Used Nameplate for sale (808)

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Ball valve Design: Container Notes: Frame, Fe (galvanised); slight variations in design possible; ball valve made of brass (nickel-plated) Overall width: 840 mm Overall height: 1,700 mm Gbsdpfjyckpaox Ab Aji Overall length: 1,250 mm Location: Bremen Nameplate: Volume: 1,000 litres Product contact material: V2A 1.4301 (AISI304) Condition: used Last application: alcohols and/or test petrols TANK Base type: frame EQUIPMENT Manhole / dome: in top plate (DN 400) Outlet: 48 mm Note: slight residues, signs of use

Condition: used, tank capacity: 70,800 l, GENERAL Design: horizontal Remarks: Manhole approximately 350 x 450 mm on the front bottom; one tank (9540-1) with a small dent under the bearing shell, one tank (9540-2) without a nameplate; up to 4 additional identical tanks can be made available upon request. The following saddle supports can be purchased separately for the tank: Total width: 3,000 mm Gbodpsyckn Nefx Ab Asi Total height: 3,000 mm Total length: 10,500 mm Location: external storage Nameplate: Volume: 70,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: water TANK Ends: Torispherical heads Base type: Saddles EQUIPMENT Outlet: available

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Ball valve Gbodeyckn Ajpfx Ab Aji Design: Container Remarks: Frame, Fe (galvanized) Total width: 840 mm Total height: 1,650 mm Total length: 1,240 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Last application: Methanol TANK Support type: Frame EQUIPMENT Manhole / dome: in top head (DN 400) Outlet: 35 mm Note: Signs of wear

Condition: used, tank capacity: 1,251 l, GENERAL Equipment: Ball valve Design: Container Remarks: Frame, Fe (galvanized); 2" outlet; minor dents possible; acceptance certificates mostly available (for 5 of the containers the acceptance certificate specifies material as V2A; however, the nameplate states V4A and subsequent measurements also confirmed V4A) Outer diameter: 1,120 mm Inner diameter: 1,120 mm Total height: 1,750 mm Location: Bremen Technical documentation: Acceptance certificate Gbedeyckm Sopfx Ab Aei Nameplate: Volume: 1,251 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Last application: Chemicals (polyurethanes) TANK Support type: Frame EQUIPMENT Manhole / Dome: in top head (DN 400) Remark: light residues, signs of use

Condition: used, tank capacity: 600 l, GENERAL Equipment: Disc valve Design: Container Remarks: Some larger residual fruit pulp on the interior Internal diameter: 790 mm Total height: 1,740 mm Max. positive pressure: 1.0 bar Location: Bremen Nameplate: Vacuum: 0.15 bar Volume: 600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 1,030 mm Previous use: Food TANK Base type: Feet Number of feet: 4 EQUIPMENT Manhole / Access port: in the top head (DN 400) Gbsdjyckm Ejpfx Ab Aoi Outlet: DN50 DIN 11851 Note: Light residue, signs of use MATERIAL SPECIFICATION Feet material: Stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanised); manway cover fastening screws made of Fe; top head dome-shaped upwards (see photos) Overall width: 1,010 mm Overall height: 1,610 mm Overall length: 1,210 mm Location: Bremen Nameplate: Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Gbjdpsyckmfjfx Ab Aoi Last application: Pharmaceutical industry VESSEL Bottom head: eccentric cone Support type: frame FITTINGS Manway / Dome: in the top head (DN 400) Outlet: DN50 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 7,500 l, GENERAL Design: horizontal Outer diameter: 1,400 mm Overall height: 2,120 mm Overall length: 5,500 mm Location: outdoor storage Gedpfeyckkqsx Ab Ajbi Nameplate: Volume: 7,500 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used TANK Max. permitted operating temperature: 50 °C Ends: Klöpper head Support type: welded saddles Number of supports: 2 pieces EQUIPMENT Manhole / dome: in the cylinder Outlet: 50 mm TECHNICAL DATA / DIMENSIONS Ground clearance: 300 mm Bottom head thickness: 4 mm Top head thickness: 4 mm

