Used Motor Scarifier for sale (24,483)

Condition: ready for operation (used), Tool changer for Brother TC-225 machine with 5GN9K / 5RK40GN-CT motor - 1300/1550 rpm / 40W / 200V / 50/60Hz, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ijdpfx Aioz Ddubeyebb

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Ibsdpfx Aszq Atleiyob Nameplate present AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.

Year of construction: 1996, condition: used, Hydraulic motor Year of manufacture: 1996 Ijdpfxey Dvrws Aiysbb

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 Isdpjz Agzqsfx Aiysbb MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Ibodpfszzlhasx Aiyob Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine MODEL M3035 , year 2024 machine as new with warranty included Planetary dual pre-pinch plate prebend SPECIAL FRAME WITH TOP ROLL REDUCED SIZE 300 MM TO ACHIEVE SMALLER BENDING DIA 330 MM Performance Capacity: Plate width 3000 mm plate thickness rolling 22mm pre-bend 20 mm Iodpfx Aoy Tbf Ieiyjbb minimum rolling diameter ID 330 mm usefull surface width on the rollers 3100 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine to agree on request nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Isdpfx Aijwq Shboysbb Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Ibjdpfoz Agzdsx Aiyeb Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: used, functionality: fully functional, USED MECHANICAL POWERED 3-ROLL CALENDER, UPPER ROLL OF 95mm, HYLLUS, 2000x1.5MM. Isdpfx Aezh Dmbjiyjbb

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 11 kW (14.96 HP), Fully functional electric motor. Ibodpfx Aiezk Utkeyeb Previously installed in a surface grinding machine. The shaft runs true (see photo).

Condition: ready for operation (used), Swivel bending machine / Motorized FASTI Type 212-3 - Max. bending capacity: 1520 x 4.5 mm - Max. bending angle: 135 - 140 degrees - Foot switch - Emergency stop - Backstop - Control cabinet Ibsdpez Akw Asfx Aiysb Dimensions (L x W x H): 2.5 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, mileage: 8,38,952 km, power: 324 kW (440.52 HP), first registration: 05/2007, fuel type: diesel, number of seats: 63, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro4, color: black, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater,

Condition: new, power: 302 kW (410.61 HP), fuel type: diesel, number of seats: 51, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, parking heater, soot filter, New vehicle with first registration from 2025 onwards. Ibsdpfx Asy Rw Akjiyob

Condition: used, Year of construction: 2018, functionality: fully functional, power: 500 kW (679.81 HP), nominal power: 500 kW (679.81 HP), rotational speed (min.): 1,490 rpm, input voltage: 500 V, input frequency: 50 Hz, input current: 692 A, type of input current: three-phase, overall weight: 2,500 kg, type of cooling: air, protection type (IP code): IP55, ABB AC Motor Construction: IM1001-B3 Standard: IEC60034-1 Temperature Class: F Isdpfozt Sc Iox Aiysbb IP Rating: IP55 Service Class: S1 Power Factor: 0.86 Frequency: 50 Hz

Condition: used, Year of construction: 2003, operating hours: 34,900 h, functionality: fully functional, machine/vehicle number: 112253, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm Iodjz Akqvspfx Aiyobb - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg

Condition: used, functionality: fully functional, For sale are several spindle motors and servo motors from the manufacturers Mitsubishi, Siemens, and Mazak. The technical condition of the motors has been checked, and they are ready for immediate use. MITSUBISHI: Iodpfoxwi Ucex Aiysbb • Mitsubishi Spindle Motor SJ-4-VKS15-13ZM (2004) • Mitsubishi Spindle Motor SJ-4-KS15-U62M (2000) • Mitsubishi Servo Motor HC-H153S-A47 (2004) • Mitsubishi Servo Motor HC-SF52K-S1 (2x available) • Mitsubishi Servo Motor HC-SF52BK-S2 • Mitsubishi Servo Motor HC-H203BS (2004) • Mitsubishi Servo Motor HC153S-SZ (2x available) SIEMENS: • 3 Permanent Magnet Motors 1FT5064-0AF71-2-Z(F) (2x available) • 3 Permanent Magnet Motors 1FT5074-0AK71-2(F) The spindle motors are sold on an exchange basis. This means you receive a refurbished, tested spindle motor from us, while we receive your defective unit in return. As a result, your production can continue without major downtime and unplanned outages are minimized. Alternatively, you can commission a repair only. We take care of the entire process: we disassemble the spindle motor, repair or refurbish it in our workshop, and reinstall it afterwards. So you have a single point of contact for the entire process – from disassembly to commissioning, everything from one source! INFORMATION: We have a wide range of drive and servo motors for CNC machines and other machinery in stock, and we also offer repair services for them. Please send us your inquiry – we will promptly check availability for your machine. If you have any further questions, please feel free to contact us at any time. Our service promise: For us, quality, expertise, and customer satisfaction come first. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you even after your purchase. With us, you are in the best hands – professional, reliable, and with a passion for machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability assumed.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Ijdpfx Asztpixjiyjbb Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: used, mileage: 2,87,000 km, first registration: 10/2018, fuel type: diesel, number of seats: 36, gearing type: automatic, emission class: euro6, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, * Our internal number: 1171 Ibedpeyhuczsfx Aiyeb * S 511 HD * NEWLY PAINTED * PICK-UP PRICE - Price for collection * Well-maintained vehicle * CLUB BUS with tables * Low mileage (inspection report available) * 290 kW / EURO 6 * Automatic transmission * Retarder * Air conditioning * Auxiliary heater * Large roof hatches * 36 seats * Armrests between the seats * USB sockets * Footrests * Folding tables * Navigation system * Central aisle camera * SUITABLE FOR REGULAR ROUTES with standing room * Trunk lid – lifting mechanism * Ski carrier/roof box preparation at the rear * Front camera – installed * Fire alarm system / extinguishing system installed * Minor dents on the vehicle. * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary * All information is subject to change without notice * We reserve the right to sell the vehicle in the meantime * We refer to our general terms and conditions.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 347 kg, torque: 8,000 Nm, SEW Eurodrive KH107/T DRN132S4/BE11HR/ASE1/TF Manufacturer: SEW Eurodrive Type: KH107/T DRN132S4/BE11HR/ASE1/TF Serial Number: 01.8125801502.0001.22 Technical Data Speed [rpm] 1461 / 12 Total gear ratio [i] 121.46 Max. torque [Nm] 8,000 Output torque [Nm] 4370 SEW service factor 1.85 Mounting position IM M4B ISO designation CLP 220 Lubricant type Mineral oil Lubricant quantity [l] 31.50 Motor power [kW] 5.5 Motor frequency [Hz] 50 Duty cycle S1-S10 S1 Motor voltage [V] / Switching method 230/400 Delta/Star Rated current [A] 18.20 / 10.50 cos phi 0.84 Thermal class [°C]/Protection class [IP] 155(F) / 54 International efficiency class IE3 Efficiency (100% Pn) [%] 89.6 Efficiency at 50/75/100% Pn [%] 90.6 / 90.6 / 89.6 Ambient temperature min. [°C] -20 Ambient temperature max. [°C] 40 Brake voltage [V] / Brake torque [Nm] 400 AC / 80 Brake rectifier TS BGE1.5 Nameplate: German Weight 347.00 kg SEW Eurodrive gear motors – various types immediately available Several high-quality gear motors from the manufacturer SEW-EURODRIVE are available for sale in various sizes and designs. These drives are ideal for use in machinery and plant engineering, in conveyor technology, and for numerous industrial applications. Available types 1. SEW KH107/T DRN132S4/BE11HR/ASE1/TF Motor speed: 1,461 / 12 rpm Total gear ratio: i = 121.46 Max. permissible torque (Ma max): 8,000 Nm Ibsdpfx Aezrbgmoiyeb Output torque: 4,370 Nm 2. SEW KH77 DRN90L4/BE2/DI/DFC/IV Incl. decentralized inverter: DFC20A-0055-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 33 – 1.6 rpm Total gear ratio: i = 88.97 Max. permissible torque (Ma max): 1,550 Nm Output torque: 645 Nm 3. SEW KH67/T DRN90L4/BE2/ASB1/Z Speed: 1,461 / 26 rpm Total gear ratio: i = 57.28 Max. permissible torque (Ma max): 820 Nm Output torque: 560 Nm 4. SEW K57 DRN80MK4/BE1/ASB1/Z Speed: 1,435 / 13 rpm Total gear ratio: i = 108.29 Max. permissible torque (Ma max): 600 Nm Output torque: 395 Nm 5. SEW KH37 DRN71M4/BE05/DI/DFC/IV Incl. decentralized inverter: DFC20A-0020-503-A-T00-001/B Drive speed: 2,900 rpm Output speed: 30 – 1.5 rpm Total gear ratio: i = 97.81 Max. permissible torque (Ma max): 200 Nm Output torque: 177 Nm General information Manufacturer: SEW-EURODRIVE Robust industrial quality Various power and torque ranges available Some with integrated decentralized frequency converter (DFC) Ideal as a replacement drive or for new projects If you are interested, we will gladly send you further information, photos or the nameplates of the individual drives. An inspection can also be arranged upon request.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Iedpfxozhub Ae Aiyebb Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, power capacity / kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m Siemens 1FK6060-6AF71-1AH0 brushless servo motor, 3000 rpm, 6 Nm, with brake – in working order A second-hand, fully functional Siemens brushless servo motor from the 1FK6 series is for sale. Ijdpfez Aldwox Aiyjbb Manufacturer: Siemens Type: 1FK6060-6AF71-1AH0 Design: 3-phase brushless servo motor / synchronous servo motor Technical specifications: 6-pole servo motor Stall torque: 6.0 Nm (100 K) Rated speed: 3,000 rpm Form factor: IM B5 Protection class: IP64 Self-cooled Incremental encoder SIN/COS 1 Vss, 2,048 S/R Smooth shaft, tolerance N With holding brake Power and signal connection These specifications correspond to the Siemens data for the exact order number 1FK6060-6AF71-1AH0. The motor is in a used condition, consistent with its age, showing visible signs of wear, dirt and traces of oxidation/bearing wear on the housing. Please refer to the original photographs. The servo motor is in working order

