Used Occupational Safety And Health for sale (16,545)

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp + Various SK40 tool holders and collet set (S20x2) Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Redpoyb Su Uefx Ag Njp Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².

Condition: used, tank capacity: 20,000 l, GENERAL Design: horizontal Remarks: Tank with double safety jacket made of Fe (according to DIN 6616D); Test overpressure for tank: 2 bar; Test overpressure for safety double jacket: 0.6 bar; 2 loose saddle supports, Fe; 1 manhole with 600 mm diameter and 1 manhole with 500 mm diameter; Tank without bottom outlet; light exterior protective coating Inner diameter: 2,500 mm Total height: 2,950 mm Total length: 4,700 mm Location: Bremen Nameplate: Rsdpfeyck Ucex Ag Nsp Volume: 20,000 liters Product-contact surface material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 3,800 mm Last application: chemicals TANK Support type: saddle EQUIPMENT Manhole / Dome: on top of the tank Outlet: not present Remark: Manhole cover plated

Condition: new, axle configuration: 2 axles, loading space length: 8,170 mm, loading space width: 2,440 mm, total length: 7,190 mm, total width: 2,420 mm, total height: 1,340 mm, wheelbase: 5,940 mm, Year of construction: 2026, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS - Air suspension - Disc brakes = Notes = New (not yet registered) and immediately available from stock KRONE 20FT ADR chassis with ABS/EBS, ADR (EX/II, EX/III, FL, AT), 20FT flush rear, KRONE axles with disc brakes, 1x20FT, unladen weight: 2,852 kg, max. gross weight: 32,000 kg, 3 units available = Further Information = General Information Year of manufacture: 2026 Registration number: OX-06-BX Rodpjyk Aayefx Ag Nop Axle Configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Weights Unladen weight: 2,852 kg Payload: 29,148 kg Gross vehicle weight: 32,000 kg Functional Body brand: Krone Boxliner SZC 18 eL20 Condition General condition: very good Technical condition: very good Visual condition: very good Further Information Contact Arne Honingh for more information.

Condition: used, mileage: 90,300 km, power: 302 kW (410.61 HP), first registration: 10/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Driving school vehicle with cable-operated dual pedal system and comfort air-suspended center seat with 3-point belts and headrest, BDF swap chassis with a ride height of approx. 1220 mm, suitable for 7150 + 7450 mm long swap bodies, "R-Long-distance cab CR 20 H Highline", SCANIA retarder type R 3500, automatic climate control, rain sensor, auxiliary heater, glass sunroof, roof spoiler, comfort driver's seat (air-suspended and heated), dual electric windows, electrically adjustable and heated exterior mirrors, ABS, ESP, disc brakes with EBS, emergency brake assistant, ACC – adaptive cruise control, driver attention support, LDW – Scania lane departure warning system, traction control, 12-speed SCANIA transmission GRS 905 R with 2-pedal Opticruise, 700-liter aluminum tank (left), 80-liter AdBlue tank, digital tachograph, H7 headlights with automatic low beam, additional high beams in cabin roof, LED daytime running lights, onboard computer, Scania infotainment system with steering wheel controls, multifunction steering wheel, central locking with remote control, external storage compartment (left), trailer coupling (jaw-type) for central axle trailer with dual-circuit brake system, front and rear axles air-suspended with lift and lower function, steering and liftable trailing axle, rear axle differential lock, GVW 26,000 kg / payload 16,721 kg, technically possible total GVW 60,000 kg, wheelbase 4750 mm, well maintained in workshop, very good general condition, ORIGINAL mileage (verifiable), not a rental vehicle! Euro 6D engine (SCR Only), low noise, German vehicle with German documents, sale only to commercial customers! All information is subject to change without notice! Errors and interim sales excepted!---- On request with BDF swap body box (older build years) loading dimensions approx. 7050 x 2430 x 2450 mm! Rsdpfsyi Nn Uox Ag Nsp