Condition: used, tank capacity: 300 l, GENERAL Design: vertical Remarks: Some of the manhole closures are missing. The wheels are missing. There is a special flange at the outlet; we can adapt this to a connection of your choice for €474. We can modify the tank for you—please contact us for a non-binding quotation. External diameter: 720 mm Overall height: 1,430 mm Max. overpressure: 1.0 bar Location: external storage Nameplate: Vacuum: 3.0 bar Volume: 300 liters Cylinder wall thickness: 3 mm Product-contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 650 mm Previous use: pharmaceutical TANK Max. permitted operating temperature: 132°C Foot design: feet Number of feet: 4 pieces Godjyckkkspfx Ab Ajbi EQUIPMENT Outlet: 50 mm TECHNICAL DATA / DIMENSIONS Ground clearance: 290 mm Bottom wall thickness: 5 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Disc valve Design: upright Remarks: 1 manhole approx. 310 x 410 mm located in the cylinder; 1 bolted outlet fitting with disc valve increases the outlet to DN 50 DIN 11851; tank was professionally cleaned and overhauled in 2024; brand new drain valves and manhole gaskets installed Gbsdpfx Abeyckhve Aoi Internal diameter: 1,230 mm Overall height: 2,950 mm Location: Bremen Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical height: 1,910 mm Last application: wine storage TANK Supporting type: legs Number of legs: 3 pieces EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Leg material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.3 mm Top wall thickness: 4.5 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Disc valve Design: oval Remarks: 1 manway in the front end; Tank 1 with stacking device (can be used to stack Tank 2, which does not have a stacking device); the tanks were professionally cleaned and overhauled in 2024; brand-new residual drain valves (DN 50 DIN 11851 with disc valve; actual tank outlet with a smaller diameter – presumably DN 40) and manway gaskets were installed; Tank 1 without nameplate and with more significant dents in the shell (see photos) Overall width: 730 mm Overall height: 1,850 mm Overall length: 2,800 mm Location: Outdoor storage 89340 Leipheim Nameplate: Volume: 2,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage Gjdoyckhpopfx Ab Asbi TANK Support type: feet Number of feet: 4 pcs MATERIAL SPECIFICATION Material of feet: stainless steel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Gsdpfxoyckhij Ab Aobi Remarks: Frame, Fe (galvanised; partially bent and with signs of corrosion); slight variations in version possible; individual nameplates may be missing Overall width: 1,230 mm Overall height: 1,650 mm Overall length: 1,030 mm Location: Bremen Nameplate: Volume: 1,000 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Last purpose of use: Fragrances and dyes for the beverage industry TANK Base design: Frame EQUIPMENT Manhole / Dome: in the top (DN 400) Outlet: DN50 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 1,000 l, GENERAL Features: Ball valve Design: Container Remarks: Frame, Fe (galvanized; partially with signs of corrosion); slight metallic discoloration on the inside; 1 unit in stock in Bremen Manufacturer: Blefa (minor variations in design) Internal diameter: 1,070 mm Overall width: 1,100 mm Overall height: 1,680 mm Overall length: 1,200 mm Location: 21 x Bremen, 152 x external warehouse Technical documentation: drawing Nameplate: Gbodsyckhcspfx Ab Aji Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 930 mm Previous application: paint industry TANK Type of stand: Frame EQUIPMENT Manhole / Dome: in the top head (DN 400) Outlet: 76 mm Note: slight residues, signs of use

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, V2A; manhole diameter approx. 505 mm; outlets partially slightly curved upwards Internal diameter: 1,120 mm Overall width: 1,220 mm Overall height: 1,680 mm Overall length: 1,220 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 920 mm Last application: Pharmaceutical TANK Mounting type: Frame EQUIPMENT Manhole / Dome: in the top head Outlet: 72 mm Note: Signs of use Gbsdsyckgfspfx Ab Asi

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, V2A; manway diameter approx. 505 mm; a small part of the containers is slightly higher with an overall height of approx. 1,720 mm; minor dents in the lower bottom; outlets slightly pressed into the lower bottom; on 1 container, 1 frame brace is bent Internal diameter: 1,120 mm Overall width: 1,200 mm Overall height: 1,680 mm Overall length: 1,200 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 900 mm Last application: Pharmaceuticals TANK Supporting structure: frame EQUIPMENT Gbodpfxoyckf Ue Ab Asi Manway / dome: on top head Outlet: 72 mm Note: signs of use

Condition: used, tank capacity: 67,000 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Total height according to drawing (slight deviations possible); manhole cylinder NW 600 Internal diameter: 3,000 mm Total height: 11,100 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: drawing, inspection certificate Nameplate: Volume: 67,000 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 8,870 mm Last application: Solvents Gbjdpfx Aeyckf Iob Aei VESSEL Max. allowable operating temperature: 100 °C Base type: legs Number of legs: 4 pcs EQUIPMENT Manhole / dome: in cylinder, in top head (DN 600) Outlet: 100 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 9 mm Top wall thickness: 6 mm

Condition: used, tank capacity: 1,050 l, GENERAL INFORMATION Equipment: Butterfly valve Design: Container Remarks: Container bolted onto a drive-under steel frame (galvanized); butterfly valve very stiff to operate (possibly defective); stacking brackets slightly bent in places; container with minor dents Overall width: 1,200 mm Overall height: 1,630 mm Overall length: 1,000 mm Location: Bremen Nameplate: Volume: 1,050 liters Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last application: Fragrances and colorants for the beverage industry TANK Gsdpfx Absyckfzs Ajbi Support type: Frame EQUIPMENT Manway / Access hatch: on top (DN 400) Outlet: DN50 DIN 11851 Note: Signs of wear

Condition: used, tank capacity: 1,000 l, GENERAL Design: Container Comments: Different manufacturers, so there may be minor differences in construction (e.g., manhole cover); different outlet valves (with the black rotary valves—see photos—outlet diameter approx. 55 mm); drawing available for brand Eurocont Internal diameter: 1,000 mm Total height: 1,850 mm Location: Bremen Technical documentation: Drawing Nameplate: Volume: 1,000 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 960 mm Last application: pharmaceuticals TANK Mounting: Feet Number of feet: 4 units EQUIPMENT Manhole / Dome: on top (DN 400) Godsyckfujpfx Ab Ajbi Outlet: 50 mm Note: Signs of use MATERIAL SPECIFICATIONS Feet material: Stainless steel

Condition: used, tank capacity: 31,000 l, GENERAL Gbsdpfsyckfnjx Ab Aoi Equipment: Crane lugs Design: upright Inner diameter: 2,800 mm Total height: 5,800 mm Location: outdoor storage Nameplate: Volume: 31,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: fruit juice TANK Base design: height-adjustable feet Number of feet: 5 pieces EQUIPMENT Outlet: available MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 2,600 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Test pressure according to nameplate: 3 bar; 1 tank with 1 dent at the transition between cylinder and top head; also, one of the tank’s feet is slightly bent (see photos) Internal diameter: 990 mm Total height: 4,000 mm Location: Bremen Nameplate: Volume: 2,600 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,020 mm Previous use: cosmetics Gedpoyckfhofx Ab Aebi TANK Support type: legs Number of legs: 4 pieces EQUIPMENT Manhole/dome: in the top head (DN 400) Outlet: 32 mm Note: slight residues, outlet end cut off MATERIAL SPECIFICATION Material of legs: stainless steel