Condition: used, mileage: 9,65,401 km, power: 290 kW (394.29 HP), first registration: 04/2016, fuel type: diesel, number of seats: 57, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: white, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: ready for operation (used), Sanyo Denki AC servo motor with F681024F06 / 09907 optical shaft encoder – presumed motor model: 20BM121FXPR1, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iedez Ddtqspfx Aiyobb

Condition: used, mileage: 38,546 km, power: 152 kW (206.66 HP), first registration: 05/2025, fuel type: diesel, number of seats: 31, gearing type: automatic, color: black, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, parking heater,

Condition: used, Year of construction: 2018, operating hours: 13,000 h, functionality: fully functional, power: 45 kW (61.18 HP), nominal power: 45 kW (61.18 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,776 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, type of input current: three-phase, overall weight: 340 kg, total length: 840 mm, total width: 450 mm, total height: 565 mm, torque: 290 Nm, type of cooling: air, protection type (IP code): IP55, We are offering this used SEVA TEC SEV-225M electric motor, manufactured in 2018. Removed from service in mid-2024. Power: 45 kW Speed (50 Hz): 1,480 rpm Speed (60 Hz): 1,760 rpm Rated voltage (delta): 400 V Rated voltage (star): 690 V Rated current (delta): 66.7 A Rated current (star): 38.5 A Iodpfx Aijzw Aucjyobb Rated voltage (delta) 60 Hz: 460 V Rated voltage (star) 60 Hz: 796 V Rated current (delta) 60 Hz: 80.1 A Rated current (star) 60 Hz: 46.0 A Frequency: 50/60 Hz Power factor (cos φ): 0.88 Protection class: IP 55 Insulation class: F Duty cycle: S1 PTC sensors: 3 If you have any questions or require further information, please do not hesitate to contact us.