Used Feeding Technology for sale (33,498)

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Kjdpfx Abokpwuuecedi Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Feeding technology / feeding system / vibratory feeder / sorting unit / bowl feeder Vibratory bowl, sorting device / screw feeding with vibratory feeder for screwdriving applications Feeding system DEPRAG Type: 0622-P/0.75-1S Kodpfx Absh Ap Idecsdi No.: 1183884 Year: 2011 - 2012 The unit was used for feeding contact pins for electrical connectors. Product dimensions: Ø 4 mm, length 26 mm The pins are stocked in the material hopper; the conveyor belt transfers the pins as required into the bowl feeder. The bowl feeder, equipped with two sorting tracks, delivers the pins to the product turner. The product turner orients the product to the desired position and releases it for further processing. The unit comes from a prototype system. External electrical control is not included and should be provided by a PLC. Without modification, also suitable for automatic and correctly oriented feeding of threaded studs up to M4 x 26. The unit consists of the following components: 1 pc. belt hopper / feeding conveyor DEPRAG Type: B 10 Serial no.: 1178200 Order no: 415050A Year: 2011 Filling volume: 10 liters Belt speed: 100 mm/min Operating voltage: 24 Volt (DC) - Belt surface: profiled - Foldable stainless steel chute Weight: 11 kg 1 pc. bowl feeder vibratory bowl KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm - Bowl feeder with two sorting tracks and two product outlets Operating voltage: 230 Volt, 50 Hz. 1 pc. DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Production no.: 35 pcs. FESTO product turner with 180° swivel range - 1 FESTO valve terminal CPV10-GE-MP-8 - 1 FESTO valve terminal CPV10-VI - Special pneumatic components (compressed air supply approx. 6 bar) - 2 pcs. MURR base modules type MVP12 - Complete unit mounted on a steel plate with 4 support feet Dimensions L x W x H: 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Year of construction: 2017, Drawn, hydraulic folding, support foot / / wheel / / _____ / 10 ROTARY / TURNERS / BALLOON TYRES / WARNING WHEELS / LIGHTING / Kodsqrrpajpfx Abcjdi

Condition: used, Year of construction: 2014, Hydraulic folding, support foot / wheel, / rear attachment / _____ / hydr. inclined running device / drives Gyro transitions good condition / Kodpfx Aeqrrrrobcedi

Condition: used, Year of construction: 2013, Loading stage, cross conveyor belt / _____ / 2 auger mixers / hydraulic support leg / rear discharge conveyor / Kdodpfx Absqrrtpecsi

Condition: used, Year of construction: 1996, working width: 6 mm, Equipment: lighting, Lighting, warning signs, balloon tires, / PTO shaft, / Digidrive system / / / Kjdpfx Abotyqm Hocodi

Condition: used, Year of construction: 2011, Working width DIN (m) 13 / Transport width (m) 2.4 / No. of rotors 12 / No. of tine arms per rotor 6 / Trailed attachment / Tyres Super-Balloon 16 x 6.50 - 8 / Drive DIGIDRIVE® finger claw clutch / / Weight approx. (kg) 2550 / Edge spreading pr Kdedpfx Aeqrrrgebcoi

Condition: used, Year of construction: 2015, First registration: / 01.01.2015 / _____ / machine type: SM-P-1-10ZK / incl. straw blower / hopper volume: 1000m³ / feed discharge on both sides / hydraulic support leg / mixing system: vertical mixer / scales defective! / Kjdpfx Aoqrryrebcsdi

Condition: used, Year of construction: 2012, Scales Double-sided outlet 2 augers / Kdedeua Hriepfx Abcji

Condition: used, Year of construction: 2010, mechan. Slider on both sides Adding scales Tires 400/60-15 / Kjdot Sq Sxjpfx Abcjdi

Condition: used, Year of construction: 2016,

Condition: used, Year of construction: 2019, Transport trolley Warning signs / Kdedpfx Abjtya Itscei

Condition: used, machine/vehicle number: 19758, Drum width: 2m Diameter with buckets: 0.90 m PTO shaft / Kjdpfxer Hn S Tj Abcodi

Condition: used, Year of construction: 2023, Three-point linkage Electric lighting CE Equipment package / Standard PTO shaft fitted / Kjdpsuifvljfx Abcsdi

Condition: used, Year of construction: 2022, electric lighting jockey wheel 16/6.50-8 night swath gear hydr. / wheel spreading device / Kodpet I Hbusfx Abcedi

Condition: used, Year of construction: 2011, Front right slider Rear hinge / Kdodpfx Abetvfz Djcei

Condition: used, Year of construction: 2013, Three-point attachment Lighting with warning signs / Kjdpfxotwyw Ne Abcsdi

Condition: used, Year of construction: 2023, Spreading device additional standard PTO shaft mounted jockey wheel 15/6.00-6 / Kedpfxethhcwo Abcsdi

Condition: used, Year of construction: 2019, Action package 1 Walterscheid wide-angle articulated top hitch / electro-hydraulic operation Hopper inner ring (straw ring) Reduction gearbox / 1000 rpm with el. hydr. operation Umscha pneumatically braked axle 20 m3 / i-FeedGood L with 4 weighing rods Kdsdpfjttv Imsx Abcoi

Condition: used, Year of construction: 2014,

Condition: used, Year of construction: 1999, hydr. folding balloon tires / Kodpfouh Ugqex Abcodi

Condition: used, Year of construction: 2011,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 100 W, laser wavelength: 1,070 nm, empty load weight: 1,200 kg, number of axes: 4, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fibre Laser: Power: 100 W Wavelength: 1070 nm Number of axes: 4 MACHINE DETAILS Kdjdpfjxtmx Dex Abcei Dimensions & Weight Machine dimensions (L x W x H): 160 x 140 x 170 cm Machine weight: 1,200 kg Bar Feeder Model: Iemca Elite 112 / Type: 32LL Bar feeder year of manufacture: 2010 Bar feeder dimensions (L x W x H): 420 x 60 x 140 cm Bar feeder weight: 500 kg EQUIPMENT Iemca Elite 112 bar feeder

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter - Full ductwork and connection components Main technical data: - Maximum slab width: 1010 mm - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase Kodpfsyk Dmnex Abcedi - Approx. 3,000 operating hours (2014–2019) This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: Ksdpjlatz Defx Abcedi - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm