Used Moving Blades for sale (6,685)

Condition: used, axle configuration: 3 axles, first registration: 10/2024, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: white, Year of construction: 2024, Color: white, RAL 9016 Complete with: - Aluminum chassis - Remote control - Small door in front wall - Wear plates on the floor and side walls - Smartboard - Wabco OptiTire tire pressure monitoring system For more information, contact Mark van der Steen = Further information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW ECO Air HD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; lift axle; Max. axle load: 9,000 kg; Tire tread left: 80%; tire tread right: 80% Rear axle 2: LM rims; Max. axle load: 9,000 kg; Tire tread left: 90%; tire tread right: 90% Rear axle 3: LM rims; Max. axle load: 9,000 kg; Tire tread left: 70%; tire tread right: 70% Weights Curb weight: 7,670 kg Payload: 34,330 kg Lsdpfx Akjyux Nfofjaa Gross vehicle weight: 42,000 kg Maintenance APK (periodic technical inspection): valid until 10/2026 Identification Registration number: OV-75-NB Further information Please contact Mark van der Steen for more details.

Condition: used, axle configuration: > 3 axles, first registration: 03/2017, total length: 14,010 mm, total width: 2,550 mm, wheelbase: 9,370 mm, color: grey, Year of construction: 2017, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Rear axle 4: Lift axle; Max. axle load: 9,000 kg Weights Lasdpoyi Ep Isfx Akfea Unladen weight: 9,120 kg Payload: 41,880 kg Gross vehicle weight: 51,000 kg Maintenance APK (main technical inspection): valid until 12.2026 Identification Registration number: OP-49-SK Further information Please contact Bob Beukers for more information.

Condition: new, Year of construction: 2026, - 200mm cutting height Ljdpfsca Hawsx Akfeaa - 750mm cutting width - 5-30m/min steppless feed - 90 KW Sawing Motor - 3KW Feed gearbox - 75mm Sawarbor

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers • 3200 kg weight • 55 kW saw motor • Complete electrical system, with control cabinet and control panel Laedpsxqd Nnsfx Akfsa • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered Ljdpfx Aeu Ngk Tjkfeaa accessories: Box with div. grinding wheels *

Condition: used, Year of construction: 1974, Technical details: Ledpewqplkefx Akfeaa total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Year of construction: 2025, condition: as good as new (ex-display), Thanks to the AULUMA EXACT, all common double-knife and standard knife blades as well as hedge trimmers can be resharpened quickly and efficiently in highest quality. Width 3m (maximum blade length in one clamping 2.4m). Versatile Adjustment and Infinitely Variable Grinding Angle Ljdsgvvxrepfx Akfoaa This enables grinding of all common types of knives. The knife is fixed clamped and does not need to be adjusted again. The grinding angles of 2 knives may be preselected and changed by means of a quick change switch. The angles can be easily read off via scales. The grinding depth can also be adjusted infinitely. Precise Guidance of the Grinding Machine Thanks to the predefined motion sequences, a constant, uniform grinding can be achieved very quickly. The blades maintain their straight shape – whereas freehand sharpening will damage the knives over time as they lose their shape. Zero-backlash Movements Due to Special Rollers with Ball Bearings Due to the special and robust design, there is almost no wear. The rollers and guides are galvanized and fit together perfectly – allowing for easy and zero-backlash movements. Incl. High-quality Angle Grinder From BOSCH and Special Grinding Wheel The variable speed angle grinder can be easily disassembled and thus used for other purposes. The special ceramic grinding wheel helps to avoid burning of the blades.

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Lodpfewk D Efjx Akfsaa Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor Type CNC Boring Mill YEAR OF MANUFACTURE: 1999 CNC CONTROL: Siemens Sinumerik 840C Spindle Internal Boring Spindle Taper: ISO 50 Boring Spindle Diameter: Ø 180 mm Spindle Speed Range: 2 – 1,600 rpm Spindle Motor Power: 100 kW Machine equipped with through-spindle coolant Working Capacity X Axis (Column Longitudinal Travel): 13,000 mm Y Axis (Head Vertical Travel): 5,000 mm Z Axis (Ram Cross Travel): 1,000 mm W Axis (Quill Stroke): 1,200 mm V Axis (Table Cross Travel): 3,000 mm Ram Section Dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Laedpfx Akeyari Aefea Rotary Table Dimensions: 4,000 x 4,000 mm Rotary Table Load Capacity: 80 tons Rotary Table Continuous Rotation: 360,000 positions, minimum angle 0.001° Number of Floor Plates: 2 Each Floor Plate Dimensions: 7,100 x 2,400 mm Total Floor Plate Area: 7,100 x 4,800 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) 1 x 90° milling head, indexing every 2.5° (C axis) Spindle oil chiller and hydraulic unit Operation manuals and electrical schematics

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: – max. cutting width: 3050 mm – min. cutting width: 450 mm – max. cutting height: 125 mm – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW Ledew Nau Sopfx Akfjaa – two feed speeds – material hold-down – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. Lsdpfx Akoyizxrefjaa The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, Technical Specifications Model: KMF10 Operated: Spring pressure Power: 10KVA (%50 DC) Welding Capacity: Up to 60mm mild steel strip Input Voltage: 220V (50Hz) Protection Fuse: 220V / 40A Welding Power Level: 5 Annealing Power Level: 5 Power Input Cable: 2,3m Protection Class: IP21 Dimensions (W/L/H): 160cm x 180cm x 79cm Lodpjvmyalefx Akfeaa Weight: 294Kg

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Lodpfx Akjymazasfsaa

Condition: new, Knife length 100 mm Lodpfslf I Eujx Akfoaa Knife width 30 mm Knife thickness 3 mm

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL9 running platform and a WF9 transport chassis. The maximum lifting capacity of the set is 18 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL9 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 12 LOADING CAPACITY 9000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPORTING POINTS 1 SHAFT LENGHT 1080 mm TURNING ANGLE OF SHAFT ± 90o Ljdpfsvxrxkox Akfsaa DIMENSIONS 840x583 mm WEIGHT 59 kg Technical parameters WF9 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 12 LOADING CAPACITY 9000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 320x200 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1000 mm WIDTH OF SPACNG ROLLERS 840-1230 mm WEIGHT 34 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A mobile platform for transporting machines and heavy goods weighing up to 2000 kg. They have polyurethane rollers that prevent damage to the floor in the place of transport. Transport rollers enable easy and safe transport of heavy items. Thanks to the use of rollers with polyurethane tread, the transported machine and the floor are not damaged. The platform has a foldable drawbar. Technical parameters ROLL SIZE Ø80x70 mm NUMBER OF ROLLS 5 LOADING AMOUNT 107 mm BEARING SURFACE ON THE ELEMENT Ø175 mm Laedpsvxrh Eofx Akfoa SUPPORT POINTS 1 DRAWBAR LENGTH 920 mm PLATFORM WIDTH 500 mm WEIGHT 38 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL18 running platform and a WF18 transport chassis. The maximum lifting capacity of the set is 36 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL18 ROLLERS SIZE 85x85 mm NUMBER OF ROLLERS 16 LOADING CAPACITY 18000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPPORT POINTS 1 LENGHT OF SHAFT 1080 mm TURNING ANGLE OF SHAFT Ljdpfxsvxrzfs Akfjaa ± 90o DIMENSIONS 1030x620 mm WEIGHT 137 kg Technical parameters WF12 ROLLERS SIZE 85x85 mm NUMBER OF ROLLERS 16 LOADING CAPACITY 18000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x407 mm SUPPORT POINTS 2 CONNECTOR LENGHT 1430 mm WIDTH OF SPACING ROLLERS 1014 - 1430 mm WEIGHT 50 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL6 running platform and a WF6 transport chassis. The maximum lifting capacity of the set is 12 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL6 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 8 LOAD CAPACITY 6000 kg LIFTING HEIGHT 110 mm BEARING SURFACE OF ELEMENT Ø170 mm SUPPORTING POINTS 1 LENGTH OF SHAFT 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 610x520 mm WEIGHT 41 kg Technical parameters WF6 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 8 LOADING CAPACITY 6000 kg Laodpfx Asvxrwaskfja LIFTING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x200 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1000 mm WIDTH OF SPACING ROLLERS 640 - 1030 mm WEIGHT 30 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL12 running platform and a WF12 transport chassis. The maximum lifting capacity of the set is 24 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL12 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 16 LOADING CAPACITY 12000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPPORTING POINTS 1 LENGHT OF SHAFT 1080 mm Lsdpfxovxrq He Akfsaa TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 1030x620 mm WEIGHT 80 kg Technical parameters WF12 ROLLERS SIZE 85x85 mm ROLLERS NUMBER 16 LOADING CAPACITY 12000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x407 mm SUPPORTING POINTS 2 CONNECTOR LENGHT 1430 mm WIDTH OF SPACING ROLLERS 1014-1430 mm WEIGHT 52 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL3 running platform and a WF3 transport chassis. The maximum lifting capacity of the set is 6 tons. Description Transport rollers allow safety and easy transport of heavy items. Thanks to the use the polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL3 size of rollers 85x85 mm number of rollers 4 loading weight 3000 kg loading height Ljdpfx Aksvxrauefjaa 110 mm bearing surface for the element Ø170 mm support points 1 lenght of shaft 950 mm turning angle of shaft ± 90o dimensions (L x W) 270x230 mm weight 12 kg Technical parameters WF3 size of rollers 85x85 mm number of rollers 4 loading weight 3000 kg loading height 110 mm supporting surface for the elements 150x150 mm support points 2 connector lenght 1000 mm spacing width between rollers 300 - 1000 mm weight 15 kg Manufacturer: Cormak

Condition: excellent (used), rotating bezel (28448) SPH 225 mm diameter 115 mm Laodpfx Aoq Habvekfja Dimensions, see photos Weight 11 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: MLS 250 P TR, saw blade diameter: 200 mm, overall weight: 4,200 kg, cutting length (max.): 2,500 mm, Multi-blade saw for wood cutting by Mario Zaffaroni & Figli S.r.l. Details: 1) Element length: min. 330 mm, max. 2500 mm 2) Element thickness: min. 2 mm, max. 100 mm 3) Feed (working) speed: 3–45 m/min 4) Maximum cutting (milling) depth: 20 mm for saw blades with 200 mm diameter Lajdpsyk U Ebsfx Akfoa 5) Total power: 55 kW 6) Main motor power: 45 kW 7) Weight: 4200 kg The machine is fully functional, requires no servicing. Very good condition.

Condition: used, mileage: 4,82,692 km, power: 324 kW (440.52 HP), gearing type: automatic, fuel type: diesel, tire size: 315/80 R22,5, axle configuration: 6x2, first registration: 08/2017, emission class: euro6, suspension: other, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, trailer coupling, = Additional options and equipment = - Airbags - Aluminium fuel tank Laedjyt Hffspfx Akfsa - Electric windows - Power steering - PTO (Power Take-Off) - Radio/CD player - Sun visor - Central locking = Further information = Front axle: Tyre size: 315/80 R22.5; Steered; Suspension: Parabolic suspension Rear axle 1: Tyre size: 315/80 R22.5; Twin tires; Suspension: Air suspension Rear axle 2: Tyre size: 385/65 R22.5; Suspension: Air suspension Empty weight: 11,193 kg Payload: 14,807 kg Gross vehicle weight: 26,000 kg Reference number: 38

Condition: good (used), Year of construction: 1989, functionality: fully functional, Sharpening machine for bandsaw blades Laedpfeydqguox Akfja

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/65, color: silver, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Rear doors - Air suspension = Notes = Fully equipped: - Remote control - Small door in front wall - Rotatable cross beam - Smartboard - 6x round rear lights - Stainless steel box (RVS box) = Further Information = General Information Year of manufacture: 2026 Axle configuration Tyre size: 385/65 Axle brand: BPW ECO Air HD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lifting axle; Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Weights Unladen weight: 7,990 kg Payload: 34,010 kg Gross vehicle weight: 42,000 kg Lsdpjyttavefx Akfoaa Condition General condition: very good Technical condition: very good Visual condition: very good Further information Please contact Mark van der Steen for more information.