Used Optics for sale (1,820)

Condition: ready for operation (used), functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, total length: 900 mm, total height: 1,500 mm, overall weight: 32 kg, TECHNICAL DETAILS Measuring Range X-Axis: 200 mm Measuring Range Y-Axis: 200 mm Measuring Range Z: Height measurement via autofocus Measuring Method: Optical / Non-contact Measuring Accuracy: ±2 µm Repeatability: Very high, operator-independent MACHINE DETAILS Camera: High-resolution CCD camera Illumination: Incident / Transmitted / Contour lighting Measuring Time: A few seconds per component Dimensions & Weight Dimensions: 900 mm × 500 mm × 1,500 mm Weight: 32 kg Kwsdpfx Afsyh A Ddeaou EQUIPMENT Length, angle, radius, and diameter measurement Contour and shape measurement Comparative measurement (OK/NOK) Automatic dimension recognition Software: KEYENCE IM software

Condition: ready for operation (used), Telecentric Measuring Machine, Optical Measuring Machine, Part Measuring Machine, Profile Projector, Used Machine Overall Dimensions: Length: 910 mm Width: 700 mm Height: 2100 mm Weight: 155 kg Electrical Specifications: Voltage: 230V Frequency: 50Hz Workpiece Clamping Range: 0–230 mm Cameras: Manufacturer: Cognex Corporation Model: 821-0034-1R Rev B Kjdpsu T I Edefx Afaewu Manufacturer: Vision Control Model: T201/0.12 Applications: This machine is ideal for precision measurement and quality control of workpieces, especially in industries where accurate dimension verification and defect detection are crucial (e.g., automotive, electronics, production lines). The advanced machine vision technology of Cognex and Vision Control cameras ensures fast and reliable measurements.

Condition: used, Tool presetting device SOMET type SPS 500 U Kwjdodzqrtjpfx Afaou Machine no.: S1 Year of construction: 1987 Table surface: 545 x 1000 mm Travel paths: X = 500 mm, Y = 340 mm Width in portal: 550 mm Height table to portal underside: 250 mm - Longitudinal portal guide right and left on the table - Adjustment via very fine threaded spindles with handwheel - Quick adjustment by electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping fixtures for tool measurement - On base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 150 mm Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Kwodpfx Aeyl U S Dsfaeu Maximum feed speed X, Y, Z-axis: 160 mm/s Measuring accuracy (optical sensor) X, Y-axis: Ex, Ey = (1.6 + L/250) µm Measuring accuracy (optical sensor) XY-axis: Exy = (2.0 + L/250) µm Measuring accuracy (optical sensor) Z-axis: Ez = (3.9 + L/200) µm Measuring accuracy (touch-trigger probe) X, Y-axis: Ex, Ey = (2.0 + L/250) µm Measuring accuracy (touch-trigger probe) XY-axis: Exy = (2.5 + L/250) µm Measuring accuracy (touch-trigger probe) Z-axis: Ez = (2.9 + L/200) µm Measuring volume (optical sensor) X: 300 mm Measuring volume (optical sensor) Y: 200 mm Measuring volume (optical sensor) Z: 150 mm Measuring volume (tactile sensor) X: 230 mm Measuring volume (tactile sensor) Y: 200 mm Measuring volume (tactile sensor) Z: 150 mm MACHINE DETAILS Metrology software: PC-DMIS Vision CCD camera zoom: 6.5x CNC-motorized Dimensions & Weight Dimensions (L x W x H): approx. 705 mm x 986 mm x 890 mm Machine weight: approx. 170 kg SCOPE OF DELIVERY PC including measuring software PC-DMIS Vision Documentation / manuals Clamping devices / stops for workpiece fixturing Various probes included Probe changer rack for four probes

Condition: reconditioned (used), Year of construction: 2015, - complete unit - conveyor 2400 mm wide Kodsylhviepfx Afaswu - separation hood - extra metal detector - all manuals included

Year of construction: 2014, operating hours: 20,000 h, condition: used, machine/vehicle number: S410041, Used Optical Separator TiTECH - TOMRA Model Autosort-4 (NIR1) (S-2800) (X-H) Acceleration belt working width: 2800 mm Kodpfxoyh Afhe Afaowu Control cabinet with complete control system Including subframe, platforms, and stairs Plant already dismantled, inspection possible at any time.