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Foot ends cut off (see photos) Internal diameter: 1,190 mm Total height: 3,850 mm Max. overpressure: 1.0 bar Gbedpfxsyckfbj Ab Aji Agitator: propeller Location: Bremen Nameplate: Volume: 2,500 liters Cylinder wall thickness: 4 mm Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,500 mm Last application: cosmetics TANK Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head (DN 600) Outlet: 34 mm Note: Motor/gearbox missing, outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Agitator arrangement: eccentric in top head TECHNICAL DATA / DIMENSIONS Head wall thickness: 5 mm

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Butterfly valve Design: Tank/container Remarks: Manhole diameter approx. 385 mm; two larger dents at the transition from the cylinder to the dish ends; slight corrosion inside the container Internal diameter: 1,190 mm Total height: 2,000 mm Max. overpressure: 0.49 bar Location: Bremen Nameplate: Gjdpfxsyckdds Ab Asbi Volume: 1,000 liters Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 730 mm Previous application: Pharmaceuticals TANK Bottom: Eccentric cone Support type: Feet Number of feet: 4 pieces EQUIPMENT Manhole/dome: in top head Outlet: 48 mm MATERIAL QUALITY Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.4 mm Top wall thickness: 2.5 mm

Condition: used, tank capacity: 800 l, GENERAL Equipment: Disc valve Design: Container Remarks: Manhole diameter approx. 385 mm; slight variations in design; 1 container with a nameplate (barely legible) and with an outlet pipe inside diameter approx. 35 mm (this container has a minor dent at the cylinder-to-bottom transition) Internal diameter: 1,190 mm Total height: 1,680 mm Location: Bremen Volume: 800 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 550 mm Previous application: Pharmaceutical TANK Support type: Feet Number of feet: 4 pieces EQUIPMENT Gedoyckc Tepfx Ab Ajbi Manhole / Dome: On the top Outlet: 48 mm MATERIAL SPECIFICATIONS Feet material: Stainless steel

Condition: used, tank capacity: 28,100 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Tank has dents in the shell (vacuum damage; see photos); manhole diameter in the shell approx. 600 mm; feet ends cut off; 3 dip pipes inside the tank; specified total height includes connection of ring line at top head; outlet with flanged reducing fitting Internal diameter: 2,600 mm Gjdpfx Aeyckcyeb Asbi Total height: 7,700 mm Max. overpressure: 1.0 bar Location: Bremen Technical documentation: drawing, various documents, acceptance certificate Nameplate: Volume: 28,100 liters Shell wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 4,594 mm Last application: chemical industry TANK Max. allowable operating temperature: 100 °C Mounting type: legs Number of legs: 4 units EQUIPMENT Manhole / dome: in shell, in top head (DN 600) Outlet: flange DN100 Note: slight residues MATERIAL COMPOSITION Material of legs: steel TECHNICAL DATA / WEIGHTS Bottom wall thickness: 8 mm Top head wall thickness: 5 mm

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: Frame, Fe (galvanized); Manhole diameter approx. 415 mm Overall width: 840 mm Overall height: 1,650 mm Overall length: 1,240 mm Location: Bremen Nameplate: Volume: 1,000 liters Gbodpfx Asyckctjb Aoi Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: Cosmetics VESSEL Support type: Frame EQUIPMENT Manhole / dome: in top head Outlet: DN65 DIN 11851 Note: Signs of use

Condition: used, tank capacity: 29,250 l, GENERAL Equipment: Spray head, lifting lugs Design: horizontal Remarks: Manhole diameter: approx. 600 mm; saddles made of 1.4301 (V2A) Internal diameter: 2,400 mm Overall length: 6,800 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: drawing, various documents Nameplate: Vacuum: 0.25 bar Volume: 29,250 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical length: 5,800 mm TANK Gbjdpfjyckcmsx Ab Aei Max. perm. operating temperature: 100 °C Tank ends: Klöpper heads Support design: saddles EQUIPMENT Manhole / dome: on the tank Outlet: Flange DN100