Used Magnetic Plate for sale (16,087)

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate BRAILLON type BJP. Length: 350 mm, width: 150 mm, height: 110 mm. Connection: 110 Volt DC. Power: 0.65 Amp. The magnet is tiltable up to 90° and features a sine table base. Net weight: 45.8 kg. Hjdsxcimcopfx Aabjfn

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m². Hfjdpfx Aaetq I Rqjbon

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck Hodpfxoxd Upfs Aabofn -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

Condition: ready for operation (used), Plate size: 170 x 480 mm plate height: 95 mm changing pole spacing: 12,5/25 mm Hsdpfx Aaod Ef S Eobefn electr. connection: direct current 110 V

Condition: used, Permanent circular magnet Diameter: 220 mm Hfjdpfxow Smk Se Aaben Height approx.: 70 mm Weight approx.: 16 kg

Condition: new, Year of construction: 2025, For sale: Due to changes in the business sector within the manufacturing operations and a production transition, we are offering a SCHUNK magnetic clamping plate for immediate sale. SCHUNK Magnetic Clamping Plate MFPS-A1-L30 1600x800 Year of manufacture: 2025 / NEW! Hedpfx Aewlhqhoabsfn Description: For professional use in industrial and trade environments. Product Features: - Electropermanent magnetic clamping plate - Status indicator - Quick-connect with closure cover - Technology: Parallel pole - Magnet type: AlNiCo + Neodymium - Without low residual magnetism cycle Technical Data: - Dimensions: 1600 x 800 x 100 mm - Pole orientation: transverse - Pole pitch: 30 + 10 mm (steel + resin) - Number of poles: 36 (360x M6 pole threads) - Clamping force: up to 160 N/cm² - Number of channels: 4 - Connection: 7-PIN - Electrical connection: 400V / 460V - Protection rating: IP 67 - Max. operating temperature: 80°C - Weight: 900 kg Scope of delivery: 1x Magnetic Clamping Plate MFPS-A1-L30 1600x800 1x Connection cable ILME PLUS - 1x7PIN 4CH - 5 METERS 1x Control unit KEH PLUS 04 400V/50HZ 1x Operating manual 1x EC Declaration of Conformity Note: - With optical status indicator on the clamping plate to display clamping status (Red/Green) - Magnetic clamping plate with 100mm thickness for improved rigidity with large size - Mounting bores suitable for machine table - Protection rating IP 67 with closed cover Condition: NEW! Original price: Net 24,000€ IMPORTANT: For logistical reasons, we only sell within Europe. The buyer is responsible for removal, loading, and transport. "The seller excludes any warranty for the purchased goods. The goods are sold as is, without any guarantee for their suitability for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damages arising from the use of the goods. Any claims by the buyer against the seller are excluded." Status: 09.09.2025 Price: 12,500€ negotiable / plus VAT Prices are net, VAT not included For inquiries and further information, please do not hesitate to contact me.

Condition: used, Electro sine magnetic chuck, sine magnet, E-sine magnetic clamping plate, type JDX 7. Length: 255 mm, width: 130 mm, height: 120 mm, power: 0.55 kW, connection: 380 Volts, 50 Hz. The magnet is tiltable up to 90° and features a sine support surface. Hsdpfsxcimiox Aabofn

Condition: used, Year of construction: 1990, length 600 mm width 400 mm height 100 mm weight of the machine ca. 200 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Hedpfsfgv Ddsx Aabofn +++++

Condition: used, length 1600 mm width 400 mm height 115 mm weight 480 kg The magnetic clamping plate is in good, ready-to-use condition. Length: 1600mm Hsdewth T Sepfx Aabofn Width: 400mm Height: 115mm Weight: 480kg

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 Hsdpfx Aown D Tweabefn -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Total weight: 9.8 kg

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. For a steel nut M5 approx. 60 mm Hsdpfstqfhxox Aabjfn For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: good (used), Manufacturer: TecnoMagnet Type: SQ Year of manufacture: 2000 12 magnetic tables and 1 control unit Electropermanent magnetic clamping system Clamping all kinds of jobs such as: Face milling, lateral drilling, round bar facing and slots drilling Coupled parts machining and forged parts machining Edge milling and chamfering Plates machining at right angle Flattening through drilling and pocket execution Separate MCC control box with quick connection Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (estimate) Length 1000 mm Width Hfjdpfswpucfox Aabjn 500 mm Height 55 mm Weight 140 kg Please note: The information on this page was provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend that you check all important details.

Condition: used, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic plate: 115 x 115 mm Clamping range: 110 x 75 mm Magnetic plate height: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Hjdpfsdz Sqxsx Aabefn Power input: 1 ampere Operating voltage: 24 volts DC (V/DC) - Mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for tool & die making for tapered, back-ground cutting plates or mold inserts.

Condition: used, Year of construction: 1990, Lifting capacity 2,5 t weight of the machine ca. 80 kg Hodpfx Aed N Suxoabsfn +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, length 1060 mm width 400 mm height 90 mm weight 270 kg The magnetic clamping plate is in good, ready-to-use condition. Länge: 1060mm Breite: 400mm Hfsdpfewth Txox Aaben Höhe: 90mm Gewicht: 270kg

Condition: used, Magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate Hjdedv Thhopfx Aabofn -Clamping surface: 100 x 100 x 300 mm -Dimensions: 100/100/H360 mm -Weight: 18.4 kg

Year of construction: 2016, condition: new, machine/vehicle number: DMPMP260x104x41,5, Plate magnet in NdFeB Neodymium version 260 x 104 x 41.5mm Hfedpfx Aec Tctkeabsn Completely welded housing 4 tapped holes M8x20mm Edge distance: 40mm -BHmax: 263-279 kJ / m³ Br: 1170-1210, JHc:> 955KA / m Maximum operating temperature: 80 ° C This is an overproduction which has not been accepted by the customer. More than 10 pcs.

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg Hfjdswth Trepfx Aabon We have two identical magnetic chucks with the same dimensions. See S9064

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos -Dimensions: Ø 275 x 115 mm -Total weight: 30 kg Hfjdpjv U Nwijfx Aabsn

Condition: used, length 700 mm width 300 mm height 90 mm weight 110 kg The magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 300mm Height: 90mm Hfjdpfx Aowth Tlsabsn Weight: 110kg

Condition: used, Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg Hsdpfjh R D Rdox Aabjfn

Condition: used, length 900 mm width 505 mm height 110 mm Hodjwth Tfopfx Aabefn weight 310 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 505mm Height: 110mm Weight: 310kg We have two identical magnetic chucks with the same dimensions. See S9062

Condition: good (used), electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg Hfsdpfjv Ui T Rox Aabjn

Condition: used, length 900 mm width 300 mm height 90 mm weight 160 kg The magnetic clamping plate is in good, ready-to-use condition. Length: 900mm Width: 300mm Height: 90mm Weight: 160kg Hsdpfx Aajwth S Usbofn

Condition: used, length 500 mm width 250 mm height 80 mm weight 90 kg The magnetic clamping plate is in good, ready-to-use condition. Hfodpswth S Ijfx Aaben Length: 500mm Width: 250mm Height: 80mm Weight: 90kg