Condition: used, mileage: 90,300 km, power: 302 kW (410.61 HP), first registration: 10/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Driving school vehicle with cable-operated dual pedal system and comfort air-suspended center seat with 3-point seat belts and headrest, BDF swap body chassis with an approximate ride height of 1220 mm and suitable for 7150 + 7450 mm long swap bodies. "R" long-distance cab CR 20 H Highline, SCANIA retarder type R 3500, automatic climate control, rain sensor, auxiliary heater, glass sunroof, roof spoiler, air-suspended and heated comfort driver's seat, dual electric window lifts, electrically adjustable and heated exterior mirrors, ABS, ESP, disc brakes with EBS, emergency brake assist, ACC - Adaptive Cruise Control, driver attention assist, LDW – Scania lane departure warning system, traction control, 12-speed SCANIA transmission GRS 905 R with 2-pedal Opticruise, 700 l aluminum tank on the left, 80 l AdBlue tank, digital tachograph, H7 headlights with automatic dipped beam, additional high beams in the cab roof, LED daytime running lights, on-board computer, Scania infotainment system with steering wheel controls, multifunction steering wheel, central locking with remote control, external storage box on the left, tow coupling for central axle trailer with dual-circuit brake system, front and rear air suspension with lifting and lowering function, steered and liftable trailing axle, rear axle differential lock, GVW 26,000 kg / payload 16,721 kg, technically permissible total weight 60,000 kg, wheelbase 4750 mm, well maintained, very good overall condition, ORIGINAL mileage (verifiable), Not a rental vehicle! Euro 6D engine (SCR only), low noise, German vehicle with German documents, sale to commercial customers only! All information without guarantee! Subject to errors and prior sale! ---- On request also available with BDF swap body box (older year of construction): internal loading dimensions approx. 7050 x 2430 x 2450 mm! Rjdpfx Asyi Nn Ijg Nop

Condition: used, Cask Brewing System 6 Head Can Filler, C02 and Seamer Rjdpfx Asymylxsg Nop C/W Printer and Depalletiser

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. Rjdsxqxt Ispfx Ag Nep The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Rodpfxoxqxw To Ag Nop Shipping is possible subject to prior agreement. #8312-2

Condition: used, Year of construction: 2016, functionality: fully functional, Braukon 50hl brewhouse containing a Mash Ton, Lauter Ton and Wort Kettle in the main skid. Skid also contains Whirlpool and Chilled Liquor Tank also. Worth Kettle contains a vapour condenser (heat exchanger) that recovers heat from venting steam to prep the water for the next brew etc. (Returns 15HL hot liquor at 86°C per brew at 4% evaporation) Condenser is only 18-24 months old. Brewhouse is almost completely automated with the exception of hops and salts dosing (that need to be added through the hatches in the brewing vessels), and the cleaning of the Whirlpool (manipulation of hand valves, turning water supply / pump on/off on the control screen). Rodjymyckspfx Ag Nop Brewhouse was commissioned in 2015 Braukon have traveled to service it every year since we've had it, so would expect it to be in much better condition than other similarly aged brewhouses operated by small businesses. Brewhouse was completely CIP'd after every use. CIP System available also. Brewhouse is easily capable of doing 18 brews a week on 18/5, but was never worked even close to that potential. -Mash Kettle "Alloysius" Mash Hydrator Steam jackets and mash mixer (agi.) for temperature stepped mashing -Lauter Tun Maximum charge around 1100Kg malt Discharge via positive displacement "Seepex" pump -Wort Kettle 55hl maximum capacity Vapour Condenser – recovers heat from boiling as hot water returned to Hot Water Tank -Whirlpool Brew length is 50hl i.e. you get about 5000L of wort (beer before it's been fermented) out of each brew. Will complete a brew every 4 hours Estimated 3000 to 3400 brews in it's total lifetime.

Condition: ready for operation (used), Approximately seventy (70) combined measuring and testing devices Gossen Metrawatt for standards-compliant safety testing of electrical equipment are available. 1) Protective conductor resistance (RSL): measuring range: 0Ω-2.100Ω with resolution: 1mΩ, measuring range: 2.11Ω-31Ω with resolution: 10mΩ, test voltage range (DC): 4.5V-9V, min. test current (DC): 200mA. 2) Four-wire measurement (Kelvin measurement). 3) Insulation resistance measurement (RISO): measuring range: 0.05MΩ-1.5MΩ with resolution: 1kΩ, measuring range: 1.01MΩ-10MΩ with resolution: 10kΩ, measuring range: 10.1MΩ-310MΩ with resolution: 100kΩ, test voltages (DC): 50V/100V/250V/500V. 4) Substitute leakage current measurement (IEA/IEGA): measuring range: 0mA-21mA with resolution: 10µA, measuring range: 20mA-120mA with resolution: 100µA. 5) Patient leakage current (medical version): measuring range: 0µA-310µA with resolution: 100nA, measuring range: 0.3mA-2.1mA with resolution: 1µA, measuring range: 2mA-11mA with resolution: 10µA. Including as-new spare parts, 6x housing covers, hinge rods and SI+ modules. Documentation available. An on-site inspection is possible. Rjdsycigwjpfx Ag Nop

Year of construction: 2015, condition: ready for operation (used), A total of 21x Sick 2D area monitoring safety sensor devices are available. Area of application: indoor areas, scanning angle: 270°, protective field range: 2000mm, warning field range: 8000mm, distance measuring range: 30000mm, field sets: 1, fields: 3, resolution: 30mm/40mm/50mm/70mm, angular resolution: 0.5°, response time: 80ms, interfaces: RS-232/RS-422, documentation available. On-site inspection is possible. Redpfxjwydgbj Ag Nop

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. Rsdpoyaik Dsfx Ag Nop 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: unexamined, Ferwood Code: RU0011675 - Manufacturer Code: 4-008-32-1204 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment service, please contact us. 1.5KG - 36X26X21 Rjdpfxjybbtmo Ag Njp

Condition: excellent (used), Your contact persons in our company: Redpfeh T Uwvjx Ag Nop Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are: 01x slide-through protection, used Material color: hot-dip galvanized total length: approx. 2.700 mm U-profile: 50 x 50 mm Agraffe dim.: 335 x 50 mm (HxW) 04x hexagon head screw: M10 x 35 mm 04x Toothed nut: M10 08x washers: M10 Further information: System: SSI Schaefer for type designation: PR350/400 designed for double rack rows suitable f. clear width: approx. 2.700 mm General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Required scope of delivery for push-through protection: 01x U-profile, used Material color: sendzimir galvanized total length: approx. 2.765 mm profile dimension: C: 60x40x8 mm including 2 agraffes Further information: Shelving system: SSI Schäfer suitable f. clear width: approx. 2.700 mm 06x hexagon bolt: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Rjdsh Ekdfepfx Ag Nop Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, SCHNELL Straight and cut OPTIBAT 65T/3/14 Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min 3 Additional cutting level testing photocells. OPTIBAT is very precise Side gangway with safety rail Rsdpfx Agoymcdks Nop Kit for outdoor positioning Length of OPTIBAT: 14 m Feeding unit driven by servomotor: 160 m/min Additional cutting level testing photocells: 3 (OPTIBAT is very precise) Side gangway: with safety rail Kit: for outdoor positioning

Condition: used, power: 18 kW (24.47 HP), Year of construction: 2019, operating hours: 163 h, Empty weight: 2.695 kg Make of engine: Kubota Rjdpeya T Itjfx Ag Njp Top speed: 10 km/h Serial number: WNCR0901THAA00334 Tyre brand: - Transport dimensions (LxWxH): 2.53x1.31x1.75 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system Rsdporcm Rusfx Ag Nop STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 01254653, Production line for manufacturing wooden components for TERTU timber-steel guardrails. Rsdju A Hv Nspfx Ag Nop - Grooving machine T18 - Grooving machine – posts - Crosscut saw - Finishing machine (cutting, drilling) - Feed tables - Drilling table - 4× spare heads - Complete set of spare knives and drill bits Simple, very high-quality, and robust machines. Fully complete and ready for operation.

Condition: used, power: 159 kW (216.18 HP), fuel type: diesel, lifting height: 29,700 mm, Year of construction: 2008, operating hours: 8,474 h, Technical information Make of engine: Perkins Top speed: 40 km/h Empty weight: 23.000 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 756947 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Michellin Rjdpfxowx D Nas Ag Nop Transport dimensions (LxWxH): 7.8x2.5x3.2 Additional information Please contact PFEIFER GROUP for more information

Condition: used, power: 127 kW (172.67 HP), fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2011, operating hours: 7,043 h, Technical information Make of engine: Mercedes-Benz Top speed: 36 km/h Empty weight: 17.500 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 769994 Other information Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: BKT Transport dimensions (LxWxH): 7.96x2.43x3.05 Additional information Rjdpfx Agjv Rk Smo Nep Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 801 h, machine/vehicle number: MC201105-94, Drive: Wheel Redjwkdmpjpfx Ag Nop Empty weight: 5.150 kg Lifting capacity: 363 kg Working height: 1.430 cm Transport dimensions (LxWxH): 3.84x1.76x1.97 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 167 h, machine/vehicle number: MC191218-91, Drive: Wheel Rsdpfx Agotr Nphe Nop Empty weight: 5.150 kg Lifting capacity: 363 kg Working height: 1.430 cm Transport dimensions (LxWxH): 3.84x1.76x1.97 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 187 h, machine/vehicle number: MC191218-93, Drive: Wheel Empty weight: 5.150 kg Lifting capacity: 363 kg Working height: 1.430 cm Transport dimensions (LxWxH): 3.84x1.76x1.97 Rjdpetr Nb Asfx Ag Nop Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 185 h, machine/vehicle number: MC200216-64, Drive: Wheel Empty weight: 1.560 kg Lifting capacity: 230 kg Working height: 780 cm Transport dimensions (LxWxH): 1.86x0.76x1.83 Rsdpfotr N Iksx Ag Nop Please contact PFEIFER GROUP for more information