Used Narrow Track Tractors for sale (8,724)

Condition: excellent (used), EUR 250.00 per piece, height-adjustable from 0.68 m to 1.1 m Cajdpfjxqm Adox Addsa 2 rollers, total width 260 mm Roller diameter: 108 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 926 h, Aisle Master 20S Articulated forklift Csdov Ipdispfx Addsaa Serial: 30870 2016, gas, capacity 2000Kgs, lift height 4750mm, 3 stage full free lift mast, side shift, only 926 hours on the clock

Condition: excellent (used), Year of construction: 2011, Cloos Qirox robot QRC 320 incl. control unit V 6, Offline laser ( instead of gas nozzle sensor for fast search process, arc seam search, spot editor Quinto II 603 welding machine (600 A pulse machine), wire feeder, Cajdpfx Asizklnsddja 1 workpiece manipulator HWR 30000, 2 workstations, pick-up weight per station 2500 kg, face plate distance 4500, turning radius 750 mm Floor track with C stand, travel distance 4 m, for suspended arrangement of the robot Light barrier, start preselection Option: conversion from 320 to 350 ( enlargement of working area possible)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm Cajdpfxew U El Te Addea - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Offered for sale is a used heavy-duty roller conveyor system. Components: 6 pieces, 4.00 m long, 1.00 m wide, 7 pieces, 1.40 m long, 1.00 m wide, Casdexl R Ruepfx Addea 1 turning station, 1.00 m wide, 4 pieces, 3.70 m long, 1.80 m wide, 1 piece, 2.80 m long, 1.80 m wide. All parts are fully functional and equipped with drives. In very good condition.

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Caodoigl R Ropfx Addja Shipping by courier, collection preferred Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: like new (used), Year of construction: 2021, Engel VC320/80 fast track (2021) Tie bar less machine CC300 controll Clamping force: 80 t Screw diameter: 35 mm Shot volume: 144 cm3 Type: Horizontal Drive: Hydraulic Cjdpewzzw Tsfx Addoaa Machine has only 2000 hours!

Condition: new, Year of construction: 2024, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 5 mm, coil weight: 4,000 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, cutting speed: 40,000 mm/min, product height (max.): 3 mm, working width: 600 mm, type of input current: three-phase, total width: 3,500 mm, total length: 12,000 mm, total height: 2,200 mm, Coil Slitting Line Satılık Rulo Sac Dilme Hattı 0.5 - 3 mm Thickness x 600 mm Width x 6 Ton Coil Weight Ideal line for production of Galvanized Grounding Strip production. Topraklama şeridi imalatı e dar bant dilimleme işlemleri için ideal bir hat. Caedpfx Aotpviqoddoa Please contact for further details. #coil #slitting #coilslitting #slittingline #uncoiler #decoiler #slit #recoiler #tensioner #coilprocessing #earthing #grounding #grounding #GalvanizedGroundingStrip #GroundingStrip #Strip #topraklama #topraklamaseridi

Condition: used, Year of construction: 2013, functionality: fully functional, – CE certificate – Year of manufacture: 2013 TECHNICAL SPECIFICATIONS: – Max. blade diameter: Ø 380 mm – Min. blade diameter: Ø 200 mm – Track width: 300 mm – Max. workpiece width: 750 mm – Cutting height: 10-120 mm – Set for short workpieces INCLUDED for FREE!!! – Spindle diameter: Ø 55 mm – Sleeve diameter: Ø 70 mm – Min. workpiece length: 600 mm – Working table height: 740 mm – Main spindle speed: 4000 rpm Cjdpfow H R N Njx Addeaa – Air requirement for extraction: 3800 m³/h – Extraction air velocity: 25-35 m/s – Extraction outlet: 2 x Ø 150 mm – Table dimensions: 1760×770 mm – Number of revolutions: 4000 rpm – Variable feed speed via inverter: 4-30 m/min – Electric cutting height adjustment – Feed motor power: 2.2 kW – Total power: 39 kW – Digital feed speed display – Automatic lubricating system with adjustable settings – Automatic star-delta starter – Overall dimensions (L/W/H): 1900 x 1600 x 1750 mm – Weight: 2600 kg