Year of construction: 2021, condition: excellent (used), Latest model Tomra Odenberg Halo III optical grader. Perfect for sorting greens, misshapes, mechanical damage, surface blemishes and size outliers. Very low running hours, only used for a short time and then put in to dry storage. Rare opportunity - find another one as new as this. Kjdoxvt Htopfx Afaswu

Year of construction: 2019, condition: ready for operation (used), An automatic optical inspection machine Göpel for inline quality control of electronic printed circuit boards is available. Inspection types: 2D/3D/360°/AOI, viewing angle: 45°, 3D camera module: ViewZ, resolution X/Y: 21µm/10.5µm, component clearance below/above the assembly: 50mm/40mm, max. inspection speed: 100cm²/s, max. inspection dimensions X/Y: 570mm/510mm, max. printed circuit board weight: 5kg, min. printed circuit board width: 80mm, machine dimensions X/Y/Z: approx. 1200mm/1450mm/1650mm, weight: approx. 950kg. Including licences. Documentation available. An on-site inspection is possible. Kwodsymfccepfx Afaeu

Year of construction: 2014, condition: ready for operation (used), Two automatic optical inspection machines Koh Young for inline quality control of electronic printed circuit boards are available. Resolution: 15µm, height accuracy: +/-0%, max. 3D measurement height: 5mm, inspection speed: 18.3cm²/s, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 510mm/580mm, PCB thickness range: 0.4mm-5mm, component clearance below the assembly: 50mm. Machine dimensions X/Y/Z: approx. 1000mm/1270mm/1650mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Kwjdpfeymfciox Afasu

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Select Agroselector 6T-3M optical sorter Brand: Select Model: Agroselector 6T-3M colour Year of manufacture: 2004 Power supply: 400 V Overall dimensions: 1300 x 4000 x 1800 mm Net weight: 600 kg Kwodpfx Aeyku Iisfaju The machine includes: - Control panel: multi-touch "Siemens" screen - Feeding system: vibratory feeder - Construction material: stainless steel The Select Agroselector 6T-3M is an advanced machine for optical sorting of products such as potatoes or other vegetables, based on color analysis. Thanks to its precise detection system and vibratory feeder, the device ensures even distribution of raw material and effective separation of products that do not meet quality standards (e.g., discolored or damaged items). The control system, based on Siemens components, guarantees intuitive operation and process stability.

Condition: excellent (used), We offer a professional KEYENCE VL series 3D optical measurement system, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial applications. Kodpjyc H Npsfx Afaswu The set includes: – VL-550 scanning head – VL-500 base unit – VL-570 control unit – Original KEYENCE calibration plate – Original transport cases – Complete documentation, manuals, and media Condition: very good, well-maintained equipment Note: Set is sold without monitor / PC unit (possibility to equip according to your own preferences) Manufactured: Made in Japan

Condition: ready for operation (used), max. extension approx. 12 linear meters with large-format roller supports, pull-out frames on tripod and Lifthet electric chain hoist, load capacity 1000 kg with guide rails, approx. 40 linear meters to be auctioned at our auction on 19.2.2026 Kwsdpfx Afsyb R Iysasu

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm Kwodpewv Havsfx Afaju - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: ready for operation (used), Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision). Kjdpfsthmffex Afaswu

