frames: 1,060 mm Motor power: 7.5 kW Weight: 4 t Dimensions: L 1.52 x W 1.60 x H 2.45 m Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A tool holder, top • Height-adjustable ByVision Bending display with 22-inch Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver Hjdpfx Aaoyficdemoh • OPC Interface Bending • Bend curve generator • Automatic tooling overload protection • Oil cooler • Ergo foot switch • Rear sliding door with electrical monitoring All details without obligation. A powered demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, total height: 2,933 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, tool weight: 8,000 g, product length (max.): 2,570 mm, number of axes: 5, This 5-axis Mazak CV5-500 vertical machining center was manufactured in 2023. It features a maximum spindle speed of 12,000 rpm, a dual-stage electric gear, and a rapid traverse rate of 36 m/min in X, Y, and Z axes. The machine supports a table load of 200 kg and includes a 30-position automatic tool changer. Ideal for complex, multi-axis precision machining. Contact us for more information about this machine. • Electrical load • Apparent power (40% duty): 45.5 kVA • Permanent apparent power: 43.4 kVA • Electrical connection: 3-phase AC 380/400/415/440/460/480 V ±10%; 50/60 Hz ±1 Hz • Pneumatics • Pressure: 5–9 bar • Flow rate: 26 l/min • Air blow-off through spindle: 345 l/min • Spindle • Spindle nose: Steep taper 40° • Gear stages: 2-stage (electric) • Rated power (AC inverter motor): 18.5 kW (10% duty), 15.0 kW (25%), 11.0 kW (40% and continuous) • Max torque: 119.4 Nm (10%), 95.5 Nm (25%), 70.0 Nm (40%); continuous 57.3 Nm • Axes, feeds, rapids • Number of simultaneously operating axes: 5 • Rapid traverse X/Y/Z: 36 m/min • Rapid traverse B/C: 30 min⁻¹ • Feed rates X/Y/Z: 36,000 mm/min • Table • Diameter: 500 mm • Tapped holes: M16 × 2 • Reference bore: Ø50 mm H6 (+0.016 / −0.000 mm) • Workpiece capacity Hodpfx Aasyf H Tyomsh • Max diameter: 500 mm • Max height: 320 mm • Travels / Working area • B-axis swivel/indexing: 220° (±110°), 0.0001° • C-axis swivel: 360° • Distance spindle nose – table top (horizontal): 50–520 mm • Distance spindle nose – table center (vertical): 95–565 mm • Automatic tool changer • Tool positions: 30 (optional magazine: 48) • Selection: Random, shortest path • Tool holder: MAS BT 40 or SK 40 • Pull bolt: Yamagaxi ANSI type • Max tool diameter: 80 mm (adjacent occupied) / 125 mm (adjacent free) • Max tool length: 300 mm • Tool change time (chip-to-chip): 4.60 s • Tank capacities • Guideway/ballscrew lube: 1.80 l • Hydraulic oil: 5.0 l • Spindle coolant: 26.0 l • Option: 18,000 min⁻¹ spindle coolant (oil tank): 60 l • Total tank capacity: 320.0 l Additional equipment • Monitoring/sensing package • Analog inputs: 4 × 0–10 V • Digital inputs: 8 • ACC-SENSOR.1AXIS.10M: 1‑axis accelerometer with 10 m cable • Active power sensor (Dimensions: 8105 × H85 mm) • Toolscope IP for DIN rail Rev.4 • Industrial PC functionality in the control cabinet • Communication and control via HMI • PM: Tool and process monitoring • Tool breakage detection • Self-learning wear limit • Fixed and dynamic tolerance bands • Process performance monitoring strategy • Collision monitoring with all Goliog • DIN rail mounting in the control cabinet • Dimensions: 812 × H90 × D62 mm • Documentation including Toolscope • Chip conveyor (dimension reference provided: machine width 3,365 mm including chip conveyor)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm Hedpfx Asyf H Nnjameh • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: used, mileage: 32 km, power: 171 kW (232.50 HP), fuel type: hybrid, gearing type: automatic, overall weight: 3,300 kg, first registration: 01/2026, color: grey, number of seats: 8, total length: 5,450 mm, total width: 2,275 mm, total height: 2,004 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 41951 Hjdpfx Ajyc Iwhsamjh Subject to errors and prior sale! ---- SPECIAL EQUIPMENT * Electrically swiveling tow bar * Exclusive Package: Panoramic roof – Rear Seat Package 21 (6 rear seats, sliding doors on both right and left, 2nd row with 3 individual seats, outer seats heated, center seat with folding table on backrest, 3rd row with individual seats) – 15 B&O speakers – Ambient lighting * Heated steering wheel * Adaptive Matrix LED headlights – LED low beam incl. all-weather light – Glare-free LED high beam – LED daytime running lights with integrated front LED indicators – Static LED cornering light – Speed-dependent headlight range adjustment – LED rear lights * Wheels: 7.5 J x 19 alloy wheels in Active Design, Absolute Black * Technology Package 6: Exterior mirrors electrically adjustable, heated, and folding – Audio system with 13-inch multifunction display, Ford SYNC 4 incl. navigation – Blind Spot Assist incl. CTA reverse emergency braking – Pre-Collision Assist, camera and radar based – Drowsiness alert – Lane keeping, lane departure, lane change assist, lane pilot – Traffic sign recognition – Wrong-way alert – Front/rear Park Pilot system – Adaptive cruise control with Stop&Go function – Intelligent speed limiter with speed limit display – 360-degree camera – Sensico leather-look steering wheel ADDITIONAL EQUIPMENT * 2 grab handles on driver and passenger side * 3 USB ports for the 2nd row * ABS * Passenger airbag – with deactivation function * Driver airbag * Battery: H7 AGM single battery * Roof rails, silver * Thatcham-approved anti-theft alarm system – with interior monitoring in the driver's cabin incl. central locking with double locking * Front electric windows with quick up/down function * Electronic parking brake * Ford Key Free System – with Ford Power Start function * FordPass Connect – WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Lockable glove compartment lid * Interior lighting in passenger compartment * 3-zone automatic climate control – with automatic temperature control for driver, passenger, and rear, individually adjustable – auxiliary heater – R-1234yf refrigerant – electric booster heater – electric temperature control in the rear * 1-phase charging cable, length: 5m * Inductive charging station in the center console for mobile devices – Qi standard * Large center console * Emergency call assistant eCall system * Picnic light * Tire repair kit * Tire pressure monitoring system * Windshield wipers with rain sensor * Sliding door with power close assist * Sliding doors right and left incl. sun blinds in 2nd row * Rail-based flexible seating system * Fixed side windows, second and third row * Seat Package 29: Passenger seat individual, manually adjustable in 4 ways – Driver seat electrically adjustable in 5 ways – Heated seats for driver and passenger – Armrest inside and outside – Electric lumbar support for driver – Lumbar support for passenger – Passenger side airbag – Side airbags for right and left, head-shoulder airbags front, right and left – Partial artificial leather in fabric, upholstery in artificial leather/velour * 12V socket in passenger compartment * Carpet throughout the vehicle * Front USB port * 4 lashing points * Immobilizer * Heat-insulating glazing, medium tint * Central locking with remote control, additionally with second key

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm Hjdpfx Ajyf Htyeamjh • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: new, Year of construction: 2026, operating hours: 8 h, Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant Hjdpfjxfwdsx Aameh . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Gullotine Wohlenberg WP 115 MCS-2 TV with Light guard and air bed. Schneidmaschine / Gullotine Wohlenberg WP 115 MCS-2 TV Baujahr / Year 1994 - Serial-No. 3563-009 Schnittbreite / Cutting width max. 1150mm Monitor - Programm Lufttisch / Air bed Lichtschranke / Light guard Hjdpfx Aasyc Ul Esmjh Seitentische / Side tables Ersatzmesser / Spare Knife Mit Handbücher / Manuls include Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, maximum load weight: 48,800 kg, lifting height: 18,000 mm, Year of construction: 2012, Fuchs Terex RHL860D – Electric Material Handling / Loading Equipment We offer this excellent-condition, ready-to-work Fuchs Terex unit. Manufacturer: Fuchs Terex Model: RHL860D Year of Manufacture: 2012 Condition: Very good This machine is fully electric driven, offering significant operational and environmental advantages: Key Advantages of Electric Drive: Zero CO₂ emissions Low noise levels with high-torque electric motors Minimal heat generation Future-proof drive technology Low maintenance and operating costs Comprehensive monitoring of power supply quality and machine grounding Designed for 24/7 operation Large working radius, expandable with optional cable drums or power packs Hedpfx Aaoyf Nnyomjh An ideal solution for efficient, sustainable, and continuous material handling operations. Shipping assistance available from the Port of HaminaKotka, Finland. An electric excavator is well suited for this type of application, where the need for relocation is minimal. When necessary, the machine can be driven to the maintenance hall using a dedicated power cable. Compared to an internal combustion engine, the electric motor is largely maintenance-free. Another major advantage of electric power is that fuel does not gel even in severe cold conditions. During cold periods, the hydraulic system is kept continuously running, ensuring that the hydraulic oils remain warm. The Terex Fuchs contains 700 liters of hydraulic oil, and oil change intervals are determined through oil sample analysis. A significant reduction in operating costs is achieved through electric operation, which is considerably cheaper than diesel. The power supply comes from the factory network at 690 volts, which is stepped down on the machine to the Terex Fuchs operating voltage of 400 volts. The electric motor driving the hydraulics has an output of 160 kW. The pump delivers nearly 500 liters per minute at a pressure of 360 bar. Power to the pump is supplied according to the oil demand of the hydraulic consumers, which reduces overall power requirements.

Condition: used, mileage: 63 km, power: 100 kW (135.96 HP), first registration: 04/2024, fuel type: diesel, overall weight: 3,025 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal Number: 56467 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT - Airbag (passenger side) - Towbar preparation kit – Electrical preparation set for towbar – wiring harness, 13-pin socket and trailer module for retrofitting a towbar - Exterior mirrors, electrically adjustable, heated and folding – with integrated indicators - Rear window, fixed and heated – interior mirror – partition wall with window - Rear window wiper including washer nozzle and automatic activation when reverse gear is engaged - Cargo area lighting (LED) – extra bright - Package: Cargo Area Protection Package – High sidewall paneling – cargo compartment lighting (LED), extra bright - Seats: Seat Package 11A – Driver's seat, 4-way manually adjustable – Double passenger seat with load-through flap, fixed – lumbar support for driver – Plus Style fabric upholstery, seat center section in Black Onyx, remainder in Ebony - Socket: 12-volt outlet in the cargo area (D-pillar) - Partition wall (metal) with window ADDITIONAL EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed gearbox - ABS electronically controlled with EBD - Driver’s airbag - Electrically adjustable exterior mirrors - Exterior mirror housings made of black plastic - Battery: H7 AGM single battery - On-board computer - Roof, flat - Roof console - Twin rear doors/180° (without window) - Rev counter - Third brake light - Electronic safety and stability system - Front electric window lifters - Electronic handbrake - FordPass Connect - Heated windscreen - Floor mats: rubber mats in front - Grab handles, driver and passenger side - Lockable glove compartment with lid - Front interior lighting - Automatic climate control, front - Headrests (3) - Fuel tank 55 l - Paint: solid color - Cargo area lighting (LED) - Steering wheel: plastic steering wheel - Small center console - Emergency call assistant - Package: Technology Package 2 (Trend) – Ford audio system with 13'' multifunction display and Ford SYNC 4 – Pre-Collision Assist, camera based – Driver fatigue alert – Traffic sign recognition system – Wrong-way driving warning – Lane keeping system incl. lane keeping assist – Park pilot system front and rear – Cruise control – Intelligent speed limiter with speed limit display – Rear view camera - Particulate filter: diesel particulate filter - Radio: Ford audio system with 13'' multi-function display - Radio accessories: 4 speakers - Wheel trims - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 with 215/65 R16 R - Windscreen wipers with rain sensor - Headlights with LED low beam - Sliding door: sliding door on the right - Rear mud flaps - Front mud flaps - Power steering - Seatbelts - Start-stop system - Ford Power start function - Bumpers front and rear partially painted in body color - Partition wall (metal) without window - Door handles made of black-grey plastic - Door hinges, 90 degrees - Recirculation heater - 6 lashing eyes - Immobilizer - Heat-insulating, lightly tinted glazing Hedpfsqmcg Hsx Aamjh - Central locking with remote control ...and much more. ---- First owner. German specification. Errors and prior sale excepted. 2 years manufacturer’s warranty from initial registration (can be extended upon request). We are happy to take your vehicle in part exchange. Financing/leasing possible with no down payment! Still have questions? We are happy to advise you! Because, despite ongoing checks, deviations of the vehicle from the above description cannot be ruled out, we w

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details measuring range X-axis 400 mm measuring range Y-axis 400 mm diameter max. 350 mm weight of the machine ca. 420 kg dimensions of the machine ca. 1,23 x 0,75 x 1,91 m Additional information Used Tool Presetter in very good condition. Checked by a service engineer from SPERONI. Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22" Hodpoyf A Tvofx Aameh Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) Optionally, the following adapter can be obtained from the manufacturer: ISO 40 holder HSK 63 A/C holder

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Travel distances X-axis travel: 400 mm Hodpfoydnncex Aamjh Y-axis travel: 400 mm Z-axis travel: 375 mm Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications!

Condition: used, Year of construction: 2023, machine/vehicle number: 0102-260003, The HBE321A Dynamic automatic band saw from BEHRINGER is a precise metal band saw for industry and the steel trade. It offers low cutting deviations, vibration damping thanks to cast iron band guides and a servo feed system for precise saw feeds. The linear guide system ensures stability and precise cuts. The auto-feed control automatically adjusts the feed and cutting speed. An electrically driven chip brush and sensitive cutting pressure control increase the cutting performance. The automatic guide arm minimizes the adjustment effort. Modern drives reduce energy consumption by approx. 30%. A touch control enables simple operation and the double vice ensures process reliability. HBE321A Dynamic high-performance band sawing machine Technical specifications: Hodpfx Ajyc R Rqeamjh Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat (W x H) 10 x 8 mm Band saw blade drive: Drive power 2.6 kW frequency-controlled Cutting speed 15 - 110 m/min (49 - 361 ft/min) Total drive power: approx. 7.6 kW (machine only without additional equipment) Voltage 400 V ± 10 %, 50 Hz with neutral conductor, control and valve voltage 24 V-DC Material feed length: 640 mm per stroke, maximum 5,760 mm Minimum cut-off length in automatic operation from 10 mm Minimum remaining piece length in automatic operation from 70 mm, in manual operation from 10 mm Saw feed: Regulated servo feed via ball screw spindle Material feed with ball screw Hydraulic material clamping Hydraulic saw blade tensioning, electrically monitored Saw band cleaning with electrically driven chip brush with quick-change device, driven synchronously to the main drive. Coolant device with delivery rate 40 l/min at 2 m delivery height Coolant tank capacity approx. 70 l Length of the machine 1,850 mm, width of the machine 2,300 mm Height of the machine 2,400 mm with the hood open on the feed side, approx. 1,880 mm transport height Material support height 800 mm Base machine paint finish: light gray - RAL 7035, cover paint finish red-violet - RAL 4002 Cutting range 90° round 320 mm Cutting area 90° square 320 x 320 mm Cutting area 90° flat 350 x 320 mm Feed length single stroke 650 mm Drive power 2.6 kW Cutting speed 15 - 110 m/min Saw blade dimensions 4,440 x 34 x 1.1 mm Machine weight 1,900 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 2000 kVA high voltage diesel uninterruptible power supply (UPS) system with two output buses for sale Technical data: 2000 kVA, 10 kV, 50 Hz, power factor 0.8, 1500 rpm The system consists of: • Power generation module (PGM) - diesel engine with optimized emissions, induction coil, synchronous generator; • Starter; • Battery (Pb); • Redundant start panel RSP; Hjdpfsyfprfox Aamjh • Diesel generator automatic oil lubrication equipment; • Unit control panel UCP with touch screen and diesel reduction start module; • Auxiliary control panel ACP for radiator and fuel tank control; • High voltage unit reactor panel URP, 10 kV; • Generator transformer panel GTP 660V /400V; • Block transformer panel UTP 10 kV/660V; • Bypass control panel BCP and auxiliary panels DCP and ADC, BCP capable of controlling six (6) parallel operating systems with programmable logic controller PLC. DCP for powering auxiliary medium voltage DC circuits, ADC for alternating current supply to UPS control panels 400V, 320A block. Interfaces of high voltage switchgear with diesel UPS control panel via Modbus and I/0 modules. • Monitoring - standard monitoring system for graphical and digital display of current and stored data, alarms; • Main input power cabinet (MPB), which consists of an input input main cabinet and an output main cabinet: • Input main power cabinet (IMPB) - metal enclosure. for medium voltage distribution, 10 kV, 16 kA - 1 sec., 50 Hz. The circuit breakers are fixed. Must be able to connect six systems operating in parallel: 2 x input circuit breakers Q7A and Q7B, l x UPS system circuit breaker 1Ql, 1 x bypass disconnection panel Q3A and a measurement panel. Must be able to transmit data to the UPS system via Modbus interface; • Output main power cabinet (OMPB) - metal closed, for medium voltage distribution, 10 kV, 16 kA - 1 sec. 50 Hz. The circuit breakers are fixed. Must be able to connect six systems operating in parallel: lx bypass circuit breaker panel 1Q3A. 1xUPS output circuit breaker 1Q2A, 1 x UPS output circuit breaker Q4A, l x UPS output disconnection Q4Ad. 2 measuring panels, 1 x output switch Q80A. Modbus interface with UPS system control panel; • Exhaust system with muffler, exhaust manifold, two flexible connections for diesel exhaust outlets; • Cooler with horizontal radiator cooler (directional blade fan) for diesel cooling with six flexible bellows for connecting drying pipes.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 110 mm, For sale is a slightly used (2023) German-made CNC machine with an automatic tool changer (ATC) - CNC Step High-Z S-1400T. Working area 1400 x 800 x 110 mm (X/Y/Z). With a tool changer 1150 x 800 x 110 mm (X/Y/Z). Spindle Spinogy X22-L-SK20 with XControl E and XControl P. In addition, I provide all the equipment that allows you to work immediately: a Dell computer and monitor, software, a vacuum pump MARPA MV-0040N, a chip extractor, 7x tool holders, a stack of tools, and other equipment. Hodpfxeyfwakj Aameh I can provide training. The machine is located in Sigulda, Latvia. It is currently connected and can be tested. Additional information on request.

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Hodpfxjyb Rpdj Aameh The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm Hsdpfx Aaoyffgremoh • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: good (used), mileage: 5,01,202 km, first registration: 05/2019, fuel type: diesel, tire size: 355/50R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,530 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, traction control, = Further Options and Accessories = - Second diesel tank - Digital tachograph - Trip recorder (monitoring device) - Fixed fifth wheel - Sleeper cab - Additional braking system = Notes = Number of axles: 2, Configuration: 4x2, Total tank capacity: 960 liters, Second diesel tank, Fifth wheel height: 99 cm, Fifth wheel: Fixed, Number of diff locks: 1, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Trip recorder (monitoring device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Fuel: Diesel, Euro: 6, Transmission type: Automatic, Transmission brand: Scania, Gears: 14, Additional braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Transmission Transmission: SCA, 14-speed, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 355/50R22.5; Steered; Tire tread left: 10 mm; Tire tread right: 7 mm Axle 2: Tire size: 295/60R22.5; Twin tires; Tire tread left inside: 3 mm; Tire tread left outside: 4 mm; Tire tread right inside: 2 mm; Tire tread right outside: 3 mm Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 4 Financial Information Leasing rate: €296 per month (default, 60 months); Please ask for further information and terms Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, years, and price ranges. Why buy from Kleyn Trucks? Simply: • Large, fast-rotating inventory • Recognizable quality • Competitive prices • Reliable business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of 'recognizable quality' • And much more… Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Hsdpfx Asyf T S Noamjh Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations Hedpfxoww E Nrj Aamjh

Condition: as good as new (ex-display), The Convotherm C4ET6.10ES combi oven offers three primary operating modes: hot air, steam, and combi steam. The appliance is equipped with low temperature and Delta-T settings, making it ideal for long cooking times for various foods such as meat, poultry, and fish. These settings allow the operator to cook food overnight. During prolonged, slow cooking, food retains more moisture and remains exceptionally tender. The Delta-T function uses a core temperature sensor to continuously monitor the food’s internal temperature and automatically adjusts heat for even results. The easyTouch control panel features an intuitive 9-inch full touchscreen interface. The Convotherm C4ET6.10ES combi oven is equipped with a ring indicator showing operating status in three stages: 'preheating', 'in progress', and 'ready'. This model includes an integrated on-screen help function, complete with tutorial videos to facilitate usage. The control panel features a permanent antibacterial surface to minimize bacterial transfer. Operators can program up to 399 recipes, each with up to 20 steps, ensuring consistent product output. The unit also features a self-cleaning/wash function with detergent dispensers. Comes with an additional smoker kit and function, a side-sliding door, dedicated extraction hood, and a stand. Factory warranty included; offered significantly below standard price. Electric powered Injection spritzer steam generator 3 primary operating modes: hot air, steam, and combi steam Retherm setting for optimum reheating of cooked foods Low temperature and Delta-T settings enable high-quality results through slow cooking EcoCooking setting conserves energy over extended cook times Hedpfxexwdaye Aamjh Cooking chamber accommodates 7 shelves for pans, baskets, racks, and plates Preheating and cooling functions available Core temperature probe for accurate monitoring 5-speed user-adjustable fan for uniform heat distribution Eco, express, and standard cycles with automatic cleaning system Antibacterial door handle and control panel help reduce bacterial transfer Safety latch protects users from steam during operation in steam mode 208-240 V / 60 Hz / 3 phase / 25.0–28.5 A / 9–11.8 kW Overall Dimensions: 34.5 in W x 31.25 in D x 30 in H

Condition: ready for operation (used), Year of construction: 2018, operating hours: 12,971 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine. • Swivel range (B): -120° to +120° • Rotary table (C): 360° continuous • Tool changer: 96 positions, HSK-A63, rear-mounted with display • Measuring systems: Heidenhain linear scales (X/Y/Z) with purge air; Heidenhain rotary measuring system • POS kinematic module incl. reference ball • POS contour protection • Control cabinet cooling: active air-to-air • Spindle cooler: controlled • Oil cooling for 4th/5th axes: controlled • Network and USB connections • Automatically controlled crane loading hatch • Coolant pump at the head via M-functions • Tool change safety door • Table media interfaces: 3 hydraulic connections and 1 air connection in the table center • Mobile electronic handwheel • Operating hours: 22,996 total; 12,971 program runtime Hedpfx Aasydpp Uemoh Additional equipment • External chip agitator / swarf (chip) conveyor • Chip removal device with dedicated pump • Water gun (washdown) • Air at the spindle • Electromechanical oil/coolant separator • Automatic coolant level monitoring • Operating status indicator light (stack light) • Hydraulic power unit, incl. control via M-function Technical Specification Taper Size HSK 63