Condition: used, functionality: fully functional, machine/vehicle number: 6117, Year of construction: 2012, operating hours: 2,416 h, load capacity: 2,000 kg, lifting height: 5,020 mm, fuel type: electric, mast type: triplex, construction height: 2,540 mm, drive type: Elektro, Narrow-aisle forklift truck Chassis number: 6117 Mast type: Triplex Gearbox: Automatic Casdpfx Adoxglyaodja Technical condition: normal 3rd valve, 4th valve, roof cover, windshield, half cab, - side shift - telescopic tines - non-marking tires - work lights - rotating beacon

Condition: excellent (used), SCM M3 multi-track saw Width of track 300mm Cutting height max 120mm Caodpfsm Rg Dgex Addsa Main engine power 37kw Feed speed adjustable on variator 6-45m/min Disc diameter max/min 350/200mm Maximum piece width 1000mm Minimum workpiece length 600mm 3 rows of anti-rejection latches Spindle diameter 50mm Bushing diameter 70mm Central track lubrication CE certificate Extraction spigot 200mm

Year of construction: 2002, condition: excellent (used), machine/vehicle number: SI4to, ! bargain price ! Vetter / steel bridge crane crane runway overhead crane gantry crane monorail Type P300S Length of steel construction approx. 4.2 x 2.6 m Outside edge of portal approx. 4.2x2.6m, inside edge of portal approx. 3.7x1.9m Lower edge of the bridge approx. 3.8m, hook height 3.2m max construction height (OK) of the system approx. 4.6 m Lower edge purlin / bracing approx. 3.57 / 4.2 m Track HEA340, supports square tube 200x200mm Ledgers / purlins IPE240/HEA340 Steel hoist SH5025-20 4/1 BJ 2001, lifting height approx. 8m support spacing: Running track with overhang length approx. 6.5 m Payload / lifting capacity 4000 KG / 4t incl. power supply rail, control cabinet and corridor control Csdpfx Ajktkzbeddeaa Connection to 400V 16A Very good condition Year of construction 2004, complete crane book is available Shipping by courier, collection preferred Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor Caedpfx Adju Uwygodoa - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 1,500 kg, lifting height: 9,000 mm, construction height: 5,900 mm, Equipment: cabin, pallet forks, Offered here is a very narrow aisle forklift by Linde, manufactured in 2023. The machine is in new condition and is currently not in use. From a safety perspective, the machine meets the latest standards. It still needs to be assembled before being operational. Mast - Linde standard clear view mast - Heavy-duty, with a maximum load capacity of 1500 kg - Lift height: 9,000 mm - Gripping height: 11,060 mm - Mast height: 5,900 mm Fork carriage - Side-shifting fork carriage for maximum aisle width - Aisle width (AST): 1,870 mm - For manually adjustable forks (50 x 120 mm) Fork dimensions - Forks for side-shifting carriage, cross-section 50 x 120 mm - Fork length according to load dimensions (range: 800 – 1,400 mm) - Lowered height h13: 60 mm An inspection of the machine is possible upon request and by appointment. Caedpjxc Eddsfx Addsa If you have any further questions, feel free to contact us.