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Kedpoxu I A Hefx Afajwu

Year of construction: 2004, condition: ready for operation (used), Two Automa-Tech (Altix) exposure machines are available for the PCB industry. 1) ZG 357, running direction: right-left, min. board dimensions X/Y: 530mm/385mm, max. board dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV burner power: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact platesetter ZG 386, min. plate dimensions X/Y/Z: 525mm/351mm/0.5mm, max. plate dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine has a comprehensive and large spare parts package. Numerous spare parts are also available for the ZG series (not this machine). Documentation available. On-site inspection is possible. Individual sale of the machines or spare parts is possible. Kwsdpfx Afovft Rbsaju

Condition: ready for operation (used), Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible. Kwsdpfxov R Exue Afaju

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Kwjdpfx Afotz Dkyeaju

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Kodpfsw Duvzsx Afajwu

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Kedpfx Ajwb E Sbefaewu

Condition: excellent (used), Year of construction: 2016, operating hours: 250 h, functionality: fully functional, machine/vehicle number: PN99516, total height: 860 mm, total width: 660 mm, total length: 560 mm, manhole location: front, type of input current: AC, overall weight: 93 kg, input voltage: 230 V, input frequency: 50 Hz, height adjustment type: electric, Equipment: documentation/manual, For sale: A lightly used Vici Vision Optical Shaft Measuring Machine, being sold as it does not meet our specific requirements. Suitable for shafts and similar components up to Ø90 x 260mm, with an effective measuring range of Ø8 x 100mm. Original price including accessories was CHF 59,595. Last software version and update date: MTL 8.74 (date unknown) Last calibration: 20.03.2023 (certificate available on request) Equipment included: - Vici computer (no monitor, mouse, or keyboard; for demonstration purposes only) - Manual, electrical schematic, operating and maintenance instructions, service engineer's handbook - Center clamp with jaws 0.6-0.8 and jaws 0-6, jaws 0.2-0.4, center for lower tailstock - 6-jaw chuck, collet holder with collets 0.3-1.5 - Screws and 24mm & 32mm open-ended wrenches Technical specifications: Model: MTL X10 Measuring range: Ø8 x 100mm Max. workpiece dimensions: Ø90 x 260mm Max. workpiece weight: 3 kg Kwodox S Nc Sopfx Afasu Diameter measuring accuracy at 20°C: (2 + D[mm]/100) µm Length measuring accuracy at 20°C: (5 + L[mm]/100) µm Pixel size: 2 x 2 µm Repeatability, diameter at 20°C: 0.2 µm Repeatability, length at 20°C: 2 µm Max. vertical traverse speed: 20mm/s Max. rotational speed: 180°/s Machine weight: 93 kg Power supply: 230V – 50/60 Hz Dimensions (L x W x H): 560 x 660 x 860 mm Recommended table size (solid steel frame or granite table): 1250 x 750 x 710 mm

Condition: ready for operation (used), Optical separator scheider Titech Tomra Brand: Titech Tomra Kwjdpfx Afsx Str Roasu Type: Autosort NIR1 S2000 X-L Incl.: belt conveyor length 5000 mm, Beltwidth 2000 mm.

Condition: ready for operation (used), Optical separator Titech Tomra Kedpfx Aox Sttbofaowu Brand: Titech Tomra Type: Autosort NIR1 S2000 X-L

Condition: used, Optics Make Heidenhain Ksdpfxscifpme Afaswu Type OZA II 02 - 6 Device number 2739 Mounting distance 14,30

Year of construction: 2001, condition: used, Optical Sorter Pos. number: LTC00006746 Make: Pulsar Type: Mira B1600 Model: ALG5 LMB006 Frame: stainless steel Electric: 380 Volt – 50 Hz – 8 kW Water: 2-3 bar 20 litre / min Compressed air: 6-8 bar / 1.500 litre / min Features: Conveyor belt (new) 5 digital camera’s processor system Kwodpjhcin Rsfx Afasu air blast rejection system machine was last used for carrots as-is or tested and adjusted to customer needs