Condition: ready for operation (used), functionality: fully functional, Belt sander for narrow elements Specification: • condition - used • 2 belt speeds • right/left rotation • table top dimensions 50 x 50 cm • 1.1 kW (380V) engine • double-sided culaga with a hoof for profiles Caodpfxovur Ecj Addsa • culaga adjustable at an angle and up/down • belt width - 40 mm • dimensions - 60 x 60 x 160 cm (length x width x height) Additional information: • good technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Single-Sided Narrow Edge Bander IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with Servo Unit for Corner Copying MFA Year of Production: 2009 Condition: Very good Features: * Stable machine frame with mounted processing units * Electronically adjustable feed speed: 6–30 m/min (feed rate of processing units is not synchronized with full feed adjustment) * Feed chain guided in sliding rails with plastic pads and 80 mm wide rubber lining * Automatic lubrication of feed chain controlled by the machine program * Upper pressure roller: double V-belt, 70 mm wide, on ball-bearing rollers; electronically adjustable * CE-compliant machine safety * Noise-reducing and protective covers * Edge banding unit with drive enclosed in sealed oil bath and glue pot (1 main pressure roller + 5 auxiliary rollers); Quick-Lock pneumatic glue pot system for fast replacement * Touchscreen display * End trimming saw unit for cutting excess edge at front and rear corners, including: pneumatic saw adjustment 0–25°, straight cuts, corner chamfering, automatic saw positioning for two edge thicknesses (e.g., 0.4 and 1.2 mm), and excess edge adjustment for corner copying * All processing units equipped with chip extraction * Novimat Contour series maintains high processing quality due to powerful corner copying unit and minimal spacing between workpieces (\~300 mm) Basic Technical Data: * Roll edge thickness: 0.3–3 mm * Paper, PVC, and ABS edges: 0.3–3.0 mm * Veneer: 0.5–3.0 mm * Wooden strips: 0.8–20 mm * Edge height: 14–65 mm * Maximum top edge overhang: * Up to 8 mm thickness: 5 mm * Over 8 mm thickness: 2 mm Workpiece Dimensions: * Minimum length (feed direction): 150 mm * Minimum width (for thickness ≤25 mm): 65 mm * Minimum thickness: 8 mm (without flat planer) / 12 mm (with flat planer) Caedpow R S Slofx Addoa * Maximum thickness: * Without corner copying: 60 mm * With corner copying: 40 mm * Smallest workpiece: 150 × 150 mm or 65 × 300 mm (\*65 mm width for max thickness 25 mm) Machine Parameters: * Electronically controlled feed: 6–30 m/min (may be limited by individual units) * Workpiece protrusion beyond feed chain: * 38 mm (edge thickness 0.3–8 mm) * 30 mm (edge thickness 8.1–20 mm) Power Supply: * Voltage: 400/230 V, ±5/–10% with neutral * Frequency: 50 Hz * Control voltage: 230 V AC / 24 V * Compressed air: 8 bar * Extraction air speed: 28 m/s

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Casdpfx Aderhh Sqedja Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Csdpfx Adjwgd Hzjdoaa Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each Cjdpfx Adouch Rfsdeaa 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Year of construction: 1996, condition: excellent (used), machine/vehicle number: MBMA101, Abus / Hert - year of manufacture 1996 / conversion 2014 1-girder suspension crane, bridge crane, crane track, hall crane, gantry crane Payload 1000KG Crane is available 2x: Chassis can be adjusted to the carrier size up to approx. 10-16cm. Incl. complete control, floor operation using a control bottle 2 lifting speeds, 2 strands All cranes can be moved completely electrically in all 3 axes Cjdpfx Adsqqhf Djdoaa Lifting height/hook travel approx. 6m Connection to 400V 16A, built in 1996 Very good used condition Shipping by courier, collection preferred Location 75053 Gondelsheim Please inquire about shipping prices according to zip code, we will make you an immediate, non-binding offer!

Condition: ready for operation (used), functionality: fully functional, Belt sander for narrow elements Cedpfjvuhqbjx Addjaa Specification: • condition - used • 2 belt speeds • right/left rotation • table top dimensions 50 x 50 cm • 1.1 kW (380V) engine • double-sided culaga with a hoof for profiles • culaga adjustable at an angle and up/down • belt width - 40 mm • dimensions - 60 x 60 x 160 cm (length x width x height) Additional information: • good technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site

Year of construction: 2016, condition: like new (used), Good working condition. Comes with controller and electronics. Please check out our other listings as well. Caodpfx Adjh Rknmjdea

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock. Codpfx Aowhxiaeddoaa

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Codpfxehrkrto Addoaa Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-track pallet truck Series. Year of construction 2014 Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Overall height 2160 mm Overall length 1650 mm Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg Casdpohxvuwsfx Addsa - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition